Results 1 to 20 of 46
-
01-01-2007, 02:23 PM #1
- Join Date
- Dec 2005
- Location
- San Diego...Michigan originally
- Age
- 41
- Posts
- 1,426
- iTrader
- 1 (100%)
Pewter- 1999 Trans Am 5.7L
Pushrods, Cam, Lifters, Hood For sale
I just did a cam swap in my 1999 T/A. I have the 2001-2002 engine in it, so the cam is slightly more aggressive than the stock cam for 1998-2000. I just want to get rid of it, as I have no further use for it. I am replacing the pushrods, and the lifters as well. Both out of the 2001-2002 engine. I have a regular hood as well...not ram air. Sorry. It's painted pewter, and doesnt come with any of the latch stuff on it. Like I said I really just want to get rid of the stuff.
All of these parts have less than 2K miles on them, so they are in just about as perfect of condition as you can get without buying new.
Cam.....SOLD
Pushrods...SOLD
Hood........$50
Lifters......SOLD
Or I will give you everything for $120. But like I said, I really just want to get rid of this crap, as I have no further use for it. I am in San Diego. Prefer not to ship. Feel free to contact me by responding to this thread or at jwindbigler@yahoo.com
ThanksLast edited by jwindbigler; 01-16-2007 at 01:49 PM.
-
01-01-2007, 02:31 PM #2
- Join Date
- Dec 2005
- Location
- San Diego...Michigan originally
- Age
- 41
- Posts
- 1,426
- iTrader
- 1 (100%)
Pewter- 1999 Trans Am 5.7L
I would be willing to trade for a pipe spreader, or something else. Heck I can always use more tools. Thanks
-
01-10-2007, 09:53 PM #3
- Join Date
- Dec 2005
- Location
- San Diego...Michigan originally
- Age
- 41
- Posts
- 1,426
- iTrader
- 1 (100%)
Pewter- 1999 Trans Am 5.7L
Anyone??
-
01-11-2007, 08:34 AM #4
will the cam, rods and lifters work on my 98 T/A ? i don't need the hood. my email is rbrtlux@aol.com if this stuff will work on mine i'd need it shipped cause i live in georgia - zip 30728. of course i'd pay the shipping too. so what price for cam,rods and lifters?
rob
-
01-12-2007, 02:03 PM #5
-
01-12-2007, 08:29 PM #6
my name and address is
rob lux
801 McLemore St.
LaFayette,Ga. 30728
when u find out total cost let me know where to send it. I prefer sending a money order and i'll send it express mail. i'm sure u will but make sure it's packaged good so the dang mailman don't ding the cam. oh, its quicker to get a hold of me at my aol email if u need to. the crank I just bought was shipped using DHL and they took care not to ding it. any Q,s just e me at rbrtlux@aol.com
-
01-13-2007, 09:57 AM #7
- Join Date
- Dec 2005
- Location
- San Diego...Michigan originally
- Age
- 41
- Posts
- 1,426
- iTrader
- 1 (100%)
Pewter- 1999 Trans Am 5.7L
Just sent you an email
-
01-13-2007, 10:19 AM #8
just the cheapest way to send it UPS is fine with me. i'm in no hurry. i'm still working on my lower end right now. I just got a crank from a guy in texas for $100.00 + $25.00 for shipping. and i just dropped it off at the machine shop to be inspected and polished. So it will be awhile before i need the cam and stuff from u. Let me know total cost and where to mail it and u can send it to me the cheapest way through UPS.
rob
-
01-13-2007, 11:34 AM #9
- Join Date
- Dec 2005
- Location
- San Diego...Michigan originally
- Age
- 41
- Posts
- 1,426
- iTrader
- 1 (100%)
Pewter- 1999 Trans Am 5.7L
Alright sounds good.
