Results 1 to 18 of 18
Thread: 3.73 Gears With Install Kit
-
08-16-2010, 09:59 AM #1
- Join Date
- Nov 2009
- Location
- Altoona and Downingtown, PA
- Posts
- 271
- iTrader
- 0
Black- 1998 Z28 and 67 Firebird
3.73 Gears With Install Kit
hey everyone! I have a brand new set of 3.73 Gears and Installation Kit still in the box for sale. I bought them from sam strano at stranoparts.com. I'm looking to sell them for 250+shipping, as i bought them for about 350+shipping. I'm using the money i get to buy an LS6 Intake Manifold, so I will also take trades for that as well.
Last edited by 98Z28CamaroJG; 08-20-2010 at 10:19 AM.
-
08-18-2010, 01:03 PM #2
- Join Date
- Nov 2008
- Location
- Holiday,FL
- Age
- 47
- Posts
- 1,378
- iTrader
- 0
Green- 1997 Camaro Z-28
What size rear? stock 10bolt?
-
08-18-2010, 07:53 PM #3
- Join Date
- Nov 2009
- Location
- Altoona and Downingtown, PA
- Posts
- 271
- iTrader
- 0
Black- 1998 Z28 and 67 Firebird
Yessir. I was going to put them in but I have too many miles on my stock rearend, so I'm going with the manifold instead
-
08-20-2010, 10:19 AM #4
- Join Date
- Nov 2009
- Location
- Altoona and Downingtown, PA
- Posts
- 271
- iTrader
- 0
Black- 1998 Z28 and 67 Firebird
Bump for 250+shipping
-
08-22-2010, 08:04 AM #5
- Join Date
- Jun 2006
- Location
- Fredericksburg,Virginia
- Age
- 40
- Posts
- 345
- iTrader
- 0
RED- 2002/Z28
2 or 3 seriers carrier..
-
08-22-2010, 05:10 PM #6
- Join Date
- Nov 2009
- Location
- Altoona and Downingtown, PA
- Posts
- 271
- iTrader
- 0
Black- 1998 Z28 and 67 Firebird
Not sure what that question means... Lol
-
08-22-2010, 05:56 PM #7
- Join Date
- Jun 2006
- Location
- Fredericksburg,Virginia
- Age
- 40
- Posts
- 345
- iTrader
- 0
RED- 2002/Z28
They have 308 gear and lower carrier thats a 2 seriers carrier and 323 gear and higher carrier that 3 seriers carrier.
-
08-23-2010, 08:00 PM #8
- Join Date
- Nov 2009
- Location
- Altoona and Downingtown, PA
- Posts
- 271
- iTrader
- 0
Black- 1998 Z28 and 67 Firebird
Well in that case it must be a 3 carrier as it's 373
-
08-24-2010, 04:53 PM #9
-
08-24-2010, 08:18 PM #10
- Join Date
- Nov 2009
- Location
- Altoona and Downingtown, PA
- Posts
- 271
- iTrader
- 0
Black- 1998 Z28 and 67 Firebird
My car is a 98 z28 m6. And if I'm not mistaken they came stock with 3.42 gears
-
08-26-2010, 01:27 PM #11
that means its a 3 series carrier. Its based off whatever factory gear is in the car... Now, next ?, is the car 3 or 4 channel abs??? If its 3 channel the ring gear will have an exiter ring on it and the rearend will have a sensor on the top in the center of the chunck. 4 wheel will have two sensor on the outer outer axle tubes where the brakes mount on the axles. This is all important to make sure the abs stays functional...
Last edited by JRENIGAR; 08-26-2010 at 01:31 PM.
-
08-27-2010, 03:55 AM #12
- Join Date
- Nov 2009
- Location
- Altoona and Downingtown, PA
- Posts
- 271
- iTrader
- 0
Black- 1998 Z28 and 67 Firebird
I don't really see how the abs affects what gears I'm sellin here...haha
-
08-30-2010, 03:32 PM #13
-
08-31-2010, 11:30 AM #14
- Join Date
- Nov 2009
- Location
- Altoona and Downingtown, PA
- Posts
- 271
- iTrader
- 0
Black- 1998 Z28 and 67 Firebird
Thank you haha, I was so confused...and yeah I the shims really are a pain haha. I wish my rear could take a gear swap, but oh well haha
-
09-12-2010, 11:37 PM #15
- Join Date
- Nov 2009
- Location
- Altoona and Downingtown, PA
- Posts
- 271
- iTrader
- 0
Black- 1998 Z28 and 67 Firebird
Bump!
-
09-20-2010, 03:33 PM #16
- Join Date
- Nov 2009
- Location
- NOVA
- Posts
- 1,266
- iTrader
- 1 (100%)
2002 C5 - M6 - Blue- 2000 Z28 - A4 - Pewter
Did you order them for YOUR car specifically? Did you specify what gear was in your car when you ordered it? I have a friend that is interested, he's rolling on 2.73s right now though (which would be a 2 series carrier), so just wondering if these will work
-
09-21-2010, 05:28 AM #17
- Join Date
- Nov 2009
- Location
- Altoona and Downingtown, PA
- Posts
- 271
- iTrader
- 0
Black- 1998 Z28 and 67 Firebird
I did order them for my car specifically, which come with 3.42 gears, so my cars are 3 series sorry
-
12-26-2010, 07:34 AM #18
- Join Date
- Jun 2008
- Location
- Euclid,ohio
- Posts
- 197
- iTrader
- 0
Black- 1998 Z28
the 3channel exciter ring is mounted on the carrier and not on the ring gear. changing gears ONLY will not affect 3 or 4 channel operation.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
3-Series 3.73 Gears with Install Kit
By 98Z28CamaroJG in forum Parts For Sale / TradeReplies: 2Last Post: 09-16-2010, 05:44 PM -
how to install gears just the pinion
By kibz28 in forum DrivetrainReplies: 1Last Post: 08-24-2009, 08:13 AM -
2 series gears install help!!!!!
By MNZ28 in forum DrivetrainReplies: 7Last Post: 01-27-2009, 02:32 PM -
4.10 Gears/Install Kit
By SApache40 in forum Parts For Sale / TradeReplies: 3Last Post: 06-05-2007, 05:47 PM -
3.42 gears and install kit
By 1BADZ in forum Parts For Sale / TradeReplies: 6Last Post: 08-14-2006, 02:13 PM
Bookmarks