Help nitrous won't spray

[Sworaz]

Can't seem to get this NO2 kit working....
My window switch is a Nitrous Daves stage 2 (thought it was a dynotune) and I think it's what's keeping the No2 from spraying. When I have the nitrous/window switch On it says 0L0
In run mode, the LEDs (A.B.C.)will show the unit’s status.
A = throttle position activation switch status [0 = OFF / 1 = ON]
B = gear lock out for channel 1 [0 = feature OFF / L = locked out]
C = gear lock out for channel 2 [0 = feature OFF / L = locked out]

That means my TPAS is off
I'm locked out of stage 1
and stage 2 is off .................is that right? Should it be different?
The purge works, as well as the bottle heater. When I go wot nothing happens. ? Help
__________________

[mrr23]

you mean the one that trick performance parts sells to retailers and they put their sticker on it? does it look like this one? if so, i use it.




here's the instructions for it
http://www.trickperformanceproducts....structions.htm

make sure in step one that you have it set to number 4. LS1 ignition sends a rpm signal like a four cylinder motor does.

what the display is telling you when it reads 000 is this

first 0 means no TPS signal activation is being used or hasn't achieved the reference voltage to turn on
second 0 means you have no gear lockout selected for stage one.
third 0 means you have no gear lockout selected for stage 2.