NITROUS info help

[stefos]

I am installing a new zex dry kit they say its the best dry kit for LT1's for my 95 trans am replacing the wet system, the directions say to place the nitrous spray nozzle after the maf sensor to the throttle body not in front of maf or it will damage maf.I have read here on some posts to put it before the maf..should i stick with the manufactureres instructions? Its for the zex dry system for LT1's dry kit anybody have one? Any help would be very much appreciated too ! thank you everyone

[SHovV]

i would stick with the manufactureres instructions. or call 'em too

[LS2Tuner]

Follow supplied instructions!!

[Nick@HSW]

Your fuel pressure regulator will have a pressure reference hose hooked up to it from the zex unit. This will increase your fuel pressure in the lines thus compensating for the higher fuel demand. When using this, you need to have the nozzle after the maf sensor.

Nick