Results 1 to 4 of 4

----Custom fiberglass sub box for two 15" L7s/L5s----

This is a discussion on ----Custom fiberglass sub box for two 15" L7s/L5s---- within the Parts For Sale / Trade forums, part of the Sponsors Group Pricing and Parts Review category; Hello ladies and gents! Since I'm getting rid of the bird, my entire audio system is coming out. I'm transferring ...

  1. #1
    Junior Member
    Join Date
    Aug 2005
    Location
    FL
    Posts
    11
    iTrader
    0

    red
    96 V6

    ----Custom fiberglass sub box for two 15" L7s/L5s----

    Hello ladies and gents!

    Since I'm getting rid of the bird, my entire audio system is coming out. I'm transferring my components and headunit to my next car, but the subs, box, and amps need to go. I already have someone possibly interested in my two 15" L7's and I'm kinda hanging on to the amps for now.... (until I decide exactly what I want to do) But if someone is interested in the subs or the amps, email me and we can talk. See my sig for details on the amps and such.

    Anyway, the sub box is up for grabs. It is part fiberglass and part 3/4" MDF. The fiberglass is alternated layers of Kyntex 1708 (kevlar biaxil) and a heavy weight chopped mat. So it's ULTRA strong. The box has a center divider glassed into place. The top is currently covered with a charcoal vinyl that matches the charcoal interior VERY well. It would go pretty well with the black interior too. Of course, it wouldn't be hard at all to re-cover it with whatever you want. Hell, if you really want.... cut me money for the supplies ($20 bucks maybe) and I'll do it for you before it's shipped. It's that easy. This box will give you the most air space possible without removing the side panels. Both side panels DO fit into place with the box installed. Let the pics begin!




    For pics of it installed, see my sig. The white lines around the sub holes is some weatherstripping I used to ensure a tight seal between sub and the box. It can be easily removed without damaging the vinyl. I'll remove it and retake pics if anyone is worried about that. You can also see a couple bumps in the covering up top. That's just a couple drops of resin that I didn't sand off before I covered the box. Didn't notice them until I was done, and was far too lazy by then to recover it. Again, if you would like to provide money for the supplies, I'll remove them and recover the box before it's shipped. Well, thats about it. As you can see, it looks pretty damn nice when installed. And this is the most airspace that is possible out of the 4th gens. If you have the 15" Kicker L5's, L7's or any other square sub... this box is for you. I'd like to see $199 + shipping for this, but feel free to offer up. As most of you know, Subthump charges $220+ for all MDF boxes that don't have near the airspace this provides. Not knockin on them at all, but this one is just plain different then the ones they have to offer. Please take that into consideration.

    Disclaimer: As I always do with every item I sell on the internet, it's as is. Why? Because I've been there and done that and gotten burned. I'm too old for that. After the item leaves my hands, it's out of my hands for good. With that said, I always do my best to make sure both parties are satisfied. This is why I have a FLAWLESS feedback record. Here's my Ebay feedback:
    http://feedback.ebay.com/ws/eBayISAP...me=STRK:ME:UFS
    And here's feedback from a paintball website I trade on frequently:
    http://www.pbnation.com/showthread.p...8#post20744898

    Donno if my sig is working, here's the link:
    http://www.cardomain.com/ride/342548...5c%22_blank%5c
    Last edited by firebirdude; 10-25-2006 at 08:02 PM.

  2. #2
    Junior Member
    Join Date
    May 2006
    Location
    san diego
    Age
    34
    Posts
    17
    iTrader
    0

    silver
    1998 camaro z28

    pics no worky...Also where are you located??

  3. #3
    Junior Member
    Join Date
    Aug 2005
    Location
    FL
    Posts
    11
    iTrader
    0

    red
    96 V6

    Pics fixed and I'm in 32901. Melbourne, FL

  4. #4
    Junior Member
    Join Date
    Aug 2005
    Location
    FL
    Posts
    11
    iTrader
    0

    red
    96 V6

    Ttt!!!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Gauging Interests: Custom Fiberglass Console
    By W68Firebird02 in forum Parts For Sale / Trade
    Replies: 3
    Last Post: 07-08-2007, 11:23 PM
  2. FS: 400W amp and 12" x2 fiberglass sub box
    By knger in forum Western Members
    Replies: 2
    Last Post: 01-01-2007, 09:43 PM
  3. Custom fiberglass box / Sub (will seperate)
    By xssive in forum Parts For Sale / Trade
    Replies: 3
    Last Post: 11-30-2006, 03:56 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •