Results 1 to 20 of 110
Thread: Stock LS1 Engine Parts F/S
-
04-01-2007, 01:14 PM #1
Stock LS1 Engine Parts F/S
DO NOT BUY FROM THIS PERSON
I have either upgraded or replaced every part that is listed here...All parts are in great working condition unless otherwise noted. If you are interested in a certain part please let me know and I will get you a price. I am easy to work with so make offers. I would like to have these parts picked up locally to avoid shipping fees but I will ship if neccesary. If you would like to contact me regarding any parts listed I can be reached at 903-883-5250. Ask for Jeremy.....
*All Parts Listed Are In Great Working Condition Unless Otherwise Noted*
-Complete Radiator w/cap, hoses, 160 degree stat, sensor,
and A/C condensor....sold fans
-Stock MAF
-Stock Air Induction System with an MTI Whisper Lid and stock lid.
-Stock LS1 Intake Manifold with fuelrail (Injectors NOT Included)
-Stock engine pulleys, brackets, nuts and bolts.
I sold the tensioner pulley (attached to water pump) and
engine bolts. Still have the rest of the accessory brackets
and pulleys.
-Stock Valve Covers with oil cap assembly
SOLD-Heavy Duty CompCams pushrods (used for one month)
-Stock Roller Rockers
-Rocker Arm guideplates
-Oil pump and pickup tube
-Valley Pan Cover
-Vacuum lines
-Timing and Oil Pump Cover
-A/C compressor with hoses and connectors.
-Alternator (rebuilt and used for about a month)
-EGR Valve and tubing
-Power Steering Pump
-Motor Mounts (Great Condition)
-Stock Crank Pulley
-Hardly Used Stock Timing Chain and Large Sprocket
-6 month old starter (OEM from dealer)
SOLD--Centerforce Stage 2 Clutch and Pressure Plate w/SLP Flywheel. I will take no less than $200 for all clutch components. Shipping NOT INCLUDED!!!---SOLD
(All of the clutch components were bought and used for about a month before being removed and listed here. I am having the flywheel resurfaced ANYWAYS to ensure out of box installation to buyer.) I will email pics if interested. Contact me for more info.....
If there is an engine part not listed here that you need just shoot me an email. There is a good chance I have it here. Email me for pics as well, just be specific as to what part is needed.
***Water Pump and Pulley***
(I am not sure of working condition of the water pump, it was leaking through the pisshole when removed from engine)
Again my email is Oilfieldstud1106@aol.com and my contact number is 903-883-5250. All parts are located in Greenville, TX (About 30 minutes EAST of Dallas).
Jeremy....
-Last edited by mrr23; 08-08-2007 at 01:58 PM.
-
04-02-2007, 01:52 AM #2
1st Bump
A.M, Bump
Hey guys I need to get rid of this stuff. Shoot over some offers to my email address or give me a ring. I don't have access to the PM's yet so don't waste your time. CHEAP GOOD PARTS!!!
Oh and all the parts that aren't listed as being replaced have approx. 85K on them. I take immaculate care of my ride, she is more important than my wife, lol.
-
04-02-2007, 06:22 AM #3
- Join Date
- Jan 2007
- Location
- Orlando, Fl
- Age
- 40
- Posts
- 58
- iTrader
- 1 (100%)
White- 1999 Camaro SS
sent you and email, and gave you a call.
-
04-02-2007, 10:25 AM #4
When?
Hey what time did you call and what is your #? I will call you ASAP. Thanks
-
04-02-2007, 05:01 PM #5
Can you list some prices on this stuff?
thanks
---Justin
-
04-02-2007, 06:08 PM #6
Parts??
Hey what parts do you need and I will give you a price on those parts. The reason I didn't list prices is so I could work with people. Shoot me an email with what you need and I will give you some numbers. Later dude!
-
04-02-2007, 07:14 PM #7
hey, I sent you an e-mail like 20 min ago or somethin. let me know, thanks
---Justin
-
04-02-2007, 07:47 PM #8
- Join Date
- Aug 2005
- Location
- cleveland ohio
- Posts
- 11,373
- iTrader
- 48 (100%)
trans am 00 ws6- 1998 camaro ss vert
you need to post prices for everything asap. thanks.
or i'll have to delete this.
-
04-03-2007, 04:37 PM #9
sent you an e-mail and attempted to call. some message like no longer available...sooo?????
-
04-10-2007, 10:19 PM #10
Parts and Prices Delay
I had a family emergency I had to tend to out of town. I am back at home now and can continue with emails and offers. I will also post prices asap on the items I have left to sell. Very sorry about the delay.
-
04-11-2007, 08:55 AM #11
- Join Date
- Apr 2006
- Location
- Pittsburgh, PA
- Posts
- 7
- iTrader
- 0
Red- 1989 IROC-Z
E-mail sent to you.
-
04-11-2007, 02:33 PM #12
Parts
I sent you an email regarding your request...Let me know what you think
-
04-12-2007, 07:50 AM #13
Bump for the day.
I still have everything except the idler pulley and some bolts. Need to get rid of this stuff guys so please take this stuff off my hands. All the parts are in great working condition and the clutch kit has not even 1k on the whole setup including the SLP flywheel. I have cleaned every part to look ALMOST as if they were new again. I take good care of my vehicles so be sure you will receive quality parts or your money back........
I will let it all go for $400 plus s/h, you can't beat that price guys, come on and take a good deal when its offered!!! LOL. I have pics if you want to see what you will be getting...Last edited by LS1Fever; 04-12-2007 at 07:55 AM. Reason: Added price....
-
04-20-2007, 03:11 PM #14
C'mon Guys....
I found my BRAND NEW set of Comp Cams heavy duty LS6 pushrods today in storage finally. Part #7955-16. They retail for $172 @ CompCams website so I will take an offer of $120+$5s/h. Here is a picture of them in the package and a close up of the part number and dimensions....
This closeup is not very good but you get the idea...
And I STILL have all the parts available except the idler pulley and some bolts. Since the items aren't selling as fast as I would like them too, I will ship for free. If there is ANYTHING you need let me know and I either have it here or can get it cheap. I have a pretty good hookup at the shop so lemme know!!
-
04-21-2007, 06:21 PM #15
Bump.....
Bump....
Nobody Interested!!!!!!
-
04-21-2007, 06:53 PM #16
- Join Date
- Aug 2005
- Location
- Broomfield CO
- Age
- 50
- Posts
- 44
- iTrader
- 0
red- 1995 Trans Am
I sent you a PM for a few things yesterday.
Lonnie
-
04-21-2007, 07:04 PM #17
- Join Date
- Aug 2005
- Location
- Broomfield CO
- Age
- 50
- Posts
- 44
- iTrader
- 0
red- 1995 Trans Am
Sorry I sent you an e-mail.
Lonnie
-
04-22-2007, 09:01 AM #18
Returned Email...
Email sent.........(Red95T/A)
-
04-22-2007, 11:16 AM #19
- Join Date
- Apr 2007
- Location
- Salt Lake City
- Posts
- 1
- iTrader
- 0
Silver- 2000 Camaro SS
Email sent
-
04-22-2007, 02:21 PM #20
- Join Date
- Apr 2007
- Location
- md
- Posts
- 9
- iTrader
- 0
red- 02 ws6
if your still selling how much for the stock intake stuff and do you have pictures?
Thanks,
Ben
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Stock parts from cam swap, and some auto parts
By Ryans99LS1 in forum Parts For Sale / TradeReplies: 2Last Post: 09-27-2009, 10:54 AM -
stock lt1 engine parts
By fastlt196 in forum Parts For Sale / TradeReplies: 0Last Post: 03-31-2009, 11:45 AM -
I Need Some Stock Engine Parts!!!!!!!!!!!!!!!!
By 98_BAT in forum Texas MembersReplies: 1Last Post: 07-27-2007, 04:42 PM -
WTB: stock rockers, stock pushrods and other parts
By jimmy 2 times in forum Parts Wanted / TradeReplies: 4Last Post: 10-31-2006, 12:20 PM -
in desperate need of stock engine parts, I have cash waiting
By WS666 in forum Parts Wanted / TradeReplies: 2Last Post: 03-16-2006, 01:55 PM
Bookmarks