Results 1 to 17 of 17
Thread: Wicked built motor! 95 lt1.
-
06-05-2007, 07:27 PM #1
- Join Date
- Jan 2007
- Location
- Chicagoland
- Posts
- 52
- iTrader
- 0
Wicked built motor! 95 lt1.
YOU PULL AND I WILL HELP OUT, YOU CAN TAKE WHATEVER WIRING YOU NEED AS WELL. MOTOR WILL INCLUDE MSD 6 BTM AND GEN 6 DFI WITH LAPTOP
__________________________________________________ ________
Motor- WILL NOT BE PARTED OUT
383ci stroker: less than 7,000 miles.
Internally balanced, blueprinted, decked/Bored .030 over lt-1 block
ARP bolts/studs used where applicable
Eagle 4340 internally balanced crank
Eagle "h" beam connecting rods
Comp Cams high energy hydraulic lifters
Comp Cams 1.6 roller rocker
Comp Cams chromemoly pushrods
Cloyes double roller timing chain
Wiseco dish pistons/ring kit with floating wrist pins
Comp Cam custom 230/244 cam .580 lift w/114
lobe seperation
setup for roughly 10/10.5-1 compression
NGK TR-55 plugs
MSD 8.5 wires
New vented '95 opti spark
Mellings high volume oil pump
Intake
ported and polished lt-1 intake(to match heads and throttle body)
BBK 58mm throttle body
Throttle body coolant bypass
ported and polished lt-1 heads with Ferrea valves, guides, retainers
AFR Hydra rev kit
AERO adjustable fuel pressure regulator
EGR delete
Ford 30lb injectors
SLP CAI
Hooker headers
PUTS 400hp to the rear wheels.
$6000
40 minutes from chicago, come pick it up! will take some paypal and some cash, what ever combo u gotta do if you need to use credit cards.
-
06-06-2007, 03:39 PM #2
- Join Date
- Jan 2007
- Location
- Chicagoland
- Posts
- 52
- iTrader
- 0
anyone? can cut the buyer a good deal on a t56 swap if they need it or an array of suspension parts or a ttop conversion, interior pieces, a 10 bolt year end, rims, exhaust a lowering kit...im parting my car out and the motor has to be the 1st to go, the buyer gets preference on any of my other parts!
-
06-07-2007, 05:50 PM #3
- Join Date
- Jan 2007
- Location
- Chicagoland
- Posts
- 52
- iTrader
- 0
bump
-
06-12-2007, 03:22 AM #4
- Join Date
- Jan 2007
- Location
- Chicagoland
- Posts
- 52
- iTrader
- 0
bump for my motor
-
06-17-2007, 10:03 AM #5
- Join Date
- Jan 2007
- Location
- Chicagoland
- Posts
- 52
- iTrader
- 0
5300!
-
06-20-2007, 11:10 AM #6
-
06-20-2007, 12:34 PM #7
- Join Date
- May 2007
- Location
- Amarillo, Texas
- Posts
- 371
- iTrader
- 2 (100%)
Polo Green Metallic- 1995 Camaro Z28
Man I had a simliar setup and the best way to get your money out of it is to part it out. Just a suggestion
-
06-20-2007, 12:59 PM #8
- Join Date
- Jan 2007
- Location
- Chicagoland
- Posts
- 52
- iTrader
- 0
i dont have time to deal with all that man, I work usually 10-12 hours a day and dont have the desire to rip it apart to piece it out, its a great deal for someone looking to use the whole set up or even just the pieces they want and resell the rest.
440- i am not taking parts off of it at this time.
-
06-20-2007, 01:23 PM #9
-
06-20-2007, 06:08 PM #10
- Join Date
- May 2007
- Location
- Amarillo, Texas
- Posts
- 371
- iTrader
- 2 (100%)
Polo Green Metallic- 1995 Camaro Z28
440 here is a link to a tb for ya
http://cgi.ebay.com/ebaymotors/Edelb...spagenameZWDVW
-
06-20-2007, 06:44 PM #11
- Join Date
- Jan 2007
- Location
- Chicagoland
- Posts
- 52
- iTrader
- 0
-
06-21-2007, 11:26 AM #12
- Join Date
- Jul 2005
- Location
- Canada
- Age
- 44
- Posts
- 9,481
- iTrader
- 8 (100%)
Blood Red- Z28
Is it possible to post up some pictures?
Or is the engine still in the car?
Also is the price including the tranny?
-
06-21-2007, 11:44 AM #13
- Join Date
- May 2007
- Location
- Amarillo, Texas
- Posts
- 371
- iTrader
- 2 (100%)
Polo Green Metallic- 1995 Camaro Z28
Hey Sexonwheels did you get the pics I sent you?
-
06-21-2007, 11:46 AM #14
-
06-21-2007, 11:56 AM #15
-
06-21-2007, 01:15 PM #16
- Join Date
- Jan 2007
- Location
- Chicagoland
- Posts
- 52
- iTrader
- 0
-
06-22-2007, 02:57 PM #17
- Join Date
- Jan 2007
- Location
- Chicagoland
- Posts
- 52
- iTrader
- 0
bump! anyone??
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
cam help on built motor
By fast93ta in forum Internal EngineReplies: 3Last Post: 07-18-2008, 01:43 PM -
Dyno Testing A Home-Built Pontiac Motor - Backyard-Built Bruiser
By Ed Blown Vert in forum Firebird / WS6Replies: 0Last Post: 06-01-2007, 10:00 AM -
Dyno Testing A Home-Built Pontiac Motor - Backyard-Built Bruiser
By Ed Blown Vert in forum Firebird / WS6Replies: 0Last Post: 05-18-2007, 07:10 AM -
forsale:built ls1 motor
By joe schirf in forum Parts For Sale / TradeReplies: 12Last Post: 06-12-2006, 02:45 PM -
Best built motor to buy
By Ws6gerb10 in forum Firebird / WS6Replies: 2Last Post: 04-22-2006, 03:33 PM
Bookmarks