did i screw up

[Z28_SS]

by ordering the loudmouth 2 exhaust. im scared its going to be really quiet and not loud at all even though i have lt and ory

[Y2KPewterSS]

by ordering the loudmouth 2 exhaust. im scared its going to be really quiet and not loud at all even though i have lt and ory

I am half tempted to sticky this thread just so you can laugh at yourself a week after having your LT+ORY+LM2 setup. Quiet should never even be thought about with this setup.

I think you are going to very happy with your decision

[Mr. Hyde]

If the LM2 isn't loud enough, just order the resonator for $70.00 and get ready to piss off the neighbors! I ordered my Loud Mouth system from the headers back with BOTH the resonator and the muffler because I thought the same way you do. I can't tell you about the muffler, because I haven't put it on yet. The car sounds too good with the resonator. I have the cats though, which help a bit on the raspiness.

[greatwhiteZ28]

it will be louddddddddd

[7camaro7]

by ordering the loudmouth 2 exhaust. im scared its going to be really quiet and not loud at all even though i have lt and ory

that's what dual electric cutouts are made for!

[Z28_SS]

2 more days and i get the exhaust, i cant wait...

[Z28_SS]

it should be an easy install right, should take like 15 minutes maybe?

[Ridinfilthy]

not exactly 15 minutes but it is easy , that thing is going to be so loud i have that setup and it acually annoying sometimes!!!!!!!!!!!

[SSwt00SS]

bout 30min-1hr of time total. takes longer to remove/cut the stock I-pipe than it does to install the system...

no need to worry, your car will be loud...

links in my sig are with LT's/ORY and the LM1 for sound reference...

[Z28_SS]

whoa... why would i have to cut the i-pipe?

[SSwt00SS]

whoa... why would i have to cut the i-pipe?

cause you have to remove it from going up and over the rear axle. im talking about your stock exhaust system, not the SLP LM...

once you get under your car, you will see what i mean...

[Y2KPewterSS]

whoa... why would i have to cut the i-pipe?

Your only options are to cut the old I-pipe or drop the rearend. Otherwise, the old exhaust isn't coming out.

[Z28_SS]

okay this is what i bought

http://www.neweraperformanceparts.com/default.asp?S=503&A=E&PKV=3103931039a|0

the i pipe that is on the car, im no longer going to be using that? so if i cut it it wont matter?

I take it that the cat back that i bought goes all the way up to the y-pipe?

[Z28_SS]

also, am i going to have to do any welding? Because from what i was told, everything is bolt on.

[Z28_SS]

please resond!!!

[LETHALxLS1]

Its all bolt on with clamps. They are talking about cutting the old exhaust in half to get it out from under the car. Other wise you have to take the shock etc. off so it will come off in 1 piece. I got mine welded on instead of the clamps. If you dont like the lm2 I have a lm resonator I can sell you cause I am replacing mine with Borls xr-1. Let me know.

[Z28_SS]

thank you
ill let you know tommarow when i get it on how i like it.

[LETHALxLS1]

No problem- just unbolt the fitting in front of the passenger side rear wheel then use a sawzall or hack saw the pipe behind the same wheel. Its pretty easy and u will see what I mean. If you have any problems let us know.

[Z28_SS]

thank you, you huys are a big help

[Z28_SS]

ahhhhh./........... where is fedex. im so bored i just want to put on my exhaust already!!!!!!!