Results 1 to 3 of 3

Fresh Gtp Heads, And Fresh Complete 408 For Sale!!!!!!

This is a discussion on Fresh Gtp Heads, And Fresh Complete 408 For Sale!!!!!! within the Parts For Sale / Trade forums, part of the Sponsors Group Pricing and Parts Review category; ...

  1. #1
    98UltraZ
    Guest

    Fresh Gtp Heads, And Fresh Complete 408 For Sale!!!!!!

    1.)
    LS1 STG 2 Ported by Craig @ GTP in Houston, The car was running 9.6's on the 347 and spray Crain dual springs, ti retainers, 61.5 cc. They are milled 30 thousandths. I just spent $400 on having them freshened.

    EDIT: NEW PRICE!! $1375
    http://photobucket.com/albums/b15/GS..._/GTP%20Heads/



    2.) 408 block for sale!
    This motor is COMPLETELY FRESH!! It was professionally assembled. The heads have roughly 300 miles since the valvejob. The rotating assembly was balanced, and it has brand new bearings and rings that were installed.


    408 ironblock 10.5:1 compression (with the heads that are on it)
    Stage 2 p&p heads 2.02/1.57 valves 4.8/5.3 heads (they are the same..) 65.8 cc (will provide flow sheet from SF600 test)
    Comp "R" lifters.
    Comp 7.4 hardened pushrods
    Lunati 244/252 .624/.629 112 lobe separation
    Clevite main and rod bearings
    4 crank Eagle
    Crower Rods
    JE reverse dome 16cc pistons


    It will have ALL of the pans and covers. No sensors, crank pulley, or intake though. No dyno time or 1/4 mile passes. This motor is fresh, and has not been run since the new bearings, rings, etc..

    EDIT: NEW PRICE!! $4950
    Last edited by 98UltraZ; 08-31-2005 at 12:05 PM.

  2. #2
    98UltraZ
    Guest
    GTP HEADS ARE SOLD!!!!!!

    408 block for sale!
    This motor is COMPLETELY FRESH!! It was professionally assembled. The heads have roughly 300 miles since the valvejob. The rotating assembly was balanced, and it has brand new bearings and rings that were installed.


    408 ironblock 10.5:1 compression (with the heads that are on it)
    Stage 2 p&p heads 2.02/1.57 valves 4.8/5.3 heads (they are the same..) 65.8 cc (will provide flow sheet from SF600 test)
    Comp "R" lifters.
    Comp 7.4 hardened pushrods
    Lunati 244/252 .624/.629 112 lobe separation
    Clevite main and rod bearings
    4 crank Eagle
    Crower Rods
    JE reverse dome 16cc pistons


    It will have ALL of the pans and covers. No sensors, crank pulley, or intake though. No dyno time or 1/4 mile passes. This motor is fresh, and has not been run since the new bearings, rings, etc..

    EDIT: NEW PRICE!! $4950

  3. #3
    98UltraZ
    Guest
    selling the 408 as a shortblock.... $3500 FIRM +shipping for the 408, it won't have the pushrods or heads...

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Fresh 6.0 build. what cam?
    By Willfully Armed in forum Internal Engine
    Replies: 2
    Last Post: 01-01-2015, 05:02 PM
  2. Question: what to use on fresh paint?
    By clg82 in forum Showcar and Detailing
    Replies: 6
    Last Post: 04-20-2009, 06:30 PM
  3. fresh .30 over 6.0 block. -- 6.0 heads,parts
    By jjz28 in forum Parts For Sale / Trade
    Replies: 9
    Last Post: 12-26-2008, 09:50 AM
  4. Fresh Veggies
    By Bobby97SS in forum Almost Anything Goes
    Replies: 19
    Last Post: 06-16-2008, 10:36 AM
  5. Built T-56 six speed for sale Fresh-0 miles
    By LS1Nova in forum Parts For Sale / Trade
    Replies: 9
    Last Post: 04-07-2006, 07:31 AM

Members who have read this thread: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •