Page 1 of 2 12 LastLast
Results 1 to 20 of 21

Patriot heads, TSP cam, Comp lifters, Pacesetter long tubes

This is a discussion on Patriot heads, TSP cam, Comp lifters, Pacesetter long tubes within the Parts For Sale / Trade forums, part of the Sponsors Group Pricing and Parts Review category; well, here i go! changing the combination that ran just fine. going to supercharger, so out goes the n/a setup. ...

  1. #1
    stab it and steer it!
    Join Date
    Aug 2006
    Location
    illinois
    Age
    46
    Posts
    75
    iTrader
    0

    red
    99 Z28 SS convertible

    Arrow Patriot heads, TSP cam, Comp lifters, Pacesetter long tubes

    well, here i go! changing the combination that ran just fine. going to supercharger, so out goes the n/a setup. I have the Patriot cnc heads complete, TSP hyd. roller w/ Comp Cams lifters, coated Pacesetter long tubes with a custom ORY. all gotta go!
    99ss 'vert ran 11.50's n/a with a TCI 400 stall, 3.23 gears, speed inc tune. obviously theres other stuff to do that, but this is the heart of the combo.

    Patriot heads complete 700.00
    TSP cam, Comp lifters 275.00
    Pacesetter's and ORY 375.00

    if interested, i can get some pics taken and email.

    pm back for info

  2. #2
    Junior Member
    Join Date
    Mar 2007
    Location
    NC
    Posts
    9
    iTrader
    0

    Silver
    1998 Z28 Camaro

    What condition are the headers and ory in? Any dents, leaks, etc? Send pics to saclay77@yahoo.com Thanks
    Last edited by underated98z; 03-06-2007 at 11:11 PM.
    98 Z28 Camaro: FRA, Flowmaster muffler, K&N, Cutout, and 4.10's
    1/8 mile: 8.24 @ 86mph on street tires
    1/4 mile: 12.78 @ 110mph

  3. #3
    Veteran 0rion's Avatar
    Join Date
    Aug 2005
    Location
    ohio
    Posts
    22,519
    iTrader
    7 (100%)

    98 Formula
    06 duramax

    How many miles on the heads/cam?
    Are the heads milled?
    What springs?
    What's the specs on the cam and do you have the cam card?

  4. #4
    Junior Member
    Join Date
    Jan 2007
    Location
    305
    Posts
    6
    iTrader
    0
    interested in the headers and ory. pics of headers and y to twyss001@yahoo.com ?

  5. #5
    member
    Join Date
    Aug 2005
    Location
    Clifton Hts.,Pa.
    Age
    61
    Posts
    62
    iTrader
    0

    Black
    2001 Camaro SS

    All info on whole package to Tom01SS@aol.com

  6. #6
    Junior Member Steve L's Avatar
    Join Date
    Feb 2007
    Location
    Arizona
    Posts
    68
    iTrader
    0

    Silver
    1998 Trans Am

    PM sent; definitely interested in the whole package!!

  7. #7
    stab it and steer it!
    Join Date
    Aug 2006
    Location
    illinois
    Age
    46
    Posts
    75
    iTrader
    0

    red
    99 Z28 SS convertible

    this setup was on my car when i bought it. i know the owner. he only put about 6-7000 miles on it, then i put 1200 on it. the springs are the standard beehive type springs that come on the patriot's, should be good to 600 lift. the heads have not been off since new, so they should still have the factory surface. there was no evidence of leakage anywhere. GM mls gaskets were used. i believe the cam is the tsp special grind 585. im not sure of this. i have sent a email to the owner to see if he can send a fax of the cam card. if not i will call tsp to see what it is.

  8. #8
    Junior Member
    Join Date
    Jan 2007
    Location
    Guadalajara Mexico
    Posts
    15
    iTrader
    0

    Red
    Z28 M6 1998

    I would take the heads an the cam just send me the pictures to chuytec@hotmail.com paypal ready thank you

  9. #9
    stab it and steer it!
    Join Date
    Aug 2006
    Location
    illinois
    Age
    46
    Posts
    75
    iTrader
    0

    red
    99 Z28 SS convertible

    all the parts except the headers and ory are at the engine shop. they were supposed to disassemble the engine and do cleanup/inspection. i'll have to go there to get pics of those. i should be able to post them by friday.

    the Pacesetters are the 1-3/4's and have the emissions block-offs.

    i did contact the original owner about the cam. he says it is a Comp Cams special grind from Speed Inc. it's the S12 cam, 224 duration and 581 lift on int and exh, 112 lsa

  10. #10
    Junior Member Steve L's Avatar
    Join Date
    Feb 2007
    Location
    Arizona
    Posts
    68
    iTrader
    0

    Silver
    1998 Trans Am

    E-mail sent. Can you give specifics on the heads...Patriot Stage _ ? Valve size? Flow #'s? VERY interested in the entire package.

