My NX install and purge video

**Corvettekid82** · 05-19-2009, 06:01 PM

NX wet kit set up with bottle opener, pressure regulated heater, and Nitrous Outlet's Digital Window Switch, center console switch mount w/ gauge (looking for an electric N20 gauge to fill the void) and single nozzle. Jetted for 125 to start out. FPSS & Filter for safety. Running Fuel pressure, A/F and Trans temp gauges in the A-pillar. Eventually want to get a wide band in place of the narrow:bang:

Everything is hidden except for the noids.. Bottle, heater and opener in the spare tire area and the window switch and relay mounted behind the glove box. Whaddaya think? Any suggestions? PS the gauges were not fully hooked up for pics, just gives you the idea of how they work, FP never reached 100+. It stays a solid 60# and full throttle it goes 55#.

Just put in some TR6's and ready to spray it any time now, if it stops raining.

Big thanks to MnypitZ for the help with the install.

**totalkos** · 05-19-2009, 08:02 PM

lets see some pics of the bottle mounting!

love the purge

**2MuchFun** · 05-19-2009, 08:10 PM

badass car man!

**346ci** · 05-19-2009, 09:35 PM

looking good, anxious to see how it runs

**mrr23** · 05-20-2009, 04:22 AM

very nice work as usual.

**99_Z28** · 05-20-2009, 07:34 AM

Clean motor bay.

**WS6chick** · 06-16-2009, 06:09 AM

Originally Posted by Corvettekid82

NX wet kit set up with bottle opener, pressure regulated heater, and Nitrous Outlet's Digital Window Switch, center console switch mount w/ gauge (looking for an electric N20 gauge to fill the void) and single nozzle. Jetted for 125 to start out. FPSS & Filter for safety. Running Fuel pressure, A/F and Trans temp gauges in the A-pillar. Eventually want to get a wide band in place of the narrow:bang:

Everything is hidden except for the noids.. Bottle, heater and opener in the spare tire area and the window switch and relay mounted behind the glove box. Whaddaya think? Any suggestions? PS the gauges were not fully hooked up for pics, just gives you the idea of how they work, FP never reached 100+. It stays a solid 60# and full throttle it goes 55#.

Just put in some TR6's and ready to spray it any time now, if it stops raining.

Big thanks to MnypitZ for the help with the install.

NICE!!! Just got the same NX kit (minus the purge) and about to install on my TA with the all-in-one solenoid bracket from Nitrous Outlet. Any tips or suggestions for kit install?

**02Sweet** · 06-16-2009, 06:19 AM

Looks like a very clean install!!

how much does that set you back for everything you got so far?

**tegaman111** · 06-16-2009, 09:25 AM

very nice and clean install. don't scare anybody walking in front of your car!!! lol!!

**Corvettekid82** · 06-16-2009, 09:13 PM

Originally Posted by WS6chick

NICE!!! Just got the same NX kit (minus the purge) and about to install on my TA with the all-in-one solenoid bracket from Nitrous Outlet. Any tips or suggestions for kit install?

Congrats on the kit.. I had mine for almost a year before installing it and even when I did I tackeled it in pieces. Plan everything out so if you decide to hide all the wires and feed line under the carpet/panels you will only have to do it once. Take your time and it should be a pretty painless install. Nitrous outlet makes some great pieces. I dont have their bracket (which looks bad ass, btw) but I have their console switch panel. Oh and remember to use the basic saftey precautions, like tapeing off the ends of the AN lines when you run them to make sure you're not getting dirt/junk in there and a nitrous filter.

Originally Posted by 02Sweet

Looks like a very clean install!!

how much does that set you back for everything you got so far?

I've picked up most of the stuff 2nd hand and had a total of 2 complete kits...., things I didnt use I parted out to offset cost. Off the top of my head.. my guess I'm out around 400 for the gauges and pod (all new) and about 400 for the kit w/ purge, auto bottle heater, fpss and digital window switch *after selling off the other extras*, 100 for the bottle opener and about another 100 bucks in the switch panel & bottle hardware/mounts.
About 1000 total.

If you were to buy the same stuff new:
gauges ~ 400
kit with upgraded noids ~ 750
purge ~ 125
auto bottle heater ~ 240
window switch ~ 110
switch panel ~ 80
bottle opener ~ 260
and all the little safety stuff ~ 60
$2025

**02Sweet** · 06-17-2009, 03:18 AM

1000 seems like a great price for a setup that you got congrats

Thread: My NX install and purge video

Thread Tools