Results 1 to 2 of 2

air intake install

This is a discussion on air intake install within the General Help forums, part of the 5th Generation Chevrolet Camaro 2010 - 2015 category; thought i would show how to install a typical air intake stock airbox and piping loosen clamp at throttle body ...

  1. #1
    Super Moderator
    mrr23's Avatar
    Join Date
    Jul 2005
    Location
    orlando, fl
    Posts
    7,187

    black
    2014 camaro ss

    air intake install

    thought i would show how to install a typical air intake

    stock airbox and piping



    loosen clamp at throttle body



    pull out the pcv line



    remove MAF



    detach air filter lid and pull air intake tract out. the stock box likes to collect debris



    remove the two 10mm nuts that hold the airbox to the engine bay



    pull the box out. pay attention to the inlet duct.



    this is what it looks like all removed



    this particular intake system you bolt the tow sides together, slide the air filter adapter through the hole, put seal all the way around the box





    install MAF into tube, put elbow onto the tube, put connector onto air filter adapter, attach supplied hose to tube and pcv hose, slide all together and clamp together. should look like this when done

    Last edited by mrr23; 02-09-2018 at 06:20 PM.

  2. #2
    Super Moderator
    mrr23's Avatar
    Join Date
    Jul 2005
    Location
    orlando, fl
    Posts
    7,187

    black
    2014 camaro ss

    this particular intake system didn't come with short screws for the MAF. so, i drilled through and used the stock screws. i might redo the hose for the pcv. don't like the routing. they could have done better. can definitely hear the air sucking in the motor from inside the car.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Question: F.A.S.T Intake Install
    By Dr.Crash in forum External Engine
    Replies: 17
    Last Post: 02-05-2009, 04:28 PM
  2. LS6 Intake Install
    By TheGimp711 in forum External Engine
    Replies: 2
    Last Post: 02-03-2008, 10:24 AM
  3. Intake install
    By Wheeler99WS6 in forum External Engine
    Replies: 0
    Last Post: 04-09-2007, 05:38 PM
  4. Need some help after Intake/Cam install
    By Barry00Z in forum External Engine
    Replies: 4
    Last Post: 07-23-2006, 07:46 PM
  5. ls1 intake install
    By wayfastws6 in forum External Engine
    Replies: 1
    Last Post: 04-16-2006, 11:51 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •