Results 1 to 12 of 12

New Product!!! Progressive Nitrous Controller

This is a discussion on New Product!!! Progressive Nitrous Controller within the Nitrous forums, part of the LSx Technical Help Section category; Hey guys, check out our new progressive controller. It's got a pretty good base feature set at a nice price ...

  1. #1
    Member
    Join Date
    Aug 2005
    Location
    Warminster, PA
    Posts
    227

    New Product!!! Progressive Nitrous Controller








    Hey guys, check out our new progressive controller. It's got a pretty good base feature set at a nice price point; $299.99. We're going to do an Introductory Price of $279.99 until we start shipping; which is aprox 9/30/05. They are finishing up in manufacturing now and then they just have to be packaged. Follow this link for more info:

    The HSW Edge Progressive Nitrous Controller

    Let me know if there are any questions.

    Thanks,
    Matt

  2. #2
    Its getting Hot!! smokenssz's Avatar
    Join Date
    Jan 2001
    Location
    College Station,TEXAS
    Age
    34
    Posts
    330
    07 CBR1000RR

    Thats sweet! I didnt have that when I put my N2O kit in my car

  3. #3
    Member
    Join Date
    Aug 2005
    Location
    Warminster, PA
    Posts
    227


    Here's a few screen grabs of the LCD screen on The Edge. Below is a video (right click and save as) of The Edge in use. The audio cuts in and out a bit and I shouldn't of even tried doing any hand held shooting, but I guess that's why I'm not in video production LOL. The two LEDs light flash when the unit is pulsing the solenoids and go solid when the build time is over.

    The Edge Demo Video (Right Click and Save Target As)

    The video is a little more then 4 megs.

    Matt

  4. #4
    Sonoma GT w/416 L92/T56 HotRodV6's Avatar
    Join Date
    Sep 2005
    Location
    Humble Tx 77396
    Age
    42
    Posts
    56

    Black
    1992 GMC Sonoma GT

    That is a sweet deal for everything this does, can you tell me the overall dimensions of the unit itself?

    Also does it have a wiring harness itself, or do you have the screw plates for the wires like other controllers on the market?

    Thanks

    EDIT: Just got the Dimensions and figured id post them up for anyone else in case you were wondering also.

    4.5x2.5x1.25 and it has 2 buttons on the bottom that you have to have access to to program the unit.

    Thanks for the info and i will be ordering mine very soon. Also they said they are about a week behind in shipping due to demand.
    Last edited by HotRodV6; 10-03-2005 at 08:59 PM.

  5. #5
    pushrods
    Guest
    Hotrod did you finish the direct port on the cavalier yet?

  6. #6
    Sonoma GT w/416 L92/T56 HotRodV6's Avatar
    Join Date
    Sep 2005
    Location
    Humble Tx 77396
    Age
    42
    Posts
    56

    Black
    1992 GMC Sonoma GT

    Quote Originally Posted by pushrods
    Hotrod did you finish the direct port on the cavalier yet?
    No not yet, but im working on it. Should be done plumbing the intake this week, and then i still need to get the purge setup and run the new fuel and N20 lines from the trunk, and get a fuel pump and regulator and get the fuel cell mounted, then its time to fill the bottle and see what happens.

  7. #7
    Member
    Join Date
    Aug 2005
    Location
    Warminster, PA
    Posts
    227
    Good luck with everything! And just an update, we're all caught up on The Edge controllers. They are shipping the same day you place your order.

    Matt


    Quote Originally Posted by HotRodV6
    No not yet, but im working on it. Should be done plumbing the intake this week, and then i still need to get the purge setup and run the new fuel and N20 lines from the trunk, and get a fuel pump and regulator and get the fuel cell mounted, then its time to fill the bottle and see what happens.

  8. #8
    pushrods
    Guest
    ^^ Good to know I am just egar to see how it turns out. I was looking under the hood of the cavalier when i was changing jets and by the way things look, I will probably install it on the under-side of the intake manifold. How are you running it? does the fuel rail and injectors get in the way?

    Later,
    Jeff

  9. #9
    Junior Member TROUBLE's Avatar
    Join Date
    Jul 2005
    Location
    South Florida
    Age
    39
    Posts
    24

    Monteray Maroon
    2001 Z28

    Where are you guys located?

  10. #10
    Member
    Join Date
    Aug 2005
    Location
    Warminster, PA
    Posts
    227
    Us? If yes, Drexel Hill, PA, about 10 mins out of Philly.

    Matt

    Quote Originally Posted by TROUBLE
    Where are you guys located?

  11. #11
    pushrods
    Guest
    If your talking to me then chicago subburbs

  12. #12
    Sonoma GT w/416 L92/T56 HotRodV6's Avatar
    Join Date
    Sep 2005
    Location
    Humble Tx 77396
    Age
    42
    Posts
    56

    Black
    1992 GMC Sonoma GT

    and im in Houston Tx.

    Mine will be on the underside of the intake as well, and no the injectors and fuel rail wont be in the way. I thought about switching from the edelbrock E2 nozzles that cam with my kit to some of the nozzles that fit under the injector, but they are almost 50 bucks each and i dont want to spend another 200 bucks.

    and i still dont have the system plumbed, i coulnt find a 1/16 NPT tap anywhere in town so i had to order one. Next week it will be done. Stay tuned on J-body.org for all the pics, i dont want to whore out this thread anymore.

    Also ill be ordering my Edge very soon, cant wait to see how it does.
    1992 GMC Sonoma GT #492 of 806 built.
    Under Full Resto w/433 E85 L92/4L80E.

    1992 GMC Typhoon #1104 of 2200 built.
    Broken Crankshaft. New Engine Soon.

    2000 Olds Bravada
    Bagged 2wd Frame Swap
    L31 swap Planned
    Daily Driver

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. HSW Nitrous controller
    By Blue_01_Z28 in forum Nitrous
    Replies: 8
    Last Post: 04-18-2011, 10:12 AM
  2. NOS progressive controller
    By mrr23 in forum Nitrous
    Replies: 0
    Last Post: 01-27-2007, 09:48 PM
  3. 3.62 Crank, TNT F1/2, NW 90mm C5 TB, Schnitz Progressive Controller....
    By Phil99vette in forum Parts For Sale / Trade
    Replies: 1
    Last Post: 01-17-2006, 08:38 PM
  4. Replies: 0
    Last Post: 01-16-2006, 11:00 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •