built 4l60e and rear end fs

[smax]

the transmission is a stage 4 4l60e built by extreme performance in okc. it has about 3k miles on it. if you are converting to a4 from m6 i can hook you up with some swap parts also. parts list

Overhaul w/ Performance race clutches w/ Kolene steels
Shift kit (firm shifts)
Kevlar 2-4 band
Torque drive kit Includes:
Hardened input shaft & housing
Extreme duty reverse reaction shell & bearing
Hardened overrun piston
29-element dual cage forward sprag
Low & Reverse roller clutch (sprag)
Super servo
High output pump slide spring (better pump volume)
Servo release valve (helps prevent 3-4 clutch burn-up)
5 pinion input carrier (front planetary) 24218063
5 pinion reaction carrier (rear planetary) 24227002
Extreme duty reaction carrier shaft
Spacer plate
Filter kit

$1400

rear end is a 10 bolt with 3.73's and a nice aluminum dif cover. has less than 3k miles on it since gears, all new seals and bearings and dif cover were installed. the car had no traction control. the rear end will come complete from caliper to caliper. the calipers have been clearanced for a set of 15" wheels. worked great.

$400

will consider trades or partial trades for
t56
mezier electric water pump
5.3 or 6.0 engine(prefered trade)