Results 1 to 13 of 13
  1. #1

    I am also looking for a safe way to...

    get some goo off of my car. I didn't realize it, but I parked underneath a pine tree some time ago and had some sap drip onto the paint.

    Does anyone have any ideas how to get this stuff off without completely f'n up the paint more than I already have? Would "goo be gone" do anything? I tried a bit of it, but didn't seem to make any progress in the few minutes I let it soak in.

  2. #2
    Single Malt rbob93's Avatar
    Join Date
    Aug 2005
    Location
    Ft. Lauderdale, FL
    Age
    75
    Posts
    2,706

    Sebring Silver
    2000 CamaroSS

    WD-40 if it's still gooey

  3. #3
    Impounded 86 IROC-Z's Avatar
    Join Date
    Aug 2005
    Location
    .
    Age
    35
    Posts
    11,676

    Everything fiberglass
    2005 Amberlamps

    If you can't get it off, you could park under a tree again, and get the sap all over the car, so it looks even, instead of looking ugly being in that one spot.

  4. #4
    Quote Originally Posted by rbob93 View Post
    WD-40 if it's still gooey
    The WD-40 won't hurt the paint?

  5. #5
    Senior Member transamprincess98's Avatar
    Join Date
    Oct 2002
    Location
    Land of Gas Refineries
    Age
    45
    Posts
    3,571
    CT6

    Try olive oil. It's non abrasive won't damage the paint and should actually take the sap off

  6. #6
    down in it 310stanger's Avatar
    Join Date
    Aug 2005
    Location
    nj
    Age
    41
    Posts
    11,020

    white
    90 Mustang 5.0

    bug and tar remover?

  7. #7
    Single Malt rbob93's Avatar
    Join Date
    Aug 2005
    Location
    Ft. Lauderdale, FL
    Age
    75
    Posts
    2,706

    Sebring Silver
    2000 CamaroSS

    Quote Originally Posted by my5thNewUsernameHere View Post
    The WD-40 won't hurt the paint?
    No it won't.
    Besides....you're gonna follow up with a bit of wax. It's not like leaving fuel on there.

    Speaking of which.....
    Your car wax has "Petrolium Distillates" in it. Read the lable.

  8. #8
    Member Scanlamp's Avatar
    Join Date
    Aug 2005
    Location
    Colorado
    Age
    62
    Posts
    376

    Black Hardtop
    01 NHRA Formula

    you might want to ask the guys in the detailing section.

  9. #9
    Quote Originally Posted by transamprincess98 View Post
    Try olive oil. It's non abrasive won't damage the paint and should actually take the sap off
    Plus it will make the car taste good!

    Quote Originally Posted by 310stanger View Post
    bug and tar remover?
    Tried that first, no such luck.

    Quote Originally Posted by rbob93 View Post
    Speaking of which.....
    Your car wax has "Petrolium Distillates" in it. Read the lable.
    True, but it's not as concentrated. I just want to be sure before I make things worse.

    Quote Originally Posted by Scanlamp View Post
    you might want to ask the guys in the detailing section.
    What? Leave AAG? That's a good idea, I should hit them up.

  10. #10
    No Compromise davered00ss's Avatar
    Join Date
    Jul 2005
    Location
    Plainfield CT
    Posts
    382

    RED
    2000 Camaro SS

    Clay bar. Meguiars or Mothers. I tried the Meguiars and it takes off pine sap.

  11. #11
    Quote Originally Posted by davered00ss View Post
    Clay bar. Meguiars or Mothers. I tried the Meguiars and it takes off pine sap.
    Clay bar? Is that something that the auto stores typically carry? You're in my neck of the woods, maybe I should cruise over to your place.

  12. #12
    No Compromise davered00ss's Avatar
    Join Date
    Jul 2005
    Location
    Plainfield CT
    Posts
    382

    RED
    2000 Camaro SS

    I just clayed the camaro. You can get the kit at Walmart for $15.\

    Where in Ct are you?

  13. #13
    lmpounded SandmanWs7's Avatar
    Join Date
    Jan 2006
    Location
    Dallas, Texas
    Posts
    8,030

    Silver
    2007 CTS-V

    SAW THIS:


    Removing tree sap from a car's finish is a problem that we deal with on a regular basis. We've found that by hand-buffing the sap droplets with rubbing alcohol, we're able to remove the sap pretty well because the alcohol acts as a solvent to break up and dissolve it.

    For some cars, though, removing the sap can require a good deal of work, especially when there is a large amount of sap, or when it's obvious that the sap has been left on the finish for an extended period of time. For these cases, we experimented to find a quicker, easier method of sap removal. By hand buffing the sap-covered areas with a light-duty compound, we remove the hardened "shell" on the sap droplets. Then we use the rubbing alcohol. The light-duty compound helps to soften up the sap-covered areas so that the rubbing alcohol can dissolve the droplets faster and with less effort.

    This method also allows the detailer to apply less pressure on the droplets, so there's less change of scratching the area. Once the sap has been completely removed, we buff the surface again with light-duty compound to clean up any marks that might have been made during the hand-rubbing stage.

    The last step is to apply a coat of wax with a protective glaze finish for a deep shine without any swirl marks. We then recommend that the customer park their car in a different spot, away from trees that weep.

    Other alternatives:
    You can use the following things to remove tree sap, in this order: Bug and tar remover (carried at any auto shop)
    Kerosene and a rag (put kerosene on rag, dab sap spot repeatedly)
    Gasoline and rag (same procedure as kerosene) As soon as the sap is removed, wash the area with soap and water, then wax it.


    Start with the bug and tar remover, this is the mildest of the three.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Safe N20 Kit??...
    By tyxpx in forum Nitrous
    Replies: 13
    Last Post: 05-02-2010, 04:31 PM
  2. Is it safe?
    By blackwidowls1 in forum External Engine
    Replies: 1
    Last Post: 08-19-2007, 09:21 AM
  3. what kr is safe?
    By matt89 in forum Forced Induction
    Replies: 7
    Last Post: 07-21-2007, 06:23 PM
  4. I am looking for a safe way..
    By WhiteHotSS in forum Almost Anything Goes
    Replies: 20
    Last Post: 06-15-2007, 11:17 AM
  5. Is this safe?
    By Rowen in forum General Help
    Replies: 4
    Last Post: 08-14-2005, 02:33 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •