Nitrous nozzle in rubber bellow??

**WS6chick** · 10-04-2009, 07:54 PM

I recently put the nitrous kit on, but I'm not liking the nozzle in the rubber bellow. Other than buying the NX custom version of it, where can I find the plastic/silicon bellow to put the nozzle in?

**346ci** · 10-10-2009, 12:00 AM

You mean like this?

If so you can find ls1 smooth bellows on ebay for around $35. SLP also sells them for $65, but the ebay ones seem to be the exact same thing. You could try using a Fernco coupler from home depot, I know a lot of guys got it to work, but I couldn't get it to fit nicely on my car.

**WS6chick** · 10-11-2009, 05:14 PM

I like your setup! That looks much better than the accordion one I have lol. Yeah something like that, its not flexible right? I'm worried about leakage due to the flexibility of the bellow I have. I sealed it with rtv but I'm still thinking it might be better to just switch the bellow out.

**joedude02** · 10-12-2009, 12:03 PM

Originally Posted by 346ci

If so you can find ls1 smooth bellows on ebay for around $35. SLP also sells them for $65, but the ebay ones seem to be the exact same thing. You could try using a Fernco coupler from home depot, I know a lot of guys got it to work, but I couldn't get it to fit nicely on my car.

it's a PITA, but it works. the buddy tool helps out alot on this mod. have someone hold it as you position it.

**WS6chick** · 10-15-2009, 04:27 PM

Thanks!! I ended up getting the SLP one off ebay for $40. After seeing yours it looks waaaaaay better than the cheesy accordion style lol

**346ci** · 10-15-2009, 07:02 PM

The SLP one does flex, but it's stiffer than the stock one and should hold the nozzle better.. The picture isn't my engine bay, wish mine was as clean as that one

**WS6chick** · 10-15-2009, 07:13 PM

Yeah, no matter what I do my engine bay looks like @ss lol. The SLP bellow doesnt look like the one in the pic, is the one in the pic more stiff than the SLP one?

**99_Z28** · 10-29-2009, 04:43 AM

I drilled and tapped my maf were the clamp goes. Gives it a nice sturdy mount.

**WS6chick** · 10-29-2009, 11:21 AM

Originally Posted by 99_Z28

I drilled and tapped my maf were the clamp goes. Gives it a nice sturdy mount.

Wow right into the MAF? Got pics?

**ls1camino** · 10-29-2009, 12:51 PM

Originally Posted by WS6chick

Wow right into the MAF? Got pics?

I run MAFless, so I bought this and use it in my Silicone Tube. Dab of RTV silicone on the threads holds everything from turning in place.

http://www.nitrousoutlet.com/catalog...&product=3783#