Results 1 to 1 of 1
Thread: Dropped off for tuning!!!
-
07-27-2007, 11:05 AM #1
Dropped off for tuning!!!
Well after a long few months of wrenching I finally have my Z at my local tuners for a tune. Told me probably day and a half given the MS3 cam but can't wait to see how she runs especially over 6k and 77 MPH (gear change lowered the 118 MPH limiter to 77) I'll post some numbers as soon as I get them. I don't expect very hig ones based on the loose stall and 9 inch but expect it to be high 300's N/A.
My Toy 00 Z28 1SC A4 - MS3 cam with supporting valvetrain, Milled LS6 heads, LS7 lifters, , ARP rod and mains, All free mods, pacesetters, True duals, moser 9 with 4.11's and Detroit Locker, Vig 3600 tuned, tubular SFC,adj PHR, LCA, adj TA, PHR reloc, LCA reloc. all with poly bushings, ZR1's and Nitto DR's (315).
My other toy 05 GTO LS2 M6- Comp XR269HR cam, 918's, hardened pushrods, Dart Pro 1's, pacesetters, X-pipe, flowmaster 1 chambers, TSP oil pump, Tick master cylinder. Pedders RR bushings, end links, SB bushings, tie rods and strut mounts, total performance poly F&R bushings. Polk DVC 12", Infinity Kappa 6.5 component and 6x9's with corresponding amps.
Her toy 77 F100-6.6/c6. All original (for now)
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks