DTS 12 bolt, CM pushrods, Springs, Plus More

**Hi-Po** · 06-05-2009, 04:04 PM

*** Click Pictures for larger image ***

I have quite a few parts laying around all in good condition. There all off/out of car.

DTS 12 bolt housing and Moser 30 Spline axles both in good condition. I went with a different setup that better suited my needs. I also have the carrier but I dont know if I want to sell it for a few reasons. Call me for details, you might just get yourself an awesome deal. The price on 3 channel DTS 12 bolt housing and axle shafts with drain and fill plugs, C-clips eliminators(with bolts and nuts), and hole drilled for rear brake lines and aluminum rear cover.

1000 bucks picked up. I dont really want to ship this because the shipping will kill both side of parties. I want this to be a good deal for both sides and shipping would kill that

Great rear end!

__________________________________________________ _________
LS1 intake. Great shape. -
40 bucks plus shipping
__________________________________________________ _________
GM yellow springs with appx 20,000 miles. Great spring for a rebuild. I ran this spring for 15,000 miles with zero problems -

40 bucks plus shipping

__________________________________________________ ________
COMP cams 7.300 Chrome Moly Hardened Push rods. Also used for appx 20,000 miles. Great condition, wouldnt think twice about running them.

50 bucks plus shipping

__________________________________________________ ______________
Stock 2005 LQ4 camshaft. Very similar to LS1 camshaft. . Nothing wrong with cam. Has less then 15,000 miles on it

50 bucks plus shipping

__________________________________________________ _______

_________________________________________________
Stock LS1 Timing chain

30 bucks plus shipping
______________________________________________
LS2 Crank gear, Brand new never installed, perfect condition. Will include LS1 Cam gear also.

25$ plus shipping

_________________________________

Stock LS1 injectors. 50,000 appx miles. Look great, zero defects. Plastic protective capped. Changed because my setup was maxing them out.

50 bucks plus shipping

__________________________________________________ _____

Stock Aluminum Driveshaft. Comes with 1350 U-joint that measures 1.12 inchs OD. Same size as NAPA part number 447. Come with Tranny yoke also. Has some minor wear marks on it.

50 bucks plus shipping *SALE PENDING
_______________________________
You can rest assured you will get the parts you pay for, no mystery buying. If you need my Phone number to talk about any parts listed, ecspecially the carrier for the 12 bolt (which is in good condition, was going to run it again) PM me and I will shoot you my phone number and see we can get you a great deal on a 12 bolt or some other parts

**Hi-Po** · 06-07-2009, 11:39 AM

Bump

**Hi-Po** · 06-09-2009, 05:26 PM

Lowered prices on almost everything by 10-15 bucks. Bump.

**chief98ls1** · 06-09-2009, 10:46 PM

send me a pm i will take the tranny mount please

**Hi-Po** · 06-10-2009, 04:13 PM

You cant recieve PM's. Email will have to do.

Thanks.

**SLP00blueSS** · 06-13-2009, 06:34 AM

where abouts in michigan are you? i'am interested in rr end

**Hi-Po** · 06-13-2009, 07:29 AM

South east Michigan. Livingston County. Shoot me a PM if you ever wanna come look at it. I can send you my phone number if you would like as well.

**Hi-Po** · 06-15-2009, 03:28 PM

I had to use the energy suspension mount on my car. My ES poly mount failed and needed this one. Sorry chief, I hope this didnt keep your build from moving forward, good luck with the Tune! Frost is the man, good luck.

**chief98ls1** · 06-16-2009, 12:46 AM

im not in no rush the frosted tuned ecu just came in. Im not gona race the car till july 11 and it is my race car . no biggy

**JoshieDoom** · 06-16-2009, 02:50 AM

i want the driveshaft... pm it up

**910van** · 06-21-2009, 06:39 AM

im sort of a newb here.....would that rear be better than the stocker in my WS6? im having some issues with mine now, and i need some info before i go rippn shit out and replacin what doesnt need replaced. but im in the market to build another rear. just let me know. thanks

**Hi-Po** · 06-21-2009, 11:00 AM

Light years better then your stock 10 bolt.

**910van** · 06-22-2009, 02:03 AM

what all would i need if i bought this rear from you?

**Hi-Po** · 06-22-2009, 07:45 AM

Originally Posted by 910van

what all would i need if i bought this rear from you?

Depends. If you bought the housing and axles from me, that would leave a carrier(posi) and a rebuild kit (gears/bearing). I know a full rebuild kit with ring and pinion is 380 shipped from Moser.

**910van** · 06-23-2009, 12:29 PM

pm me some prices and lets go from there. i gotta do something. all that work for the wheel bearing and turns out both the carrier bearing and pinion bearing are gone as well........

oooh well, gotta learn sometime. lol thanks man

**Wreckless WS6** · 07-07-2009, 03:16 AM

free bump...

**Dr.Crash** · 07-07-2009, 10:58 AM

TTT

**Hi-Po** · 07-07-2009, 05:40 PM

Push rods are sold. The drive shaft is sold to Joshie Doom. Just havent shipped it to him. Its a crazy low price at 50 bucks. At least half off

Anyone is the MI area, I gurantee I can get you a great deal on a 12 bolt housing and axles. All these prices are low. Those injectors are priced to sell. Ide tell yall to make some offers, but these are rock bottom prices, Ive already lowerd all prices by 15-20 bucks. Wouldnt hurt though, let me know guys and gals.

**Hi-Po** · 07-23-2009, 01:54 PM

Bump.

**camaro22** · 07-29-2009, 05:23 AM

still have the rear end for sale?

Thread: DTS 12 bolt, CM pushrods, Springs, Plus More

Thread Tools

DTS 12 bolt, CM pushrods, Springs, Plus More

its oootay

Thread Information

Users Browsing this Thread

Similar Threads

Do i need new pushrods/springs with cam

Pushrods and Springs as a Precaution?

looking for cam springs and pushrods

918 springs, Ti Ret and 7.4 pushrods

LS6 Springs and pushrods, Full AC

Bookmarks

Bookmarks

Posting Permissions