Page 1 of 2 12 LastLast
Results 1 to 20 of 22

Parts Parts Parts!

This is a discussion on Parts Parts Parts! within the Parts For Sale / Trade forums, part of the Sponsors Group Pricing and Parts Review category; Custom made box and two 12" Rockford fosgate subs, in working order, had been using these in my yukon since ...

  1. #1
    Member
    Join Date
    Nov 2005
    Location
    Bonner Springs, KS
    Age
    33
    Posts
    402
    iTrader
    0

    NBM
    99 TA

    Sub box with subs and misc. Parts!

    Custom made box and two 12" Rockford fosgate subs, in working order, had been using these in my yukon since I switched to a stealth box, but now have a truck and these won't fit. I will consider mailing if buyer is interested, but it will probably cost a bit due to weight. ($150 pick-up)
    Dimensions of the box are 38" x 16 1/4" x 8 1/4"


    upper radiator support and airbox/ lid and baffles (SOLD)

    Stock MAF (SOLD)

    NBM t/a hood with struts and latches. Paint is in good condition, no chips. ($200)


    Right turn signal housing (Sold)

    Stock Torque Arm ($15 pick up, $48 shipped)


    Stock Front calipers/brake pad bracket, brake hoses, retainer clips, ceramic pads. (SOLD)

    Stock rotors ($50 shipped)


    Driver's side mirror with motor, brand new, unpainted...brand new, never used ($80 shipped)


    LS1 camshaft ($45)


    853 heads/springs ($60 pick up or $95 shipped)


    LS1 pushrods ($20 shipped)
    LS1 chain ($20 shipped)


    LS1 oil pump ($30 shipped)


    LS1 valley cover/gasket and bolts (SOLD)

    Subthump box for 2 10" BOX ONLY (SOLD)

    LS1 stock thermostat, no issues, removed for lower temp thermostat (SOLD)

    One Bosch 13111 O2 sensor, brand new, in box. (SOLD)

    SLP LS6 intake manifold with EGR provision and INCLUDES MAP sensor (SLP P/N: 30041) I am also including mounting bolts for the intake, which did NOT come with the kit from SLP. Does NOT include LS6 coolant lines. (SOLD)

    LS1 intake with coolant lines. (SOLD)

    Stock LS1 throttle body ($75 shipped)


    Prices are negotiable, feel free to pm me with offers.
    Last edited by peterlawl84; 07-01-2010 at 08:13 AM.

  2. #2
    Member
    Join Date
    Nov 2005
    Location
    Bonner Springs, KS
    Age
    33
    Posts
    402
    iTrader
    0

    NBM
    99 TA

    SLP LS6 intake manifold with EGR provision and INCLUDES MAP sensor (SLP P/N: 30041) I am also including mounting bolts for the intake, which did NOT come with the kit from SLP. Does NOT include LS6 coolant lines. (SOLD)
    Last edited by peterlawl84; 06-18-2010 at 05:07 PM.

  3. #3
    Junior Member
    Join Date
    Jun 2010
    Location
    San Antonio
    Posts
    1
    iTrader
    0

    Silver
    2000 Trans Am Ws6

    interested in those mirrors. i have silver ws6 black rimms. those r black right?

  4. #4
    Member
    Join Date
    Nov 2005
    Location
    Bonner Springs, KS
    Age
    33
    Posts
    402
    iTrader
    0

    NBM
    99 TA

    Quote Originally Posted by Silver 3ullet View Post
    interested in those mirrors. i have silver ws6 black rimms. those r black right?
    I only have the driver's side mirror. It is unpainted from the dealership, it is black plastic.

  5. #5
    Junior Member
    Join Date
    May 2010
    Location
    Ohio
    Posts
    35
    iTrader
    0

    Black
    2000 T/A WS6

    i might be interested in the intake if you still have it

  6. #6
    Member
    Join Date
    Nov 2005
    Location
    Bonner Springs, KS
    Age
    33
    Posts
    402
    iTrader
    0

    NBM
    99 TA

    Intake is still available, I have had several potential buyers, but they fail to come up with the payment.
    Here are a couple close up pics of the EGR.


  7. #7
    Member
    Join Date
    Aug 2009
    Location
    Virginia Beach, Virginia
    Posts
    145
    iTrader
    0

    Black
    2000 Pontiac Trans Am WS6

    I am curious about the the EGR hook up, do you have directions for it or is it self-explanatory? Do you take PayPal? Any idea what the coolant lines go for?Thanks.

    Scott

  8. #8
    Member
    Join Date
    Nov 2005
    Location
    Bonner Springs, KS
    Age
    33
    Posts
    402
    iTrader
    0

    NBM
    99 TA

    Quote Originally Posted by NavyTATwo View Post
    I am curious about the the EGR hook up, do you have directions for it or is it self-explanatory? Do you take PayPal? Any idea what the coolant lines go for?Thanks.

