Decals

[WARP211]

Can you resuse you decals after taken them off the sail panel? "SS" Look like they can go back on. The bowtie looks like I need a new one but I think I could just use some addhesive..

[tatertot91]

Would be very tough IMO.
Maybe if you were very careful and used a roller, but i dont know what kind of adhesive would work best for that. I would dish out and buy new decals. But thats just me.

[WARP211]

Would be very tough IMO.
Maybe if you were very careful and used a roller, but i dont know what kind of adhesive would work best for that. I would dish out and buy new decals. But thats just me.

Where would I be able to get some orginal decals from?

[Teknik_SS]

Dealer! I got some for my cavi and they were only like 15 bucks each for Z24 ones!

[SSNAKEATER23]

i dont think you can reuse decals that you pull off.....they lose their adhesion.

[35th-ANV-SS]

You can look on e-bay also...here is one example.

http://cgi.ebay.com/ebaymotors/2002-...QQcmdZViewItem

[KahanaReef]

If they didn't loose their shape, meaning stretch when you took them off, you can put them back on with a good quality double stick tape like 3M.

[WARP211]

You can look on e-bay also...here is one example.

http://cgi.ebay.com/ebaymotors/2002-...QQcmdZViewItem

Yeah I seen that one.. But I"m looking for a smaller one. one that will fit the berger panel.. the original one will be too big for the berger panel..

[WARP211]

If they didn't loose their shape, meaning stretch when you took them off, you can put them back on with a good quality double stick tape like 3M.

Right on... where would I find some of this double side tape.. walmart? or kargen? No when I took them off I use dental floss to prevent them from stretching...

[SiggyZ]

I'd say if they're still in good shape, you can reuse them and Ms. Reef has the right idea too. Just make sure it's good quality tape.

[KahanaReef]

Usually any home improvement section or craft store will have it. Just don't get the real cheap stuff. You can get rolls up to 2" wide and use an xacto knife to cut it to shape. Or, you can get it in sheets. Sheets are mostly available at craft stores.

[WARP211]

Usually any home improvement section or craft store will have it. Just don't get the real cheap stuff. You can get rolls up to 2" wide and use an xacto knife to cut it to shape. Or, you can get it in sheets. Sheets are mostly available at craft stores.

Right on bro for tha info... will do

[SiggyZ]

That's a woman, not a bro.

Right on bro for tha info... will do

[KahanaReef]

That's a woman, not a bro.

That's OK... It happens all the time

[SiggyZ]

That's OK... It happens all the time

I suppose I can understand that, bro.

[WARP211]

opps...... my bad...