Custom 2 stage dry kit with write up and " Pics"

**maxwax** · 07-15-2009, 05:05 PM

I wanted to go at my next project a little differently so a top of me having a 5.3 engine with a Zo6 cam ,springs ,and intake with full length slp headers,A 4L65 Trans, and a 4.10 gear, I added a nitrous dry kit .

I formerly used this kit as a wet kit on my 2002 z28 , I had an extra nos solenoid, and this is my result, I have yet to use it at the track , but on my Drag radials on the street it is a deadly combo.

First things first.....

Here is the bottle configuration, I did not want a 2 bottle set up, because they take up too much space, so I fabbed this up.

I had a 6an line off of an old cheater system, which I use for the larger shot of the two, and a 4an line for the smaller shot.

Next comes the solenoids and nozzle, I wondered if the wet kit nozzle would work with dual N2O shot instead of N2O and Fuel... The answer is Hell yes.

Now for arming and activation, the first and main shot is armed bay a standard toggle ,and activated via a micro switch at WOT, to the untrained eye it still looks like a single stage wet kit, other than the fact that you don't spray fuel through the mass air.

That being said ,I tried to make the second stage a little more stealthy, here is where the second stage comes in,What appears to be a cell phone charger that has been hard wired in is actually a momentary activation switch.

Here is the cord..

here is the hook up..

Here it is where it goes..

And this is how it works..

Any input Good or bad is wanted....

so what do you think.