    Scott
    I did not do the initial install of the intake...had a shop do it, so I do not have the directions anymore. Y ou might have to trim the end of the stock EGR tube, I am sure you can get install directions from SLP too, but the shop said it was a pretty simple install. But when I removed the EGR, it seemed pretty self-explanatory...that brass nut (with the aluminum piece in the pic) slides over the stock EGR tube and then tighten it down. The aluminum block off plate pops out of the brass piece, I just used that as a block off rather than buying a new capped piece.

    The LS6 coolant lines...I have seen for around $50 last I checked (but not absolutely sure), but many have used the LS1 lines with the LS6 intake, just need to remove the ribs on the bottom of the intake.

    And I prefer paypal and can get the intake shipped the day of or following day that I receive payment. Price includes paypal fees and insurance.

  9. #9
    Member
    Join Date
    Nov 2005
    Location
    Bonner Springs, KS
    Age
    33
    Posts
    402
    iTrader
    0

    NBM
    99 TA

    Guys, I am not interested in low ball offers. I am not scrapped for cash so I am not going to accept a low offer just because it was made. If you are going to make an offer, make it reasonable.
    Thanks

  10. #10
    Member
    Join Date
    Nov 2005
    Location
    Bonner Springs, KS
    Age
    33
    Posts
    402
    iTrader
    0

    NBM
    99 TA

    SLP LS6 intake sold.

  11. #11
    Member
    Join Date
    Nov 2005
    Location
    Bonner Springs, KS
    Age
    33
    Posts
    402
    iTrader
    0

    NBM
    99 TA

    VC pending.

  12. #12
    Member
    Join Date
    Nov 2005
    Location
    Bonner Springs, KS
    Age
    33
    Posts
    402
    iTrader
    0

    NBM
    99 TA

    valley cover sold.

  13. #13
    Member
    Join Date
    Nov 2005
    Location
    Bonner Springs, KS
    Age
    33
    Posts
    402
    iTrader
    0

    NBM
    99 TA

    calipers sold

  14. #14
    Junior Member
    Join Date
    Jun 2010
    Location
    Ohio
    Posts
    15
    iTrader
    0
    2006 Pacifica

    Just to be sure, that is a stock hood, not Ram Air, etc. and would fit just fine on a 99 Base model.

  15. #15
    Spaz is My Mentor SMWS6TA's Avatar
    Join Date
    Feb 2009
    Location
    Ugy Lower Corner of AL
    Posts
    10,511
    iTrader
    2 (100%)

    Navy Blue Metallic
    98 T/A w/a little mods...

    Quote Originally Posted by BlairF View Post
    Just to be sure, that is a stock hood, not Ram Air, etc. and would fit just fine on a 99 Base model.
    Yes the pic is a stock hood and would fit

  16. #16
    Member
    Join Date
    Nov 2005
    Location
    Bonner Springs, KS
    Age
    33
    Posts
    402
    iTrader
    0

    NBM
    99 TA

    yep, stock, non-ram air hood. It would fit the v-6 as well.

  17. #17
    Member
    Join Date
    Nov 2005
    Location
    Bonner Springs, KS
    Age
    33
    Posts
    402
    iTrader
    0

    NBM
    99 TA

    turn signal housing pending.

  18. #18
    Member
    Join Date
    Nov 2005
    Location
    Bonner Springs, KS
    Age
    33
    Posts
    402
    iTrader
    0

    NBM
    99 TA

    Turn signal housing sold.

  19. #19
    Member
    Join Date
    Nov 2005
    Location
    Bonner Springs, KS
    Age
    33
    Posts
    402
    iTrader
    0

    NBM
    99 TA

    sub box with 2 fosgate 12" subs added.

  20. #20
    Junior Member
    Join Date
    Jun 2010
    Location
    Ohio
    Posts
    15
    iTrader
    0
    2006 Pacifica

    any idea how much shipping on the hood would be to 43054?

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. November 2011 Chevy High Performance Parts - Parts Rack
    By Ed Blown Vert in forum Camaro / SS
    Replies: 0
    Last Post: 09-15-2011, 10:10 AM
  2. Replies: 0
    Last Post: 02-13-2007, 11:10 PM
  3. PARTS PARTS PARTS...tires, LCAs, relocation brackets, etc.
    By BackinBlack02SS in forum Parts For Sale / Trade
    Replies: 4
    Last Post: 02-28-2006, 04:41 PM
  4. PARTS PARTS PARTS...tires, wheels, sway bar, G-Tech, etc.
    By BackinBlack02SS in forum Parts For Sale / Trade
    Replies: 22
    Last Post: 01-29-2006, 02:36 PM
  5. FOR SALE: T-top conversion Hugger ORANGE parts, ebony interor parts!
    By camaros4ever in forum Parts For Sale / Trade
    Replies: 7
    Last Post: 11-21-2005, 01:17 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •