Results 1 to 11 of 11
-
01-24-2010, 06:59 PM #1
- Join Date
- Sep 2006
- Location
- Philadelphia
- Age
- 40
- Posts
- 207
- iTrader
- 1 (100%)
Smokey Gray Metallic- 1991 Nissan 240sx LS6
Lots of stuff, Spec 2+, Fidanza, Hypertech, OEM
outtowinpahc@aol.com
All items would ship via fedex only from Philadelphia PA. Prices are firm.
OEM Parts
LS1 ERG style intake
$25.00 local / $40.00 Shipped
LS1 F-Body headers
$25.00 / $50.00 Shipped
LS1 Corvette Headers (missing a stud on one)
$25.00 / $50.00 Shipped
LS1 T56 F-Body trans crossmember $50 local / $60.00 Shipped
Used Hypertech Hyperpac, $100.00 local / $110.00 Shipped
it is locked to my vin, can be sent in for unlock which is a return they will send you a new one. Unit comes with the cable, base mount and screws. It does have a small scratch on the screen that you can only see when its off. Sells for $500 new, unlocking is $220.00
PN 83006
SN 1214710
Rev 14.00.03.015
http://www.ws6project.com/user_stor/...216d3a24b9644c
Stock Photo
And mounted in my LS 240sx
Used Fidanza Aluminum flywheel with brand new disk, and Spec 2+ clutch (1000 miles on both)
$450 local / $490 Shipped OR TRADE
I got these with my F-Body swap over kit and do not need them. I am using a Spec 3 clutch and billet steel flywheel. (Sponsored by Spec)
The clutch and flywheels is said to have 1000 miles or less on it. It came from a swap over I got from LSX power and development. I was going to use the flywheel, and I replaced the friction disk with a brand new one. So the flywheel is essentially brand new. The old disk had some heat marking but it wasn't that bad. The pressure plate is nice and smooth, minimal heat coloring.
The flywheel is $400 new, this one has a brand new disk and is as close to new as you can get.
The clutch kit is $449 new
I am looking to trade it. I will trade both for an Fast 90mm or equivilant intake. I am also in the market for fuel rails, aeroforce scan gauges, wideband gauge and sensor, stock un-exploded engines/longblocks.
Last edited by OutToWinPAHC; 01-24-2010 at 08:02 PM.
-
01-24-2010, 08:02 PM #2
- Join Date
- Sep 2006
- Location
- Philadelphia
- Age
- 40
- Posts
- 207
- iTrader
- 1 (100%)
Smokey Gray Metallic- 1991 Nissan 240sx LS6
Custom TH350 kickdown bracket and cable for the TH350.
I am looking for 35 local / 45 shipped. Bolts right to the intake manifold, you will need to flip the cruise cable peg on the TB to make it work (face it backwards).
Hughes LS1 to 7004r/TH350/TH400/2004R/Powerglide crank adapter.
I used a TCI conversion flexplate so I did not need this, but it is brand new and works with stock LS type flexpates. $30.00 shipped
-
01-25-2010, 12:10 AM #3
- Join Date
- Jan 2010
- Location
- maryland
- Posts
- 10
- iTrader
- 0
white- 1994 camaro
i have a 2005 6.0 L with 317 alum heads chevy truck motor would that intake work for me....
-
01-25-2010, 02:30 AM #4
- Join Date
- Sep 2006
- Location
- Philadelphia
- Age
- 40
- Posts
- 207
- iTrader
- 1 (100%)
Smokey Gray Metallic- 1991 Nissan 240sx LS6
It will fit the 317 heads fine, but you will need an EGR block off
-
01-26-2010, 05:22 PM #5
- Join Date
- Sep 2006
- Location
- Philadelphia
- Age
- 40
- Posts
- 207
- iTrader
- 1 (100%)
Smokey Gray Metallic- 1991 Nissan 240sx LS6
Items still available, trade pending for the clutch / flywheel
-
01-26-2010, 07:12 PM #6
- Join Date
- Jul 2006
- Location
- Greene, Iowa
- Age
- 38
- Posts
- 1,707
- iTrader
- 3 (100%)
Red- 99 Chevrolet Camaro Z-28
im a lil confused on the hyper pac.. i take it, i would give you 110 shipped, then have to send it in and pay another 220 on top of that for a clean/useable/unlocked hyperpac??
-
01-27-2010, 03:09 AM #7
- Join Date
- Sep 2006
- Location
- Philadelphia
- Age
- 40
- Posts
- 207
- iTrader
- 1 (100%)
Smokey Gray Metallic- 1991 Nissan 240sx LS6
Yeah, they are 500 new plus shipping. Mine is locked to my vin. I called hypertech, and asked them how much to unlock. The price is 220 shipped back, but they send back a new unit in its place.
I posted the serial info above if your interested in verifying this. I also can dig up the paypal receipt from Summit Racing for when I bought it.
At the end 330 bucks gets you a new one VS 500
-
01-29-2010, 04:08 PM #8
- Join Date
- Sep 2006
- Location
- Philadelphia
- Age
- 40
- Posts
- 207
- iTrader
- 1 (100%)
Smokey Gray Metallic- 1991 Nissan 240sx LS6
Clutch/Flywheel sold
-
02-05-2010, 12:37 PM #9
- Join Date
- Feb 2008
- Location
- San Diego
- Posts
- 8
- iTrader
- 0
still have the intake?
-
02-05-2010, 12:50 PM #10
- Join Date
- Sep 2006
- Location
- Philadelphia
- Age
- 40
- Posts
- 207
- iTrader
- 1 (100%)
Smokey Gray Metallic- 1991 Nissan 240sx LS6
I do, paypal is outtowinpahc@aol.com
-
02-07-2010, 05:46 AM #11
- Join Date
- Sep 2006
- Location
- Philadelphia
- Age
- 40
- Posts
- 207
- iTrader
- 1 (100%)
Smokey Gray Metallic- 1991 Nissan 240sx LS6
LS1 / TH350 kickdown cable and bracket sold
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
LS1 Fidanza Alum Fly-Wheel Spec Stage 3 Clutch
By tlgphoto in forum Parts For Sale / TradeReplies: 2Last Post: 05-08-2008, 08:15 AM -
lots of stuff
By smax in forum Parts For Sale / TradeReplies: 3Last Post: 07-06-2007, 07:39 AM -
Lots Of Good Stuff!!!
By ws6rufus in forum Parts For Sale / TradeReplies: 1Last Post: 06-18-2006, 04:50 AM -
Trans upgrade Spec & Fidanza
By henryhorton5 in forum Manual TransmissionReplies: 0Last Post: 03-12-2006, 11:47 AM -
Lots of stuff for sale!
By Batman in forum Parts For Sale / TradeReplies: 9Last Post: 11-16-2005, 07:18 PM
Bookmarks