Results 1 to 11 of 11
-
12-31-2007, 08:06 AM #1
- Join Date
- Dec 2007
- Location
- Ohio
- Posts
- 6
- iTrader
- 0
White w/Red Stripes- 1992 Camaro RS
350 Bored .60 over need PARTS FOR 400+ hp
I have a 350 chevy 4 bolt main bored .60 over
I'm going for 390-430 horsepower
I need The following
Heads (lt1, ls1, l31, fastburns etc)
Camshaft (4.80-5.10 lift)
Crankshaft (possibly)
Pistons
650cfm Carb
Intake Manfold
Valve Covers
Don't have much to trade with unless you want a 700r4 or a complete 305 80000 miles
-
12-31-2007, 01:00 PM #2
- Join Date
- Dec 2007
- Location
- Ohio
- Posts
- 6
- iTrader
- 0
White w/Red Stripes- 1992 Camaro RS
also need a 2 or 4" cowl induction hood and a polished grill for a 92' Camaro.
-
12-31-2007, 07:59 PM #3
ok so you have an old style 350? the heads would have to be for the old style block I may have a set they will need rebuilt
the old style crank is the same from a 305 and 350 the rods are different in some years and the later blocks had the 1 piece rear main seal
let me know what year engine you are building and I may be able to help
-
01-01-2008, 04:36 AM #4
- Join Date
- Dec 2007
- Location
- New Jersey
- Posts
- 38
- iTrader
- 0
I don't think he knows what he's really looking for? None of those parts in the needed list for heads along interchage? What exactly do you need?
-
01-01-2008, 05:01 PM #5
- Join Date
- Dec 2007
- Location
- Ohio
- Posts
- 6
- iTrader
- 0
White w/Red Stripes- 1992 Camaro RS
It came out of a van from the early 1990's. I thought they did away with 4 bolt mains in the 80's for chevys?? But the dipstick is on the passenger side so it has to be a newer style block.
-
01-01-2008, 07:42 PM #6
I think some were still 4 bolt main but at 400 hp 2 bolt woul do fine get a set of vortec heads and a decent cam and around 10 to 1 compression to get in the 400 range
-
01-07-2008, 09:07 PM #7
- Join Date
- Aug 2005
- Location
- cleveland ohio
- Posts
- 11,373
- iTrader
- 48 (100%)
trans am 00 ws6- 1998 camaro ss vert
man i have everything you need brand new still in boxes from when i was going to do a swap into my 87 monte ss. pm me and i'll get you all he part numbers. everything is new from summit i have over 4k into these parts.
brand new heads (pretty sure they are darts 2's 2.02 160, rockers, cam, lifters, push rods, i have pistons, never used but put into the block. used intake. with this set up it should be about 385- 440 hp.
let me know. thanks jeremy
-
01-08-2008, 07:55 AM #8
- Join Date
- Dec 2007
- Location
- Ohio
- Posts
- 6
- iTrader
- 0
White w/Red Stripes- 1992 Camaro RS
very interested, i sent you a pm
-
01-11-2008, 08:16 AM #9
- Join Date
- Dec 2007
- Location
- Ohio
- Posts
- 6
- iTrader
- 0
White w/Red Stripes- 1992 Camaro RS
My motor just got out of the shop, still need everything.
-
01-22-2008, 01:58 PM #10
i have everything you want.i own a machine and have many old style Gm parts sitting around,pistons,crankshaft w/fresh grind or not,intakes,and lots of extra parts.PM me or just call 734-716-7170 Dave
-
02-18-2008, 05:57 AM #11
- Join Date
- Dec 2007
- Location
- Ohio
- Posts
- 6
- iTrader
- 0
White w/Red Stripes- 1992 Camaro RS
Still need a camshaft, intake, carb, rockers any help would be appriciated!
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Bored on the CL...
By SHines-IT in forum Almost Anything GoesReplies: 2Last Post: 12-30-2009, 06:09 AM -
I was bored too
By LimeNine in forum Camaro / SSReplies: 2Last Post: 02-10-2008, 11:24 AM -
Bored...
By DanWS6 in forum Rocky Mountain MembersReplies: 10Last Post: 03-04-2007, 08:25 AM -
bored
By issues in forum Almost Anything GoesReplies: 5Last Post: 08-13-2006, 09:56 AM -
forged and bored VS bored stock block
By third_shift|studios in forum Internal EngineReplies: 14Last Post: 05-15-2006, 06:33 PM
Bookmarks