Results 1 to 2 of 2
-
02-14-2007, 09:51 AM #1
- Join Date
- Nov 2006
- Location
- Dunedin
- Posts
- 4
- iTrader
- 0
PORTED LS1 Heads/Comp Custom Grind Cam Made 450WHP 404WTQ FS
PORTED LS1 Heads/Comp Custom Grind Cam Made 450WHP 404WTQ
99-00 #853
Casting Number 853 or 241
LS1 (Center Bolt)
99-00 5.7L Passenger Car and Corvette (853)
01+ 5.7L Passenger Car and Corvette (241)
Material: Aluminum
Combustion Chamber Volume: 66.67cc
Intake Port Volume: 200cc
Exhaust Port Volume: 70cc
Intake Valve Diameter: 2.00 inches
Exhaust Valve Diameter: 1.55 inches
Fresh from the machine shop w/ new valve seals.
921 comp valve springs(Properly seated w/ equal spring pressure)
Ferroa 2.02 aftermarket intake valves
Milled to give 11.7:1 compression. (W/ good tune run excellent on pump gas)(Was previously tuned by Jeremy Formato on original owners daily driver 01 TA)
Custom Grind Comp Cam #C7942
236/230 114LSA+2 601/591Lift
(Comes w/ Comp Cams Cam card printout)
2-3K miles on cam.
Bought to install on my 98 LS1, decided to go another route (FI).
Install info from original owners car.
http://www.ls1tech.com/forums/showthread.php?t=221398
Dyno Sheet
http://www.ls1tech.com/forums/attach...chmentid=15130
Info on company who did the install
http://www.pm-fl.com/catalog/results...463fe3437de1d4
Click "Camaro/Firebird 1998-2002 LS and look for
"Ryan's 2001 Firebird 6-Speed -- 450 RWHP / 404 RWTQ
Precision Motorsports Stage 3 Ported, Polished, and Coated LS1 Heads
Stock 346 CID engine
236/230 Cam
Long Tube Headers
Muffler, Lid, and Pulleys "
This was when they were on the original owners vehicle. Since then the heads have been gone through and checked, and double checked. Additional
portwork done, to finish the smoothing of the runners, pocket ported, and the valve pocket has been ported to match the enlarged Ferroa valves.
Pics will be up ASAP, will include Cam Sheet, and my receipt for the headwork, as well as heads/cam.
I am only asking for the money I have in these heads/Cam. Not in a hurry to sell.
$1800.
PM/EMAIL/REPLY for more info.
Located in Central Florida.
Buyer pays shipping.
Thanks for looking,
John.
-
02-14-2007, 03:26 PM #2
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Custom Grind Comp Cam
By jmhvenom in forum Parts For Sale / TradeReplies: 11Last Post: 03-15-2010, 05:13 PM -
PORTED LS1 Heads/Comp Custom Grind Cam Made 450WHP 404WTQ FS
By EliteZ in forum Parts For Sale / TradeReplies: 7Last Post: 03-23-2007, 09:55 AM -
Fs - Comp Custom Grind Cam
By mph1972 in forum Parts For Sale / TradeReplies: 2Last Post: 11-30-2006, 04:30 PM -
Ported 4.8 Heads & Comp R Lifters
By Fubarredz in forum Parts For Sale / TradeReplies: 2Last Post: 05-25-2006, 12:09 PM -
Ported 4.8 Heads & Comp R Lifters
By Fubarredz in forum Texas MembersReplies: 1Last Post: 09-02-2005, 08:07 PM
Bookmarks