Results 1 to 11 of 11

Garrett Turbo Identification Help!!

This is a discussion on Garrett Turbo Identification Help!! within the Forced Induction forums, part of the LSx Technical Help Section category; Hey guys! Running into a few problems with my single rear mount project. Why I found a very clean Garrett ...

  1. #1
    Junior Member
    Join Date
    Apr 2012
    Location
    Weatherford Texas
    Posts
    12

    Gold
    1984

    Garrett Turbo Identification Help!!

    Hey guys!

    Running into a few problems with my single rear mount project. Why I found a very clean Garrett turbo on Clist and traded away a few pieces of junk for this gem lol. I will put pictures up. I do not see any ID tags! all I see is Garrett m33 2 1/1 A/R .72 on the cold side. Exhaust side has A/R 1.26 and M3, It has shaft play and im working on get a rebuild kit and seals buttt.. I dont know what im working with lol. I sent Turbobygarrett.com a help message but still no message back. I pulled the math skills out and figured the cold side is 63.5mm "give or take a little" and exhaust is 82.042 "give or take" ran the math problem and came up with a 76 trim. sounds right and looks right.

  2. #2
    Junior Member
    Join Date
    Apr 2012
    Location
    Weatherford Texas
    Posts
    12

    Gold
    1984

    Quote Originally Posted by BoostedS10 View Post
    Hey guys!

    Running into a few problems with my single rear mount project. Why I found a very clean Garrett turbo on Clist and traded away a few pieces of junk for this gem lol. I will put pictures up. I do not see any ID tags! all I see is Garrett m33 2 1/1 A/R .72 on the cold side. Exhaust side has A/R 1.26 and M3, It has shaft play and im working on get a rebuild kit and seals buttt.. I dont know what im working with lol. I sent Turbobygarrett.com a help message but still no message back. I pulled the math skills out and figured the cold side is 63.5mm "give or take a little" and exhaust is 82.042 "give or take" ran the math problem and came up with a 76 trim. sounds right and looks right.
    I guess I'm not that smart, haha I cant seem to master the url image set up you guys work with? Posted it up in ls1's facebook page.
    https://www.facebook.com/#!/groups/120579357974802/

  3. #3
    Junior Member
    Join Date
    Apr 2012
    Location
    Weatherford Texas
    Posts
    12

    Gold
    1984


  4. #4
    Moderator 35th-ANV-SS's Avatar
    Join Date
    Oct 2008
    Location
    Wherever life takes me
    Posts
    12,465

    Red
    02 35th LE Camaro SS

    You need to use Photobucket or another image hosting site to post pics directly into the thread, Dane. Take the "IMG" code of the picture you want to post and paste it right into the reply box and the picture will post here.

    In order to access the link you posted, you need a FB account, which many people on here probably don't use.

    See if you can't get the pics to work through Photobucket and you'll probably get a lot more responses.

  5. #5
    Junior Member
    Join Date
    Apr 2012
    Location
    Weatherford Texas
    Posts
    12

    Gold
    1984

    Sorry I didnt reply sooner, lots to do and no time to do them lol. I'm going to check photobucket out and hopefully get them posted. Thank you guys!

  6. #6
    Junior Member
    Join Date
    Apr 2012
    Location
    Weatherford Texas
    Posts
    12

    Gold
    1984

    [IMG]<a href="http://s1261.photobucket.com/albums/ii586/BoostedSten/?action=view&amp;current=292.jpg" target="_blank"><img src="http://i1261.photobucket.com/albums/ii586/BoostedSten/292.jpg" border="0" alt="Photobucket"></a>[/IMG]

  7. #7
    ʢ ൧ ൨ ൩ ൪ ൫ ൬ ൭ ൮Ր Ց Ւ Փ Smittro's Avatar
    Join Date
    Feb 2009
    Location
    Pittsburgh
    Posts
    9,965

    White
    2008 Hummer H3

    Here ya go.






  8. #8
    ʢ ൧ ൨ ൩ ൪ ൫ ൬ ൭ ൮Ր Ց Ւ Փ Smittro's Avatar
    Join Date
    Feb 2009
    Location
    Pittsburgh
    Posts
    9,965

    White
    2008 Hummer H3

    Looks like a V-band, but other than that i dunno..

  9. #9
    Junior Member
    Join Date
    Apr 2012
    Location
    Weatherford Texas
    Posts
    12

    Gold
    1984

    Thank you thank you thank you! haha I tried uploading one from Photobucket but it said it was waiting for approval.

    Yeah i've ran every number and mark on the turbo on search engines and even turbobygarrett.com still nothing lol. I'm trying to avoid driving into Dallas or Fort Worth to find a Garrett Tech, but it's looking like i may.

    Its a 4in outlet on the cold side
    and the intlet on the exhaust side is 2.3in height and 1.5 width

  10. #10
    Junior Member
    Join Date
    Apr 2012
    Location
    Weatherford Texas
    Posts
    12

    Gold
    1984

    On another note, For being "used" I'm not finding much carbon build up or discoloring anywhere lol. what little oil is even clean and does not have metal shavings

  11. #11
    Moderator 35th-ANV-SS's Avatar
    Join Date
    Oct 2008
    Location
    Wherever life takes me
    Posts
    12,465

    Red
    02 35th LE Camaro SS

    Here's a number to a distributor in Texas: 800-392-5517 Maybe they can help or lead you to a source that can.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 4.8 and 5.3 identification
    By midnightcamaro in forum GM Trucks
    Replies: 1
    Last Post: 08-19-2008, 11:32 PM
  2. 2 Garrett turbos and 2 35mm wastegates
    By RS_SS69 in forum Parts For Sale / Trade
    Replies: 2
    Last Post: 07-16-2008, 06:51 PM
  3. Garrett T04E 60-1 Trim Turbo off STS System
    By cailey37 in forum Parts For Sale / Trade
    Replies: 10
    Last Post: 10-18-2006, 03:02 PM
  4. FS: Garrett t40b brand new
    By Qwk94Z28 in forum Parts For Sale / Trade
    Replies: 3
    Last Post: 02-26-2006, 08:10 PM
  5. LS1 Identification
    By 9fingergt in forum General Help
    Replies: 2
    Last Post: 10-21-2005, 10:48 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •