Results 1 to 10 of 10

FS iron 408 long block with callies internals

This is a discussion on FS iron 408 long block with callies internals within the Parts For Sale / Trade forums, part of the Sponsors Group Pricing and Parts Review category; I'm selling this motor to go bigger cubes. It has less than 3,500 and has the following: Engine: Callies Dragonslayer ...

  1. #1
    Senior Member cam02ss's Avatar
    Join Date
    Aug 2005
    Location
    Purcellville, VA
    Posts
    2,139
    iTrader
    1 (100%)

    FS iron 408 long block with callies internals

    I'm selling this motor to go bigger cubes. It has less than 3,500 and has the following:

    Engine:

    Callies Dragonslayer Crank
    Callies Compstar Rods
    Diamond Pistons -2CC
    Diamond pro select piston rings
    Clevite bearings
    ARP main studs
    LQ9 stage 3 heads 320-330 CFM, comp springs
    Chromoly pushrods

    I originally started to switch this engine over to a solid roller setup, but changed direction mid way through. The motor put down 500 rwhp through a TH400 and 12 bolt w/ 4.11s turning 325 drag radials. It was also built to spray a 300 shot. PM with any questions,etc.

    Price- $5900 OBO. I'll consider reasonable offers but no low ballers please. The motor is still in the car, and here are some pics from a couple months ago while the intake, etc was still on.

    Thanks


    Last edited by cam02ss; 12-01-2009 at 06:30 PM.

  2. #2
    James Bond Spikito's Avatar
    Join Date
    Aug 2007
    Location
    Texas
    Age
    30
    Posts
    4,546
    iTrader
    4 (100%)

    2001 3.8 Black - sold
    2000 SS Black M6

    I really like your set up with the coils up front like that

  3. #3
    Senior Member cam02ss's Avatar
    Join Date
    Aug 2005
    Location
    Purcellville, VA
    Posts
    2,139
    iTrader
    1 (100%)
    Thanks man, that's one of my favorite things that we came up with for that car

  4. #4
    Senior Member cam02ss's Avatar
    Join Date
    Aug 2005
    Location
    Purcellville, VA
    Posts
    2,139
    iTrader
    1 (100%)
    Someone make me an offer! Need this motor gone!

  5. #5
    What I do? SHines-IT's Avatar
    Join Date
    Jun 2009
    Location
    FL, USA
    Age
    27
    Posts
    1,545
    iTrader
    1 (100%)
    2011 Prius

    How much bigger do you need to go? I would be interested in working something out, if I had something to put it in.

  6. #6
    What I do? SHines-IT's Avatar
    Join Date
    Jun 2009
    Location
    FL, USA
    Age
    27
    Posts
    1,545
    iTrader
    1 (100%)
    2011 Prius

    Come to think about it, would you be interested in a 63 Ford Falcon Convertible, they normally sell for a bit more then what you are asking for on ebay. I never listed it on ebay though. It's in good shape. Normally sells for about $1,500-2,000 more then what your asking. I would of course want for you to cover shipping. Last I checked it cost about $600-700 to ship a car cross country insured. Maybe $250-400 for the engine? Just throwing it out there. If I could get this, I am really then going to try and get the C5.

  7. #7
    Member zmg00camaross's Avatar
    Join Date
    Oct 2008
    Location
    missouri
    Posts
    764
    iTrader
    0

    pewter
    2000 camaro ss

    sorry for hi jacking but where did you get that rad support. nice set up i get there one day.

  8. #8
    Member DVrec21's Avatar
    Join Date
    Sep 2009
    Location
    PA
    Age
    28
    Posts
    202
    iTrader
    0

    Pewter
    99 z28

    Yooo I have never in my life seen such a sick ass setup.... that just looks freakin nasty....

    Edit: No, I'm just admiring it. cuz I'd have to sell my car just to be able to afford this.
    Last edited by DVrec21; 12-20-2009 at 08:55 PM.

  9. #9
    Senior Member Rhinohuey's Avatar
    Join Date
    Mar 2007
    Location
    Glendale, AZ
    Posts
    1,460
    iTrader
    0

    Black
    1999 Trans Am

    Quote Originally Posted by zmg00camaross View Post
    sorry for hi jacking but where did you get that rad support. nice set up i get there one day.
    certainly looks custom from what i can tell

  10. #10
    Senior Member MrMasterCraft's Avatar
    Join Date
    Nov 2009
    Location
    NOVA
    Posts
    1,266
    iTrader
    1 (100%)

    2002 C5 - M6 - Blue
    2000 Z28 - A4 - Pewter

    Is the motor still available? From what I can tell, it looks like the longblock you're selling, correct? You said this was taken "with the intake still on", so you're not including the intake? What make of cam and specs? Is this mainly a track only car? How many passes with the motor and on the jug? The picture is great, but what are you NOT including, because it looks like somebody took alot of thought and time into building this, and I'm contemplating just what I would need to buy, to get it running (but not completely rolling down the road). Thanks
    Last edited by MrMasterCraft; 12-26-2009 at 11:00 PM. Reason: Forgot little details


LinkBacks (?)

  1. 08-29-2014, 09:16 AM

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. For Sale: LS1 block and internals $400
    By 98TransAmWs-6 in forum Parts For Sale / Trade
    Replies: 4
    Last Post: 04-07-2014, 11:51 AM
  2. Iron block LQ4 vs. LS2
    By Jay37 in forum Internal Engine
    Replies: 7
    Last Post: 11-18-2010, 12:17 PM
  3. Question: 6.0 Iron Block
    By 98formy in forum General Help
    Replies: 6
    Last Post: 06-09-2008, 05:41 AM
  4. F/S LT1 383 Short Block Forged Internals
    By 1SIC LT1 in forum Western Members
    Replies: 0
    Last Post: 08-20-2007, 06:32 PM
  5. Looking for 6.0 Iron Block
    By Big G in forum Parts Wanted / Trade
    Replies: 0
    Last Post: 04-30-2006, 07:21 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •