rwhp calculator

[stangslayer98]

anyone know of a site that has this calculator without having an ET time..........i know parasitic loss is around 20% or so

[Sarge]

Give me a list of your mods.....cam specs....best you can....

[LT1 > LS1]

http://www.csgnetwork.com/automotiveconverters.html

[stangslayer98]

thanks sarge list goes lid,85mm mass air ls6 intake, LT headers, off road y-pipe, magnaflow cat back, prc 2.5 heads 232/234 .595/598 cam

[310stanger]

stanger is guessing 430rwhp

[Nhra Firebird]

425 rwhp

[Stone]

425/415

[SeVeReDiStOrTiOn]

432rwhp

[310stanger]

haha the stanger is damn close! lol

[Sarge]

Yeah you are....horsepower is for salesman...I say the kid should be putting out a nice peak of 452RWTQ.....with that cam.....nice curve....yup....

[310stanger]

Yeah you are....horsepower is for salesman...I say the kid should be putting out a nice peak of 452RWTQ.....with that cam.....nice curve....yup....

yeah torque rules. nothing like snapping you and your passengers neck gigglin the whole time. i love having a passenger get out of the car green cause of neck breakin torque'

[Mr. Luos]

What tranny? What rearend? What driveshaft?

[Stone]

Yeah you are....horsepower is for salesman...I say the kid should be putting out a nice peak of 452RWTQ.....with that cam.....nice curve....yup....

This was my curve with teh same cam(but on an ls2 and stock heads)Take into thought i have more mods than he does but you get the idea....curve should be close im guessing; but you know more about this than me Sarge

[Sarge]

Yup....good set of breathing heads make about 30-40lbs of RWTQ. Nice power curve there...good tuning for sure....

[Stone]

Yup....good set of breathing heads make about 30-40lbs of RWTQ. Nice power curve there...good tuning for sure....

Chuck at HPE.....i was going to go to your guy but my computer was locked by Chuck the first time

[stangslayer98]

m6 with stock rear and shaft