Results 1 to 18 of 18
-
02-05-2008, 01:40 PM #1
WTB Everything Needed To Do A T56 Swap in LS1 Car
Ive got a 99 Trans Am and im trying to gather parts to do a t56 swap, let me know what ya got.
Thanks
-
02-05-2008, 03:42 PM #2
-
02-05-2008, 03:48 PM #3
EddieIB did one, shhot him a pm, he is on western members a lot
-
02-05-2008, 03:52 PM #4
-
02-07-2008, 09:30 PM #5
-
02-07-2008, 10:34 PM #6
- Join Date
- Mar 2006
- Location
- WI
- Posts
- 5,085
- iTrader
- 0
- Blog Entries
- 1
09 EclipseGT 75 Chevy 4x4- 2001 Trans-Am 13 F-XT
I have a stock shifter to offer.
-
02-08-2008, 03:59 AM #7
- Join Date
- Dec 2007
- Location
- Upstate NY
- Posts
- 93
- iTrader
- 0
Black- 2000 WS6
I have a stock flywheel as well I will sell real cheap...
-
02-08-2008, 03:34 PM #8
Hey Thanks for the Replys guys, I actually just got a Flywheel today but thank you for the offer.
I have a Stock shifter already too but all i have is the base and the rubber boot, Might be Interested in the Stick and Knob if you have eather of those. Thanks
-
02-08-2008, 03:42 PM #9
Parts i have so far are.... Shifter base, lower shift boot, 6 speed console with leather boot, Flywheel, Crossmember, and torque arm mount.
Parts I Need are: Complete Pedal assembly with all switches and clips.. Complete Hydrolics everything....... Clutch disc and PP...... I need all the Little misc parts too
Thanks
-
02-11-2008, 07:43 PM #10
-
02-16-2008, 03:06 AM #11
- Join Date
- Dec 2007
- Location
- indiana
- Posts
- 9
- iTrader
- 0
orange- 1969 camaro
Here's what I have, can tou use any of them
AC. COMPRESSOR $100.00 OBO
POWER STEERING PUMP $40.00
EXT. MANIFOLDS $100.00 OBO
SET OF PEDDLES FOR 6SP CAR 75.00
Clutch master cylinder $ 45.00
TRANS. MOUNT $20.00
-
02-16-2008, 10:15 PM #12
-
02-16-2008, 10:35 PM #13
Ok updating parts list.
The parts I have are
-Shifter
-all the boots
-6-speed console
-Flywheel, Clutch disc and PP
-t56 crossmember
-t56 torque arm mount
-Master Cylinder (01,02) style
Parts I still need are.
-t56 Exhaust Mount (bolts to trans to support stock y-pipe)
-Pedals (with switches and rod clips)
-Slave
-torque arm mount (BOLTS) just need the bolts, I dont know if the bolts from the A4 mount will work?
-inspection cover
-Clutch alignment tool
Thanks
-
02-17-2008, 10:29 AM #14
- Join Date
- Dec 2007
- Location
- indiana
- Posts
- 9
- iTrader
- 0
orange- 1969 camaro
The parts are off a 2002 SS camaro. I not sure what switch you are talking about but I can send you a pic. of the peddels if you want.
I just went and check the part, there are four switches two on the brake peddels and two on the clutch peddel
-
02-17-2008, 06:09 PM #15
-
02-29-2008, 04:48 AM #16
I have a whole car 98 ws6 with 40,000 miles I will sale anything. It is at my buddys shop give him a call. and ask about the 98 TA convertable that is geting parted out. 1-800-680-2959 Thanks chad 6speed
-
11-26-2008, 03:09 PM #17
parts you need in one package
I have a 2000 camaro with 67,000 with Moser Ford 9" with 3.50 gears, aluminum center section w/Detroit Truetrac, UMI frame connectors, LCA's and Edelbrock torque arm, mCCLEOD adjustable master cylinder and drill mod done, new slave cylinder, Spec Stage 3 clutch, and aluminum flywheel, Kooks 1 3/4" Stainless headers Jet Hot Coated and ORY pipe. Very low miles on all, call 856-340-6023 for more info. Asking 4000 for car, I will be holding on to engine, 442 rwhp, 445 rwtq. Car suffered front end damage and t top damage after hydroplaning off highway under cables on side of road. Going to start fresh next year, might just wait on 2010 Camaro.
-
11-30-2008, 11:35 AM #18
- Join Date
- Oct 2008
- Location
- NJ
- Posts
- 2
- iTrader
- 0
VR- 1993
If your still interested I have a complete pedal assembly from a 2004 pontiac gto
jqh777@gmail.com
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
ls1 to ls6 swap help needed
By nvmybird in forum General HelpReplies: 1Last Post: 07-01-2010, 04:59 AM -
Advice needed on LQ9 swap for LS1
By wormus in forum Internal EngineReplies: 29Last Post: 05-20-2010, 09:55 PM -
everything needed for m6 to a4 swap
By shftn6 in forum Automatic TransmissionReplies: 3Last Post: 04-02-2006, 02:41 PM -
everything needed for m6 to a4 swap
By shftn6 in forum General HelpReplies: 6Last Post: 03-07-2006, 03:14 PM -
Needed: 3rd gen LS1 swap items
By KILLSWITCH ETERNAL in forum Parts Wanted / TradeReplies: 2Last Post: 12-31-2005, 05:19 AM
Bookmarks