Results 1 to 3 of 3
Thread: ~Custom Rear Mount HELP~
-
09-15-2006, 12:05 AM #1pyro71985Guest
~Custom Rear Mount HELP~
Ok well I think I have just about enough money to complete this entire kit....
Keep in mind this is a street and OCCASIONAL track car....
Now my goal is to have a set up that spools pretty quick at or below 3000rpms (preferably below) and make around 500rwhp at around 5psi (if possible) with a custom rear mount setup. With the option of turning it up to around 600-650rwhp.
Heres what I had in mind....and if anyone can help with the ones im not sure of PLEASE DO!
t67 turbo (dono what ar)
6.0 Heads (anything better? what gain will i see?)
z06 Camshaft (anything better? what gain will i see?)
Spec 3 clutch
TiAL BOV (dono 9psi? 11psi?)
Wastegate (not sure which is a good one)
42lb Mototron injectors (should i go bigger?)
255lph Walbro fuel pump
valve springs (not sure which ones)
pushrods (not sure which ones)
Ebay Intercooler w/ 3" piping
Tilton Differential Pump
2.25" piping from turbo to MAF
Anything I missed? Any suggestions??
-
09-26-2006, 02:31 AM #2
- Join Date
- Sep 2006
- Location
- Louisville, Ky
- Posts
- 18
I suggest a P-Trim .85 A/R exhaust housing.
-
10-07-2006, 10:12 PM #3
Since you have that much money to spend don't do the rear mount. You can get a single or twin under hood for $5,000 O.F.I. or Gen TT.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
STS/Rear mount oil system
By JoshuaGrooms83 in forum Forced InductionReplies: 3Last Post: 11-17-2011, 11:20 AM -
Done with the Rear Mount Turbo!
By cailey37 in forum Forced InductionReplies: 23Last Post: 09-07-2011, 09:40 AM -
holset hx35 on custom rear mount???
By krazykarl454 in forum Forced InductionReplies: 13Last Post: 02-02-2009, 10:04 AM -
Rear Mount Turbo in the 7's
By JD_Z28 in forum Multimedia SectionReplies: 11Last Post: 09-13-2006, 12:19 PM
Members who have read this thread: 0
There are no members to list at the moment.
Bookmarks