-
01-13-2007, 11:42 AM #10
- Join Date
- Dec 2005
- Location
- San Diego...Michigan originally
- Age
- 41
- Posts
- 1,426
- iTrader
- 1 (100%)
Pewter- 1999 Trans Am 5.7L
How about this, because I want to get rid of it. I can send it on monday. If you send me $160 I will send them to you. Sound good?? Let me know how you want to do the exchange. If you just want to do a wire transfer, or money order, I really dont care. This is my address. If you want to give me a call, PM me and I will send you my cell #
Justin Windbigler
3635 West Federal Blvd
San Diego, CA 92102
-
01-13-2007, 11:45 AM #11
thanx for your help man. one of my maint guys told me to get on this site and i should be able to find anything i am looking for. so far this site is great. i'm gonna try and send you a PM so i can give you my phone number. i'm not sure how to do this but i think i have to do it from your member profile and then i gotta go to friggen work. chat later
-
01-13-2007, 01:10 PM #12
- Join Date
- Dec 2005
- Location
- San Diego...Michigan originally
- Age
- 41
- Posts
- 1,426
- iTrader
- 1 (100%)
Pewter- 1999 Trans Am 5.7L
I just sent you a PM, sending you my #. Give me a call, and we can figure it out! Later
-
01-16-2007, 01:50 PM #13
- Join Date
- Dec 2005
- Location
- San Diego...Michigan originally
- Age
- 41
- Posts
- 1,426
- iTrader
- 1 (100%)
Pewter- 1999 Trans Am 5.7L
bump
-
01-16-2007, 03:44 PM #14
i guess i need to check this post more often and i would have seen you already gave me a price. i'll send the money order when i get into pittsburgh. and i'll send it express so u should get it by monday. it doesnt really matter to me who u use UPS or someone else. whatever is easier for u. just pack it good. i think i gave u my address but here ut us again.
rob lux
801 McLemore st.
LaFayette,Ga. 30728
423.413.9933
-
01-16-2007, 05:30 PM #15
- Join Date
- Dec 2005
- Location
- San Diego...Michigan originally
- Age
- 41
- Posts
- 1,426
- iTrader
- 1 (100%)
Pewter- 1999 Trans Am 5.7L
Thanks bud. What I will do for you is ship it out as soon as I can...spot you for shipping, and then give you a copy of the shipping reciept. I assume regular ground is OK with you right??
-
01-16-2007, 06:23 PM #16
regular ground is fine with me. if my employees aren't up A** tomorrow, i'll go to the post office on my lunch break and get the money order sent off.
-
01-17-2007, 12:59 AM #17
- Join Date
- Dec 2005
- Location
- San Diego...Michigan originally
- Age
- 41
- Posts
- 1,426
- iTrader
- 1 (100%)
Pewter- 1999 Trans Am 5.7L
Sweet, sounds good bud. I'll have my buddy ship the stuff off. I plan on shipping the lifters in the same box that mine from comp came in. Unfortunately I already tossed the package with the pushrods and the cam in it. So, I will just have to bubble wrap the crap out of the thing, and lable the box as fragile. Thats the last thing that I want to do is send you a bum part. Thanks again bud.
-
01-17-2007, 04:36 AM #18
works for me dude.
-
01-17-2007, 05:56 AM #19
- Join Date
- Dec 2005
- Location
- San Diego...Michigan originally
- Age
- 41
- Posts
- 1,426
- iTrader
- 1 (100%)
Pewter- 1999 Trans Am 5.7L
sweet
-
01-20-2007, 08:49 AM #20
- Join Date
- Dec 2005
- Location
- San Diego...Michigan originally
- Age
- 41
- Posts
- 1,426
- iTrader
- 1 (100%)
Pewter- 1999 Trans Am 5.7L
anyone for the hood??
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Wtb Stock Lifters, Pushrods, And Oil Pick-up Tube
By ks1998T/A in forum Parts Wanted / TradeReplies: 0Last Post: 01-23-2007, 06:03 PM -
Sub box w/ JL subs, amp, 7.3" pushrods, Morel lifters - Pasadena/Woodland Hills, CA
By Jon F in forum Parts For Sale / TradeReplies: 5Last Post: 11-03-2006, 10:06 PM -
Sub box w/ JL subs, amp, 7.3" pushrods, Morel lifters - Pasadena/Woodland Hills
By Jon F in forum Western MembersReplies: 1Last Post: 11-03-2006, 09:00 AM -
224 .588 114LSA Cam, 918 Springs, and 7.4 Pushrods for sale
By JoshkerLS1 in forum Parts For Sale / TradeReplies: 4Last Post: 05-27-2006, 05:13 PM -
Comp Cam 7.4 Pushrods for sale/trade
By John Junkins in forum Parts For Sale / TradeReplies: 0Last Post: 02-04-2006, 09:16 AM
Bookmarks