LS1 Heads

[OnEbAdReDSS]

Anyone got a pair... my heads are fed up... i just need a pair.. for a good price

[OnEbAdReDSS]

bump

[01blackbird]

I have a set of low mileage (approx. 15,000 miles) stock heads casting #241 that I might just let them go. I've been keeping them for spares in case I've needed them but I only put on about 3,000 miles a year on my car so they have just been resting around. Keep in mind, shipping is pretty costly, probably over $50. I won't take no less than $150.00 for the heads. They also come with the original valves and springs still intact.

[OnEbAdReDSS]

bump

[98formy]

I have some 853 heads, if you have perimeter bolt heads, i would let them go for 20 bucks plus whatever shipping is, plus they have new valve springs and retainers.

[OnEbAdReDSS]

853? isn't that the ls1 98 heads... will those fit on the 2000?

[juiced99ws6]

yes but they flow is slightly worse and you would need new valve covers and have to mount the coil packs directly to the valve covers instead of useing that bracket that makes everything neater

[juiced99ws6]

that price is definatly good though so you could use the cash savings and have the ported

[Y2KPewterSS]

853s were from the 99-2000 LS1s, not 98s. The 853s would be center bolt, not perimeter.

[0rion]

806's were perimeter

[OnEbAdReDSS]

hmm in my book 853's were 97-98 and also 99-00 the center bolt was the difference.. hmm hey 98 would you take a pic of the top of the head and the casting number? if you could

[98formy]

I can get a pic later, but I know they are 853's (99% sure) with the perimeter bolt valve covers. They are off my 98 LS1.

[OnEbAdReDSS]

ya i don't have those valve covers plus where would i mount my coils...

[juiced99ws6]

coils will mount right on top of the valves covers on the perimeter bolt heads... you just dont use that bracket and it makes it a bit more work. Umm as for valve covers you would just have to hunt around for a used pair..