Results 1 to 18 of 18
Thread: Qucik question about the 360
-
06-26-2010, 12:34 PM #1
Qucik question about the 360
When I have to reapply the heat sink paste, can I use nailpolish remover to clean the old stuff off of it. I just did the penny trick yesterday and it didnt work. Just wanted to know if nailpolish remover was ok the clean the surface before I did anything.
I also went to home depot and got the following parts...
4- 5mm screws
16- 5mm stainless steel washers
8- 5mm nylon washers
I didnt want to order the kit because I have all the parts except the cleaning solution to clean the heat sink with. I thought I could use nailpolish remover for this."Life is to short to drive a slow car"
Gone but not forgoten: 1998 Pontiac Trans Am M6 "The Black Bandit"
Bought- 11-18-05
Sold- 10-14-08
-
06-27-2010, 02:08 PM #2
I took the pennies out of the motherboard because they didnt work. Should I re-install then go with the screws and washers, or can I install them w/o the pennies???
-
06-27-2010, 02:28 PM #3
clean the chips with wd-40 and use some q-tips to do it and rub lightly with a paper towel.
-
06-27-2010, 02:44 PM #4
Last edited by rajiv1998; 06-27-2010 at 02:50 PM.
-
06-27-2010, 07:25 PM #5
man do i smack the shit out of you now or later . Do you even read anything i write. Rubbing alcohol might work but havent tried it. I found that WD40 works well at getting all that compound off the chips. No need to heat the damn thing up, just read and do what i said in the other thread, though im sure your going to f-it up. I should just have you bring it by my work and ill fix it for you for 20 bucks
-
06-27-2010, 07:42 PM #6
-
06-27-2010, 07:45 PM #7
small screw driver or maybe for you a tooth pick would be better to get the heavier stuff off, then some wd40 for the rest
-
06-27-2010, 07:47 PM #8
-
06-27-2010, 07:49 PM #9
^ Yeah.....take up his offer and pay him $20 to fix it
┌∩┐(◕_◕)┌∩┐
Man: The Mods you are fighting,
they are the biggest Men I have ever seen. I
wouldn't want to fight them!
Me: That is why no one will remember your name!
-
06-27-2010, 07:50 PM #10
yea, let someone that knows what they are doing fix it for you
-
06-27-2010, 07:51 PM #11
-
06-27-2010, 07:52 PM #12
-
06-27-2010, 07:54 PM #13
just some of the crap i fix
http://community.webshots.com/user/bubagumpshrimp
-
06-27-2010, 08:00 PM #14
-
06-27-2010, 08:06 PM #15
-
06-28-2010, 10:30 AM #16
- Join Date
- Mar 2009
- Location
- Milwaukee
- Posts
- 3,276
Arctic White, red/gray- 1997 Corvette, 92 Typhoon
I love how she starts to laugh when it slides up and over her ass but the clip ends right as she starts to laugh.
-
07-03-2010, 01:22 PM #17
well did you fix it or f-it up
-
07-03-2010, 04:39 PM #18
I just put a message on the members feed back saying thank you
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
IM and TB size, qucik question
By 1991ls13 in forum External EngineReplies: 1Last Post: 08-14-2010, 05:04 PM -
speedometer question + top speed question
By Krazy351w in forum General HelpReplies: 7Last Post: 06-21-2007, 05:51 PM -
HPIII question (not the same old question)
By slims00ls1z28 in forum Computer & TuningReplies: 5Last Post: 06-01-2007, 04:55 PM -
97 Bird Headlight question also engine noise question
By Zapper2003 in forum General HelpReplies: 2Last Post: 12-13-2006, 03:03 AM -
Sex Question spinoff- PORN QUESTION
By egaian in forum Almost Anything GoesReplies: 77Last Post: 07-26-2006, 03:07 PM
Bookmarks