Results 1 to 20 of 21
Thread: Parts
-
07-24-2010, 08:49 PM #1
- Join Date
- Apr 2010
- Location
- Savannah, GA
- Age
- 40
- Posts
- 298
- iTrader
- 2 (100%)
Red- 2000 Camaro SS
Parts
I'm trying to de-clutter my garage and get rid of some stuff sitting on or in my tool box. The wheels are on the car but I have another set so I can pull them off if anyone is interested.
Y2K Silver 10 Spokes w/ Fuzion 275/40ZR17SOLD
All the wheels have some rash around the lips. I marked the spots where there is rash with orange lines. I can get better pics if anyone is interested. All tires have 6-7 32nd's.
$200 OBO + shippingSOLD
Delco Head Unit and 12 Disk CD Changer (00' Camaro)
The Head unit was taken out of the car last October before I deployed and worked fine when I took it out. It's missing the tuning knob.
$40 + Shipping
The disk changer powers on but I can't get the CD tray to come out.
$5 + Shipping
Head unit and CD player ('97 Silverado)
Head unit worked great but CD player kept reading error. Head unit is missing the tuning knob.
$10 + Shipping for both
HVAC Controls (2000 Camaro)
Bought them to trouble shoot the backlights on mine that weren't working. Ended up changing the bulbs in mine. Don't know anything else about either of them. One has the wiring pigtails with the wires cut. The other has no wiring.
$5/ea +shipping
Hot Cam(copy), Yellow Valve Springs, Steel Retainers and locksSOLD
None have been installed. I bought the cam off of ebay and changed my mind about my setup. It is a copy of the hotcam and has the "cam card" that was mailed with it. The cam has some surface rust from sitting that looks like it would polish off.
$100 + Shipping for all of it.SOLD
2000 Stock Throttle Body
Took it off for a port and polished one.
$30 + ShippingLast edited by IH8EVRY1; 08-17-2010 at 02:25 PM.
-
07-26-2010, 03:37 PM #2
- Join Date
- Jun 2010
- Location
- iowa
- Posts
- 4
- iTrader
- 0
red- 2001 camaro z28
hey i was woundering if i could c a pic of ur whole car with those wheels/ im interested in them.
-
07-26-2010, 03:55 PM #3
- Join Date
- Apr 2010
- Location
- Savannah, GA
- Age
- 40
- Posts
- 298
- iTrader
- 2 (100%)
Red- 2000 Camaro SS
http://www.ls1.com/forums/showthread.php?t=135752
That link is the one to my car in the member's section. The first couple are with the ZR1's but after that all of them are with these wheels. There is some rash on them(check the close ups) but 20 feet away they still look pretty good to me. I just want 11 inch wide wheels so I can run wider tires. Thanks for looking.
-
07-26-2010, 06:28 PM #4
- Join Date
- Jun 2010
- Location
- iowa
- Posts
- 4
- iTrader
- 0
red- 2001 camaro z28
hey could u pm me a price on shipping 2 50220? if its reasonable i mite buy them
-
07-27-2010, 02:36 PM #5
- Join Date
- Apr 2010
- Location
- Savannah, GA
- Age
- 40
- Posts
- 298
- iTrader
- 2 (100%)
Red- 2000 Camaro SS
You can't receive PM's. That option is not available on your page. Shoot me an email from my page or try sending me a PM and see if I can send one back. I got the quote but couldn't figure out how to send you a PM via my blackberry. I guess it wasn't my blackberry. Shoot me a message.
-
07-27-2010, 05:20 PM #6
- Join Date
- Jun 2010
- Location
- iowa
- Posts
- 4
- iTrader
- 0
red- 2001 camaro z28
sent u an email hope that workd.
-
07-27-2010, 05:42 PM #7
-
07-28-2010, 09:45 AM #8
- Join Date
- Apr 2010
- Location
- Savannah, GA
- Age
- 40
- Posts
- 298
- iTrader
- 2 (100%)
Red- 2000 Camaro SS
Pending sale on the wheels
-
07-29-2010, 08:33 PM #9
whats up with the cam
-
07-30-2010, 02:27 AM #10
- Join Date
- Apr 2010
- Location
- Savannah, GA
- Age
- 40
- Posts
- 298
- iTrader
- 2 (100%)
Red- 2000 Camaro SS
It's a HotCam copy. I never installed it because I changed my mind. It's just not enough for what I want. You can read about a copied cam but basically someone takes a new cam and a used cam. The used one is the reground to match the profile of the new one. It's done similar to having a key made I guess. Anyway, the specs are on the index card that was sent with it. There is some surface rust on the journals. I didn't see any on the lobes. I do think it would polish off.
