SLP Y-Pipe: 2-1/2" 304 SS & SLP MAF

***35th-ANV-SS*** · 10-26-2009, 10:10 AM

I have a SLP Y-Pipe that I had on my car with my LM2. Upon getting my Kook's LTs and ORY this summer, I no longer need this.

Asking $140 + shipping. Paid $200 + shipping.

Disclaimer: The SLP Y-pipe I have does not have the installation hardware. The install kit includes (2) 3/8" bolts, (6) 3/8" washers, and (2) nuts. I am guessing you can pick these items up at Menards for somewhere in the ballpark of $5, if you don't already have them laying in a jar in your garage. It does come equipped with the band/c-clamp and hardware for it.

OEM Aluminum Drive Shaft that was taken off the car at 15,000 miles. Replaced with PST and larger yokes for 9". $100 + shipping.

85mm SLP MAF. Still like new. Paid $200, asking $150 + shipping.

I can provide pictures if need be. Send me a PM if interested.

**00Z28DC** · 10-26-2009, 10:44 AM

I'm interested in the y-pipe, could you send pics to pd_chung@yahoo.com, thanks!

***35th-ANV-SS*** · 10-26-2009, 03:11 PM

Originally Posted by 00Z28DC

I'm interested in the y-pipe, could you send pics to pd_chung@yahoo.com, thanks!

E-mail sent.

***1fastcamarosss11*** · 10-27-2009, 06:06 AM

please read the stickies. one thread for all parts for sale please.

***35th-ANV-SS*** · 10-27-2009, 09:29 AM

Originally Posted by 1fastcamarosss11

please read the stickies. one thread for all parts for sale please.

Sorry about that. I actually did read the sticky, but apparently I had a little too much alcohol in me at the time

Thanks for pointing it out and moving my other thread.

**karpetcm** · 10-27-2009, 08:28 PM

The ypipe will fit even though i have stock headers?

***35th-ANV-SS*** · 10-27-2009, 08:30 PM

Originally Posted by karpetcm

The ypipe will fit even though i have stock headers?

Y-Pipe fits stock manifolds. This is what I had on my car before I had my Kooks.

***35th-ANV-SS*** · 10-31-2009, 08:08 PM

**LS2GTO** · 11-01-2009, 08:17 AM

Also interested in y-pipe can you send pics?

***35th-ANV-SS*** · 11-01-2009, 10:39 AM

Originally Posted by LS2GTO

Also interested in y-pipe can you send pics?

What is your e-mail? Pics are large in file size.

**B4C Camaro** · 11-01-2009, 05:28 PM

PM sent

***35th-ANV-SS*** · 11-01-2009, 05:40 PM

Originally Posted by B4C Camaro

PM sent

E-mail sent with pics. Will estimate shipping tomorrow, but would guess $15-$20. SLP charges $40 for shipping.

**pewterzron** · 11-04-2009, 07:48 AM

I am in chicago. interested in your maf. Please call me at 312 388 5828. That way I dont have to pay for shipping

Thanks

Ron

***35th-ANV-SS*** · 11-13-2009, 02:09 PM

Y-Pipe is sold. Still have the SLP MAF and OEM DS.

***35th-ANV-SS*** · 12-09-2009, 04:02 PM

OEM AL Drive Shaft and SLP 85mm MAF still for sale.

OEM Aluminum DS had 12,000 miles on it when I got upgraded it along with new yoke for the new rear. $90 shipped

SLP MAF has approximately 5,000 miles on it. $140 shipped

**99SNAKESKINNER** · 12-26-2009, 05:34 AM

question do those y pipes make your exhaust louder i have slp lm and i was wonderin was there any hp gain if any , but just tryin to make my car sound a lil louder , thanks if you still got the maf hit me back ill take it bkurtz47@yahoo.com

***35th-ANV-SS*** · 12-26-2009, 10:14 AM

Originally Posted by 99SNAKESKINNER

question do those y pipes make your exhaust louder i have slp lm and i was wonderin was there any hp gain if any , but just tryin to make my car sound a lil louder , thanks if you still got the maf hit me back ill take it bkurtz47@yahoo.com

I still have the MAF, I will get some pics for you and e-mail you today.

I personally did not notice a difference as far as the car being louder with a y-pipe, even more so with my LM2.

If you have stock manifolds with a LM1, getting LTs will definitely make your car louder. If you already have LTs and you are still trying to make your car louder, the only thing I can suggest is getting e-cutouts. That would be the loudest things available.

***35th-ANV-SS*** · 12-27-2009, 05:51 AM

Here are the pictures of the SLP MAF.

***35th-ANV-SS*** · 12-27-2009, 06:02 AM

I still also have an OEM aluminum drive shaft

***35th-ANV-SS*** · 09-29-2011, 04:51 PM

Bump.

All prices include shipping in the 48 states.

Also have the following now:

- 28-lb injectors (taken out at 21,000 miles - $75)
- LS1 fans - $125
- OEM rear lower control arms - $25
- OEM torque arm - $50
- OEM springs & shocks - Make an offer
- OEM pan hard bar - $35
- stock Hurst shifter (no knob) - $50
- SLP Blackwing Lid (I need a pretty penny for this)
- K&N air filter - $30

If anything seems too high, MAKE AN OFFER!! Trust me, you won't offend me

Pics available upon request.