Maybe a dumb question

**jcaldwell** · 08-16-2006, 07:26 PM

I just bought a 10lb bottle for my car (I bought the car with everything already installed just minus the bottle) and I was putting it in place just to transpot it since it's empty and I'm not going to use it anytime soon and just looking at it it looked like my feed line was too small for the bottle. Do the bottle outlets come in different sizes? Is there some trick to hooking the line up? If I did get the wrong size do they make adapters or am I just SOL? Thanks.

Jeff

**Matt@HSW** · 08-18-2006, 06:29 AM

There should be a bottle nut on the valve of your bottle. Then the main feed line is hooked up to the end of the bottle nut. Sounds like yours may not have one?

Matt

Originally Posted by jcaldwell

I just bought a 10lb bottle for my car (I bought the car with everything already installed just minus the bottle) and I was putting it in place just to transpot it since it's empty and I'm not going to use it anytime soon and just looking at it it looked like my feed line was too small for the bottle. Do the bottle outlets come in different sizes? Is there some trick to hooking the line up? If I did get the wrong size do they make adapters or am I just SOL? Thanks.

Jeff

**mrr23** · 08-19-2006, 05:31 PM

yes, you are missing the bottle nut adapter. there are two kinds of bottle nut adapters. what brand bottle do you have?

**jcaldwell** · 08-22-2006, 01:17 PM

its NOS

**srsnow** · 08-22-2006, 02:02 PM

16220 NOS if it is a -4 line and 16230 NOS if its a -6 line. If you can't get those then any 660 adapter in either -4 or -6 will fit depending on your line size