looking for 01 t/a keyless remote

[naperws6]

need one remote for a 01 fbody let me know what you have and please pm the codes on the back of remote to see if compatible.

[lsgunner28]

try ebay, thats where i got mine with instructions on how to program for like $15 if i remember right. looks identical.

[lsgunner28]

http://cgi.ebay.com/ebaymotors/Camar...item3ca71764f2
http://cgi.ebay.com/ebaymotors/camar...item19bb40fe4e
http://cgi.ebay.com/ebaymotors/1996-...item45f1c90c6d

[naperws6]

thanks thats cheap.

[naperws6]

anyone?

[blackcar]

I've got one in mint condition. Bought my car new and I'm the only one to ever drive it. Put the spare up in the closet and never used it. I will try to remember to get the code tonight.

[naperws6]

I've got one in mint condition. Bought my car new and I'm the only one to ever drive it. Put the spare up in the closet and never used it. I will try to remember to get the code tonight.

thanks and PM the price and code.

[KahanaReef]

These are the instructions that came with my replacement key fob. Worked like a charm

Key less remote Programing steps…..

1. Turn the ignition switch to the OFF position.


2. Remove the RADIO fuse.


3. Cycle the ignition switch from the OFF position to the RUN position (as far as you can go without cranking the engine) 3 times within 5 second ending in the RUN position. The vehicle will verify entry into the programming mode by locking then unlocking the door locks.


4. Press and hold both the LOCK and UNLOCK buttons on the first transmitter for approximately 15 seconds. The vehicle will verify programming by locking then unlocking the door locks. Your new remote has been accepted and all existing remote codes have been erased.


5. Repeat the previous step for each additional transmitter (including any existing transmitters). You may program up to 4 transmitters. This must be done before the RADIO fuse is reinstalled.


6. Place the ignition switch in the OFF position. IMPORTANT: The remote key less entry system will not be operational if the radio fuse is open.


7. Replace the RADIO fuse. If at any time it is necessary to restart the procedure, turn the ignition OFF and proceed again with step number 1.

[naperws6]

Thanks I got that from google.com but thats not the problem I need a keyless entry remote. Thanks for the info.

[KahanaReef]

Thanks I got that from google.com but thats not the problem I need a keyless entry remote. Thanks for the info.

When you said you wanted the code, I figured you wanted the reprogramming instructions for the remote.

[98CamaroSS]

Here you go, right from the factory and never used. I'll sell you only one though as I want to keep one. LMK.

[Schmalgar]

Forgive me for slightly hijacking this for a moment. But does the 'rear 2x' button pop the hatch for you guys? It doesn't for me. But on my last TA I know that there was a button for the hatch, don't remember if it was called 'rear 2x' or not...

[naperws6]

Here you go, right from the factory and never used. I'll sell you only one though as I want to keep one. LMK.

If my other deal falls thru I will let you know. Thanks.

Forgive me for slightly hijacking this for a moment. But does the 'rear 2x' button pop the hatch for you guys? It doesn't for me. But on my last TA I know that there was a button for the hatch, don't remember if it was called 'rear 2x' or not...

Yes 2x opens hatch.

[Schmalgar]

Yes 2x opens hatch.

Roger that, thanks. How rude that mine doesn't!

[naperws6]

I've got one in mint condition. Bought my car new and I'm the only one to ever drive it. Put the spare up in the closet and never used it. I will try to remember to get the code tonight.

thanks for the remote and looks new. left you a feedback.

[blackcar]

That remote had literally sat in the closet since Oct of 2001.