ls1 ls6 heads and cam

[99-SS-Conv]

looking for different heads will consider anykind thanks

[Bob K]

I'm getting ready to swap my engine with a 402. I'll have a set of LS6 heads with a little 1K miles on them since new. (Ti retainers and 918 springs) and MTI R1 cam (232/236 .575 114) available.

I'm looking for 500.00 for the heads and 200.00 for the cam.

I made 420 RWHP with this combo.

Bob K.

[Hurley711]

I'm getting ready to swap my engine with a 402. I'll have a set of LS6 heads with a little 1K miles on them since new. (Ti retainers and 918 springs) and MTI R1 cam (232/236 .575 114) available.

I'm looking for 500.00 for the heads and 200.00 for the cam.

I made 420 RWHP with this combo.

Bob K.

Heads stock or ported?

[Bob K]

Heads stock or ported?

They were cleaned up by a local shop. I'm trying to get the flow sheet.

Bob K.

[99-SS-Conv]

please could you send pics to mspear@verizon.net thanks

[99-SS-Conv]

and do you have a ls6 intake manifold and trottle body? and what kind of car did u make 420 rwhp?

[Bob K]

I have the LS6 intake, Ported throttle body, and Vararam CAI.

I don't have pictures of the heads yet as I'm just getting ready to drop the driveline, and I won't start on the engine disassembly until it's down.

I've got a new 402 with L92 heads/L76 intake going in.

The car is a '00 C5. It has 4:10's which actually make the total a little lower than you would get with 3:23's or 4:10's.

Bob K.

[99-SS-Conv]

is the intake manifold and throttle body 4 sale too?

and with the heads is that a complete kit

[99-SS-Conv]

anybody i need to buy

[Bob K]

Call me about the heads/intake. 215-945-6379

Bob K.

[txcosmos]

I have stock heads off of a 04 GTO, upgraded dual springs....