I was going to sell it, springs, retainers and locks all as a package but if someone if looking for me to seperate them, I would, just shoot me a pm.
Thanks for looking.
-
08-04-2010, 05:44 PM #11
- Join Date
- Apr 2010
- Location
- Savannah, GA
- Age
- 40
- Posts
- 298
- iTrader
- 2 (100%)
Red- 2000 Camaro SS
TTT with some additions
Got some additions.
2 x Stock Air Lids with baffles. 1 is from a 2000 SS the other from a 2002 SS. The 2002 model still has the sensor and is the bottom picture. $25 w/o the sensor & $30 w/ the sensor + shippingSOLD(WITH SENSOR)
1 x Stock Air Lid Bellow - $5 + shipping SOLD
2000 Camaro Turn Signal>Marker Light Housing L&R - $20+shipping
Last edited by IH8EVRY1; 08-17-2010 at 02:26 PM.
-
08-05-2010, 02:57 PM #12
- Join Date
- Apr 2010
- Location
- Savannah, GA
- Age
- 40
- Posts
- 298
- iTrader
- 2 (100%)
Red- 2000 Camaro SS
More Additions
2000 Camaro SS Stock Pan Hard Bar and Lower Control Arms - Taken off at 100,000 Miles
50 + Shipping for the lot but I would separate if anyone is interested...just PM me
-
08-05-2010, 07:27 PM #13
How much for the wheels in the first pictures of your car, the chrome ones?
It doesn't matter if you win by an inch, or a mile. Winning is winning
-
08-05-2010, 09:03 PM #14
- Join Date
- Nov 2007
- Location
- Ft. Rucker Area, Lower AL
- Posts
- 674
- iTrader
- 0
Arctic White- 01 TA / 06 Duc 749D
This is probably a dumb question but what is the max lift for those Yellow springs?
-
08-05-2010, 10:51 PM #15
- Join Date
- Apr 2010
- Location
- Savannah, GA
- Age
- 40
- Posts
- 298
- iTrader
- 2 (100%)
Red- 2000 Camaro SS
Nope, not a dumb question.
Here are the specs:
Beehive Valve Springs, 90 lbs. @ 1.8 in., 295 lbs @ 1.250 in., .570 in. Maximum Lift, LS6/LS2, Set of 16
-
08-10-2010, 08:13 PM #16
- Join Date
- Nov 2007
- Location
- Albuquerque, New Mexico
- Posts
- 4
- iTrader
- 0
Copper- 1978 El Camino
Interested in springs, retainers and locks shipped to 87108 (Albuquerque, NM)
-
08-11-2010, 05:40 AM #17
- Join Date
- Apr 2010
- Location
- Savannah, GA
- Age
- 40
- Posts
- 298
- iTrader
- 2 (100%)
Red- 2000 Camaro SS
Bilster, PM sent. Thanks
-
08-11-2010, 10:18 PM #18
did the wheels ever sell ? If not how much to ship to 85707?
-
08-12-2010, 05:46 AM #19
-
08-14-2010, 10:26 AM #20
- Join Date
- Aug 2010
- Location
- Upstate NY
- Posts
- 12
- iTrader
- 0
Black- 1999 Trans Am
willing to separate wheels from tires? Willing to pay shipping, but i only need the 4 tires.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
November 2011 Chevy High Performance Parts - Parts Rack
By Ed Blown Vert in forum Camaro / SSReplies: 0Last Post: 09-15-2011, 09:10 AM -
Late Model Pontiac Performance Parts - SEMA Show - 2007 New Parts Tech Guide
By Ed Blown Vert in forum Firebird / WS6Replies: 0Last Post: 02-13-2007, 10:10 PM -
PARTS PARTS PARTS...tires, LCAs, relocation brackets, etc.
By BackinBlack02SS in forum Parts For Sale / TradeReplies: 4Last Post: 02-28-2006, 03:41 PM -
PARTS PARTS PARTS...tires, wheels, sway bar, G-Tech, etc.
By BackinBlack02SS in forum Parts For Sale / TradeReplies: 22Last Post: 01-29-2006, 01:36 PM -
FOR SALE: T-top conversion Hugger ORANGE parts, ebony interor parts!
By camaros4ever in forum Parts For Sale / TradeReplies: 7Last Post: 11-21-2005, 12:17 PM
Bookmarks