Results 1 to 12 of 12
Thread: corvette no2 questions
-
02-20-2006, 04:37 PM #1
- Join Date
- Jan 2006
- Location
- illinois
- Age
- 42
- Posts
- 106
torch red- 99 c5
corvette no2 questions
hey everyone i have a 99 corvette with an auto trans 3.42 gears twin flo cold air intake tri flor short tube headers q tec electronic cutouts removed catalytic converters. tri flow cat back system. custom computer tuning by steve kohl t.t.s power systems. 160 thermostat and all the little mods coolant by pass iac relocater etc.... anyways my question is i just purchased a t.n.t wet kit with a window switch. delay box. purge system bottle heater and all the goodies. my question is what do i need to do? is there tuning that needs to be involved? and do i need to change the plugs? .. any advice would help.
-
02-20-2006, 04:56 PM #2
- Join Date
- Aug 2005
- Location
- Texas Department of Corrections
- Posts
- 18,128
- Retired Outlaw Sum Bitch
Go one range colder on plugs.....under a 150 shot your good to go...I will caution you ....be watchful/aware of your fuel pressure....never "hit it" when your bottle pressure is under 900lbs....other than that....your good man....
-
02-20-2006, 06:10 PM #3
- Join Date
- Aug 2005
- Location
- Warminster, PA
- Posts
- 227
For the WOT switch you'll either have to bend the bracket and install it under the gas pedal or use a TPS switch, like the trigger, as you have a fly by wire throttle body.
Matt
-
02-21-2006, 04:13 PM #4
- Join Date
- Jan 2006
- Location
- illinois
- Age
- 42
- Posts
- 106
torch red- 99 c5
about the no2 vette
what plugs should i use? do you recommend any? and is there any tuning?... i bought the kit off of a friends friend who had it on a zo6.. so i dont think i should have to change the bracket? one more question my kit came with a delay timer.... can someone explain why i need this?
Last edited by c5andtyphoon; 02-21-2006 at 04:15 PM.
-
02-21-2006, 06:12 PM #5
- Join Date
- Aug 2005
- Location
- Warminster, PA
- Posts
- 227
Most guys run NGK TR6s. If you have advanced timing any via a PCM tune you'll want to retard it. The delay timer will delay the nitrous activation. So say you set it for 1 second. The system is armed and you go wot, the N2O won't engage for 1 second. It's to help with traction issues.
Matt
Originally Posted by c5andtyphoon
-
02-23-2006, 03:09 PM #6
- Join Date
- Aug 2005
- Location
- EL PASO TX.
- Age
- 48
- Posts
- 112
RED- 1998 CAMARO Z28
Avoid Platinium Plugs Get The Ngk Tr6 1 Or 2 Degrees Colder Or Iridiums Same Degrees Lower And If You Have A Power Programer Installed Get A Retard Sistem , Dont Use It Above 3000 Rpm And When The Car Its Gonna Shift (you Might Blow The Tranny)
-
02-23-2006, 04:16 PM #7
- Join Date
- Jan 2006
- Location
- illinois
- Age
- 42
- Posts
- 106
torch red- 99 c5
what do you mean dont use the nitrous above 3000 rpm?? aint that when you are supposed to use it?... and i have a window switch set for between 3000 and 6000 rpm... i have an automatic trans.. also my computer was tuned by steve kohl... so i dont know what is exactly done?... even with a wet system you need to mess with the tuning?
-
02-24-2006, 10:26 AM #8
- Join Date
- Aug 2005
- Location
- EL PASO TX.
- Age
- 48
- Posts
- 112
RED- 1998 CAMARO Z28
Sorry I Mean Under 3000 Rpm
The Kit Supouse To Fit And Work With Stock Engine And Ecu Program
-
02-24-2006, 08:01 PM #9
- Join Date
- Jan 2006
- Location
- illinois
- Age
- 42
- Posts
- 106
torch red- 99 c5
thats the problem i dont have the stock ecu?? it was tuned by steve kohl..
-
02-24-2006, 08:02 PM #10
- Join Date
- Jan 2006
- Location
- illinois
- Age
- 42
- Posts
- 106
torch red- 99 c5
also.. with all my other mods i was running like a 13.1 - 13.2 with a full subwoofers and everything.. at 106 mph.. my 60' times were 1.8 to 1.9's with 315/35 bfg kdw drag radials...... how much quicker will the car be with the 100 shot?
-
02-25-2006, 03:22 AM #11
- Join Date
- Aug 2005
- Location
- Texas Department of Corrections
- Posts
- 18,128
- Retired Outlaw Sum Bitch
100 shot will get you the 12's for sure...
-
02-25-2006, 12:50 PM #12Originally Posted by c5andtyphoon1997 Firebird 3.8L
A4,WS6 Ram Air Hood, Edelbrock Catback, SLP CAI, 85 Dry Shot
1981 Firebird Trans Am
http://members.cardomain.com/dreaded_hope
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Upgrading intake on a stock LS1, questions, questions.......
By mrbvlo in forum External EngineReplies: 6Last Post: 12-30-2011, 11:40 AM -
Corvette Fuel Octane - Burning Questions
By Ed Blown Vert in forum CorvetteReplies: 0Last Post: 04-23-2008, 01:13 AM -
Corvette Fuel Octane - Burning Questions
By Ed Blown Vert in forum CorvetteReplies: 0Last Post: 04-23-2008, 01:01 AM -
Corvette Fuel Octane - Burning Questions
By Ed Blown Vert in forum CorvetteReplies: 0Last Post: 04-23-2008, 12:51 AM -
Just got my corvette! and already questions
By cujo in forum General HelpReplies: 2Last Post: 03-05-2006, 07:26 PM
Bookmarks