Results 1 to 12 of 12

complete valvetrain upgrade. EPS CAM!!!

This is a discussion on complete valvetrain upgrade. EPS CAM!!! within the Parts For Sale / Trade forums, part of the Sponsors Group Pricing and Parts Review category; ok guys selling my performance parts from my LS1, my loss your gain. this is everything you need for a ...

  1. #1
    Member
    Join Date
    Apr 2012
    Location
    virginia
    Posts
    132
    iTrader
    0

    blue
    2001 trans am

    complete valvetrain upgrade. EPS CAM!!!

    ok guys selling my performance parts from my LS1, my loss your gain.

    this is everything you need for a high performance high revving LS engine. these parts have7 ONLY 500 miles on them, i had a piston break and went back to a new engine. The cam had some impact marks, no dings or dents but i had a machine shop polish it, there are no damage to the lobes or circles. everything else is pretty much new. all sold as is, each is listed individually so look back to make sure what your getting, some parts may not be included as pictured but the auction will tell you as it changes.

    EPS custom grind cam, 232/234 dur .629/.629 lift 112lsa +4 adv. AMAZING cam. very similar to the torquer TSP cam but better.
    Crane cam gold racing rockers 1.7 ratio, stud mounts, guide plates, poly locks
    Crane cam chromoly pushrods 7.25 lift, required for the rockers
    Crane cam double roller timing chain
    Crane cam double valve springs, titanium retainers, new seats, locks, and i will include the seals if you want but new ones are like $15
    melling ported oil pump, yes it clears the timing cover and chain
    LS2 lifter treys
    LS7 lifters


    this setup was amazing but my bottom end just was not up for this power, it was estimated at around 500,
    PLEASE MAKE AN OFFER.

    here is a video of my car on this setup


  2. #2
    Member
    Join Date
    Apr 2012
    Location
    virginia
    Posts
    132
    iTrader
    0

    blue
    2001 trans am

    timing chain sold.

  3. #3
    Moderator 98TransAmWs-6's Avatar
    Join Date
    Apr 2010
    Location
    Fairfax, VA
    Posts
    3,596
    iTrader
    3 (100%)

    Black/ Silver
    98 TA WS6/ 01 C5 Corvette

    How much for the rockers and are they in good working condition?
    1998 Trans Am WS6 - Phantom
    421 CI LQ9, Tick Performance Custom Cam, TFS 255cc LS3 heads, Kooks 2" LT headers, Kooks 3" True Duals w/ high flow cats, FTP 104 lid, Speed Density Tune, 4" silicon tube, LS6 VCT, FAST 102 Intake, NW 102 TB, Oil Catch Can, SLP Bilstein Shocks w/ Vogtland Springs, CTS-V 4-piston Calipers w/C6 Z06 rotors, Stainless Steel Brake Lines, R1 concepts premium rotors, Hawk HP+ brake pads, VFN WSQ Hood, C5-R timing chain, SLP oil pump, E85 tune, Walbro 450 fuel pump, Deatschwerkz 95# injectors, Breathless performance headlights, Frost Tune, !HVAC.
    (Coming Soon) BMR DSL, UMI TQ Arm
    421 LQ9 14.8:1 on E85 Build/

  4. #4
    She Moderator KahanaReef's Avatar
    Join Date
    Jul 2008
    Location
    So Cal
    Age
    54
    Posts
    15,589
    iTrader
    1 (100%)

    Arctic White
    2000 Camaro Z28

    Please post prices for the items you have listed.

  5. #5
    Member
    Join Date
    Apr 2012
    Location
    virginia
    Posts
    132
    iTrader
    0

    blue
    2001 trans am

    was hoping to get $1500 for all. for something specific please PM or make offer on the lot or specifics, taking a large loss.

  6. #6
    Your dealership guy konigandy6's Avatar
    Join Date
    Aug 2007
    Location
    Romeo, MI
    Posts
    6,557
    iTrader
    0

    Velocity Yellow
    2008 Corvette Z06

    You said your bottom end couldn't handle it... so did your engine blow up? Are any of the parts you are selling damaged?

  7. #7
    Member
    Join Date
    Apr 2012
    Location
    virginia
    Posts
    132
    iTrader
    0

    blue
    2001 trans am

    the only thing that was damaged was the block, crank, rods, and the dead piston. everything else is perfect. i took the cam to a performance shop and had it looked over to make sure. all pushrods are straight, rockers are flawless. everything is premium

  8. #8
    Member
    Join Date
    Apr 2012
    Location
    virginia
    Posts
    132
    iTrader
    0

    blue
    2001 trans am

    lifters, treys, oil pump, timing chain all sold

    rockers, pushrods, valve spring kit, cam remain.... make offer

  9. #9
    Member
    Join Date
    Mar 2006
    Location
    West Virginia
    Age
    38
    Posts
    763
    iTrader
    2 (100%)

    Pewter
    Y2K WS6

    Price on cam?

  10. #10
    Your dealership guy konigandy6's Avatar
    Join Date
    Aug 2007
    Location
    Romeo, MI
    Posts
    6,557
    iTrader
    0

    Velocity Yellow
    2008 Corvette Z06

    Just a word, per forum rules you MUST list prices for everything you sell. This isn't a bidding war, nor can you just say "make offers." You must represent what you're selling properly, and list prices accordingly.

    If you have any questions, refer to the classified rules:
    Classified Rules..... Please Read Before Posting!!!!!

  11. #11
    Junior Member Mike99V6's Avatar
    Join Date
    Aug 2006
    Location
    in the basement
    Posts
    35
    iTrader
    0

    red
    1999 Camaro V6

    Fuck buying any of those parts. That cam took multiple hits, so it's fubar, I don't care how much it's been polished. And when you polish a cam, you change the lobes, so it wouldn't be the same anyway! And when that piston exploded, where do you think all that debris went? All of those parts are suspect, and I wouldn't put any of them in a cheap junkyard build, let alone a motor I gave a shit about.

  12. #12
    Your dealership guy konigandy6's Avatar
    Join Date
    Aug 2007
    Location
    Romeo, MI
    Posts
    6,557
    iTrader
    0

    Velocity Yellow
    2008 Corvette Z06

    Please keep these posts civil, and if you're not interested in buying, don't post.

    OP, please get prices on what you are selling or this thread will be deleted. Thank you

    PM me if you have any questions.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 19
    Last Post: 06-28-2012, 01:47 PM
  2. Valvetrain Upgrade
    By ls1camino in forum Internal Engine
    Replies: 4
    Last Post: 11-18-2008, 05:08 PM
  3. cam without valvetrain upgrade?
    By cdorch in forum Internal Engine
    Replies: 30
    Last Post: 11-12-2008, 06:24 PM
  4. when is time to upgrade valvetrain?
    By greatwhiteZ28 in forum Internal Engine
    Replies: 5
    Last Post: 09-06-2007, 06:05 PM
  5. Simple Upgrade Solutions - Oem Upgrade 2003 Bmw X5
    By Ed Blown Vert in forum Stereo and Electronics
    Replies: 0
    Last Post: 11-16-2006, 09:18 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •