Various LSx parts for sale

**Chevythunder17** · 12-07-2007, 01:57 AM

Racetronix 48 lb/hr injectors - never used, bought them October but since I'm selling the car I don't need these. Still in the original packaging. I believe these are rated at 3 bar (~43 psi) so they are about 55 lb/hrs on LSx applications. $275

Manley dual valve springs w/ titanium retainers and valve seats, they were used for a warm up cycle on an engine $200

4 16" Firehawk wheels with brand new BF Goodrich 225/50/16 tires (all seasons) mounted and balanced on them. I will not separate these. $350

FMS Custom Cam, 224/230 .588/.595 on a 114LSA (good blower cam) $250

TSP 'Giant Camshaft', 248/254, .611/.613 on a 113 LSA I believe. 2300-6800 RPM power band with a peak around 6400rpm. This was designed for 400+ cubic inch engines. Only used for about 3K before changing the setup around. $250

Turbo hotside pipe, good for a custom setup. It has a T-4 flange and is coated and wrapped w/ fiberglass header wrap to help keep the heat in. This tubing does NOT require you to move the A/C or alternator. You can go up to an 80mm turbo with this setup. I never installed this setup on my car, ergo no pics. I believe it is a Phamspeed setup. $450

Thanks for looking!

**Chevythunder17** · 12-08-2007, 05:22 PM

Turbo pipe pics. I'm selling just the pipe that goes from the manifolds to the turbo. You need to fab up a downpipe, and all the cold-side pipes.

**Chevythunder17** · 12-10-2007, 05:37 AM

Bump again.

**SINISTER-TA** · 12-12-2007, 07:13 AM

PM sent...

**Chevythunder17** · 01-04-2008, 07:22 PM

Bump!

**Chevythunder17** · 01-08-2008, 06:24 PM

Bump!

**Chevythunder17** · 01-13-2008, 06:03 PM

Bump.

**joejenkinsglass** · 01-24-2008, 04:10 PM

is the turbo hot pipe still available? it is a direct bolt on withot moving anything? I have pm'ed you before but since deleted all of them

thanks; Joe

**Chevythunder17** · 01-24-2008, 04:39 PM

It is. It'll bolt directly up to manifolds, alternator and AC pump stay as is. I believe I have some pics earlier in the thread.

**joejenkinsglass** · 01-24-2008, 05:35 PM

what is your bottom dollar shipped also does it have a spot for the bov?

**Chevythunder17** · 01-24-2008, 05:48 PM

This is just the hotpipe, which does have the provision for the wastegate (which is what I think you meant). The BOV goes between the compressor outlet and the throttle.

I'd do $400 shipped (shipping isn't cheap for this as it doesn't go in a box).

**Chevythunder17** · 01-26-2008, 12:43 PM

Turbo hotpipe is pending (awaiting payment).

**joejenkinsglass** · 01-26-2008, 06:19 PM

Originally Posted by Chevythunder17

Turbo hotpipe is pending (awaiting payment).

done

**Chevythunder17** · 01-26-2008, 06:25 PM

Turbo pipe is SOLD!

**theslow00** · 01-27-2008, 07:55 PM

what are the springs good till .650? pm me.

**RedMetal** · 03-16-2008, 01:58 PM

PM sent

**Chevythunder17** · 03-16-2008, 02:52 PM

I have a Futral cam, specs are 253/261 .644/.622 on a 110 LSA. Price I'm asking is $250 shipped

The other stuff listed is gone.

**Chaz614** · 04-25-2008, 07:50 AM

wheels and tires still for sale??

Thread: Various LSx parts for sale

Thread Tools