1st mod

[guitarhead09]

whats up guys, what do you think i should put on 1st

lowering springs
cat back exhaust
slp intake
short shifter
or some thing else

what do you think

[hamburger68]

lid (any brand) + catback will really wake up your car! (also: better gas mileage)

[SSwt00SS]

LID, Cat-back, SFC's (subframe connectors)

[Vexzer]

Wide Wheels & Tires
Short Shifter
Cutout
Radar Detector
Intake

[guitarhead09]

Wide Wheels & Tires
Short Shifter
Cutout
Radar Detector
Intake

I already put c6 corvette rims, 18's in the back and 17's in the front, I have 295 40 18's in the back and they almost rub.


Whats the cut out?

[danziger]

Lid and SFCs should be mandatory...

[cavpat]

lid (any brand) + catback will really wake up your car! (also: better gas mileage)

plus 1

[fast enough Z28]

Free mods first then lid and catback with a cutout. A cutout is welded to the exhaust after the y pipe and can be open up for more sound and horsepower whenever you want to unscrew the three wing nuts holding it together. About $100 for the lid,$400 to $800 for the catback, and $30 to $40 for the cutout. You could also put an electric cutout if you wnated to spend about $150.

[Vexzer]

Free mods first then lid and catback with a cutout. A cutout is welded to the exhaust after the y pipe and can be open up for more sound and horsepower whenever you want to unscrew the three wing nuts holding it together. About $100 for the lid,$400 to $800 for the catback, and $30 to $40 for the cutout. You could also put an electric cutout if you wnated to spend about $150.

What he said. Then add Cam.

[kebie05]

hey guitarhead, can we see some pics of those c6 rims you got? i have been thinking about them too. thanks.

[kebie05]

what is the big rush on sfc? are they needed that early in the mod? thanks guys.

[Y2KPewterSS]

what is the big rush on sfc? are they needed that early in the mod? thanks guys.

Its the best thing you can do for your car. It prevents twisting up the car, stops squeaks and rattles as well.

[kebie05]

Whats The Best Kind Or Place To Get The Sfc At? How Much They Usually Run? Thanks....

[guitarhead09]

yeah hey, the rims look awesome, i will put picks up when the sun go's down a little bit. But hey what are some FREE mods??

[Y2KPewterSS]

Whats The Best Kind Or Place To Get The Sfc At? How Much They Usually Run? Thanks....

http://www.ls1.com/forums/showthread.php?t=33711

Check out that thread or any of the site sponsors.

[kebie05]

did you get to take pics of the rims yet?

[bluefields88]

lid, SFC's, and a cat-back. I did them all first and I loved each and every one! can't go wrong my man!

[GraigZ28]

Lid, all about the same
Cat Back Exhaust, I perfer Borla
Strut Tower Brace, 2 or 3 point, REALLY makes for a smooooth ride.
Short Throw Shifter, I like the B&M Ripper.

That's how I spent my money.