19 inch z06 rims on 2000 Camaro

**Joey Allen** · 03-28-2016, 08:22 AM

Trying to put 19 inch z06 rims on my 2000 Camaro ss. I see I'm gonna have to add adapters to the rear. What will I have to do if anything to fit the front? Thanks

**raynor139** · 03-28-2016, 10:05 AM

Are you buying replicas with a camaro offset? Also what width are they going to be? Finally what tire size are planning on. If you buy narrow enough replicas you shouldn't need a spacer in the rear. If your buying a set off a actual vette then yeah you will need them.

The front is more forgiving then the rear so depending on size and all will depend on what you need.

I run 18 x 10.5 all around and only needed to grind the bump stops in the rear down some. But mine are replicas with f body specs.

**Joey Allen** · 03-28-2016, 02:33 PM

I already have the rims and tires they are true corvette rims.rear is 12" wide 325/30r19 and the front are 10 1/2 wide 275/35r18. Tried putting the back on with spacers driver side barely fit but pass would not.been told the sell adapters for the back to set them out further so had them ordered.still have spacers so could use them on front if necessary.

**Whamhammer** · 03-29-2016, 02:34 PM

Originally Posted by Joey Allen

I already have the rims and tires they are true corvette rims.rear is 12" wide 325/30r19 and the front are 10 1/2 wide 275/35r18. Tried putting the back on with spacers driver side barely fit but pass would not.been told the sell adapters for the back to set them out further so had them ordered.still have spacers so could use them on front if necessary.

My psychic powers are telling me that there will be a "quarter panel lip mod" in this Camaro's future. 😄