  11. #11
    stab it and steer it!
    Join Date
    Aug 2006
    Location
    illinois
    Age
    46
    Posts
    75
    iTrader
    0

    red
    99 Z28 SS convertible

    bummer... I went to the engine shop today to get my parts and got bad news from them. the #1 intake runner has a small crack in the short side floor. you couldn't even see the crack, but I'm not the type of person to sell junk, so the deals off. sorry to you guys that were interested. this was caused by Patriot porting the runners too thin. I'm trading the heads/cam and some cash to the shop for a new set of Dart's and a custom Cam Motion grind.

    however, the Pacesetters and ory are still available. I also have a ASP balancer that may be available, as soon as i figure out if the pulley works or not. I will post it up later if it becomes a for sale item.

    i also still have the Comp hyd. roller lifters available. not sure what they're worth, but i'd say 100.00 takes them

  12. #12
    Moderator Firebirdjones's Avatar
    Join Date
    May 2006
    Location
    Arizona
    Posts
    12,552
    iTrader
    0
    Let me know on the ASP pulley, I am very interested when you get the chance. Larry.

  13. #13
    Junior Member
    Join Date
    Jan 2007
    Location
    Guadalajara Mexico
    Posts
    15
    iTrader
    0

    Red
    Z28 M6 1998

    maybe i can take the cam an the roller lifters just send me a picture of them an what size also thank you

  14. #14
    Junior Member
    Join Date
    Jan 2006
    Location
    Hamilton
    Posts
    28
    iTrader
    0
    You're a good man. I think we all appreciate your honesty.

  15. #15
    Member homerunhtr21's Avatar
    Join Date
    Jan 2007
    Location
    Bama
    Posts
    375
    iTrader
    2 (100%)

    Artic White
    2002 Z28

    headers

    pics of headers to homerunhtr21@aol.com

  16. #16
    stab it and steer it!
    Join Date
    Aug 2006
    Location
    illinois
    Age
    46
    Posts
    75
    iTrader
    0

    red
    99 Z28 SS convertible

    Quote Originally Posted by homerunhtr21 View Post
    pics of headers to homerunhtr21@aol.com

    pics sent. thanks


    the camshaft went with the heads.. as the engine shop wanted it. i believe they are gonna try to repair the head and sell it to another one of their customers.

    the roller lifters are still available.

    thanks

  17. #17
    Moderator Firebirdjones's Avatar
    Join Date
    May 2006
    Location
    Arizona
    Posts
    12,552
    iTrader
    0
    Any word on the ASP pulley yet?

  18. #18
    stab it and steer it!
    Join Date
    Aug 2006
    Location
    illinois
    Age
    46
    Posts
    75
    iTrader
    0

    red
    99 Z28 SS convertible

    Quote Originally Posted by Firebirdjones View Post
    Any word on the ASP pulley yet?
    not as of yet. i just recieved the procharger setup friday afternoon. i will know more monday or tuesday.

  19. #19
    Moderator Firebirdjones's Avatar
    Join Date
    May 2006
    Location
    Arizona
    Posts
    12,552
    iTrader
    0
    Cool thanks, just say the word. Larry.

  20. #20
    Junior Member
    Join Date
    May 2007
    Location
    Miami,FL
    Posts
    7
    iTrader
    0
    How much just for the headers?? shippin to 33178?>

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. pacesetter long tubes
    By JunkyardZ in forum External Engine
    Replies: 5
    Last Post: 01-31-2010, 07:38 PM
  2. pacesetter long tubes & y pipe
    By johnny_b in forum External Engine
    Replies: 24
    Last Post: 08-29-2007, 07:39 PM
  3. SLP y-pipe+pacesetter long tubes?
    By NE98LS1 in forum External Engine
    Replies: 3
    Last Post: 12-28-2005, 09:35 PM
  4. Pacesetter Long Tubes for '00 SS
    By SSwt00SS in forum Camaro / SS
    Replies: 0
    Last Post: 12-28-2005, 12:25 PM
  5. Ported 4.8 Heads & Comp R Lifters
    By Fubarredz in forum Texas Members
    Replies: 1
    Last Post: 09-02-2005, 09:07 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •