Page 2 of 2 FirstFirst 12
Results 21 to 24 of 24

700+ RWHP guys come in !!!

This is a discussion on 700+ RWHP guys come in !!! within the Forced Induction forums, part of the LSx Technical Help Section category; Originally Posted by Rickys S/C Z28 im shooting for the 700s and would like to see what you guys are ...

  1. #21
    Senior Member qwkgto's Avatar
    Join Date
    Mar 2008
    Location
    OHIO"S only 9 second GTO
    Posts
    1,464

    Phantom Black Metalic
    2005 GTO

    Quote Originally Posted by Rickys S/C Z28 View Post
    im shooting for the 700s and would like to see what you guys are doing to get that kinda power?
    turbos I have over 800 to the rear tire on stock ls2,well mostly stock ..look at it this way a twin setup is around what you would have in heads cam and all the other stuff involved.
    mods: custom built twins, built 408 w/l92 stock GM heads,GM matching intake,drag bags,frame ties,aluminum drive shaft, performabuilt 4l80e,Yank converter,ohios fastest and quickest 04-06 GTO 9.52 at 144mph. 1.50 60ft on stock rear end and shafts/suspension,on drag radials.

  2. #22
    Junior Member
    Join Date
    Aug 2005
    Location
    Cali
    Age
    45
    Posts
    37

    Black
    00 SS camaro

    I'm doing it with a tubular header single turbo kit and a TC-76MPS turbo from forced inductions and a 3" exhaust back to a magnaflow catback. Of course ported heads and cam and forged shortblock are all included. Car makes 700 rwhp on only 12 lbs of boost. No meth just 91 octane pump gas.
    00 Tpl Blk SS full BMR susp,Qa1 coil overs, Forgeline wheels,forged 348 with Street Killer Kit and Tc76MPS 600 rwhp @ 9 PSI.

  3. #23
    Member BLACKNIGHT03Z06's Avatar
    Join Date
    May 2006
    Location
    Georgia
    Age
    49
    Posts
    169

    Red
    2002 Z06 Corvette

    Quote Originally Posted by vaticano View Post
    I need a new clutch and was looking at the Spec Twin Disk, What do you think of it?
    I have read a few negative reports on this clutch on the Z06VETTE.com forum but I guess opinions will vary. I had a Spec Stage III plus on my last Z06 w/forged 346ci and ATI Procharger at 14lbs of boost. I went with a conservative tune and only put 695 to the rear. Clutch held up just fine though so I have a high opinion of Spec. The twin disc should be a good choice but I have no experience with that particular set up.
    02' Z06 EB/EB 4.6K miles, Longtubes, Off-road X, Pypes X-back, Blackwing CAI, Comp. Cam 238/240-.605/.609-112LSA, Comp. Beehive Springs, Comp. Titanium Retainers, Comp. Perf. Push Rods, Comp. Billet Double Roller Timing Chain, Hurst Short Throw, Cray 19"/20" w/ Toyo Proxes4 265/30/19's & 295/30/20's

  4. #24
    Member Rickys S/C Z28's Avatar
    Join Date
    Nov 2005
    Location
    morehead KY
    Age
    36
    Posts
    844

    a red 1 and a silver 1
    1993,2000 z28

    well guys im still trying to get everything worked out but i think 700 is a bit hi for what i have as on know but we will see after the first of the year

Page 2 of 2 FirstFirst 12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Question: 500 rwhp
    By 383ls6 in forum Internal Engine
    Replies: 24
    Last Post: 04-19-2013, 09:10 AM
  2. Question: How much rwhp
    By TransAmFanatic in forum General Help
    Replies: 8
    Last Post: 01-08-2009, 12:36 PM
  3. LS1 Guys are on Defense Mustang Guys on Offense
    By Sarge in forum Almost Anything Goes
    Replies: 36
    Last Post: 06-06-2008, 09:09 AM
  4. 550 RWHP 383 Z06 VS 770 RWHP Supra MKIV
    By LS1 RX7 in forum Kill Stories
    Replies: 6
    Last Post: 02-02-2007, 05:47 PM
  5. Young Guys Step In (Old Guys Can Too)
    By Mr. CarelessAndImprudent in forum Almost Anything Goes
    Replies: 16
    Last Post: 02-28-2006, 05:33 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •