Results 1 to 10 of 10

Cold fusion nitrous fuel cell

This is a discussion on Cold fusion nitrous fuel cell within the Nitrous forums, part of the LSx Technical Help Section category; Has anyone used the cold fusion nitrous fuel cell kit that mounts up font in the engine compartment. If so ...

  1. #1
    Got Juice? Nasty TA's Avatar
    Join Date
    May 2006
    Location
    Knoxville, TN
    Age
    36
    Posts
    441

    Silver
    2002 Trans Am WS6

    Cold fusion nitrous fuel cell

    Has anyone used the cold fusion nitrous fuel cell kit that mounts up font in the engine compartment. If so can you post some pics and if it it worth 512.00 or not. Planing on buying one and need some feedback. Thanks


  2. #2
    Just another Joe Eagle's Avatar
    Join Date
    Mar 2007
    Location
    NW Chitown
    Posts
    757

    Pewter
    2002 WS6

    I think you might be looking at the wrong thing... thats a fuel system... not a nitrous setup...

    http://www.nitrouspowered.com/Fuel-Systems-s/95.htm

  3. #3
    Got Juice? Nasty TA's Avatar
    Join Date
    May 2006
    Location
    Knoxville, TN
    Age
    36
    Posts
    441

    Silver
    2002 Trans Am WS6

    I know its not a nitrous setup. You showed me the exact same thing. It is the fuel cell, pump and regualtor for a wet nitrous kit for a stand alone fuel supply for an wet nitorus kit. I just want to know if anyone has used it and if so i would like to see how its mounted. They say that it fits without removing anything in the engine compartment and it mounts on the driver side. I want the set up so i can run 100 unleaded race gas when i spray.

  4. #4
    Just another Joe Eagle's Avatar
    Join Date
    Mar 2007
    Location
    NW Chitown
    Posts
    757

    Pewter
    2002 WS6

    It just seems a bit over the top... seeing as the rating is for spraying 1000HP multi stage nitrous setups...

  5. #5
    Junior Member
    Join Date
    Jun 2007
    Location
    usa
    Posts
    15
    96 trans-am

    Quote Originally Posted by Eagle View Post
    It just seems a bit over the top... seeing as the rating is for spraying 1000HP multi stage nitrous setups...
    i think it's a great idea...it's always good to have a stand alone system so you don't have to depend on your fuel sysytem to run your car and your nitrous

  6. #6
    Got Juice? Nasty TA's Avatar
    Join Date
    May 2006
    Location
    Knoxville, TN
    Age
    36
    Posts
    441

    Silver
    2002 Trans Am WS6

    Quote Originally Posted by gen3ls1 View Post
    i think it's a great idea...it's always good to have a stand alone system so you don't have to depend on your fuel sysytem to run your car and your nitrous
    I also agree that why i want ot get it. Even though i already have a walbro 255 pump, i don't want to put that much strain on it because i'm spraying a 200 shot on it on a built forged motor. My friend saw a guy runnig this set up with a 200 shot run in the high 9's on the same set up as i have so it will be worth it in my opinion. Plus that just one more polished piece for under the hood.

  7. #7
    Junior Member Rocketwheels's Avatar
    Join Date
    Jun 2007
    Location
    United States
    Posts
    3
    I was thinking about buying that, I got my current system from NitrousDirect.com they were very helpful and gave me the bets price, I don't know anything about the fuel systems though, i need help in that department too

  8. #8
    I'm out there so hide!!!! D!ck's Avatar
    Join Date
    Oct 2005
    Location
    TULSA, OK
    Posts
    1,140

    Black & Brilliant Silver
    1999&1997 SL600 6.0 V12's

    I got my wet kit from Cold Fusion Nitrous Systems.


    http://www.coldfusionnitrous.com/

    wish i still had the guys cell# I'd hook up with Mick, he's the Man!!

  9. #9
    Nitrous Tuner LS2Tuner's Avatar
    Join Date
    Aug 2006
    Location
    WestCoast AZ-CALI
    Posts
    4,763

    Silver
    05 Goat SMASHED

    That is pretty expensive....I think
    All it is is a gallon fuel cell you can get on Ebay for $115. A "cheap" Holley style fuel pump thats louder than a diesel truck.... A $120 from Summit with the regulator. A few fittings......$50-60. A generic Bosch style relay $5,Relay pigtail $2 A few butt connectors....$4.3 pre-made lines at $20-$30 each.
    Not to mention the fittings in the pic don't make sense. Your goal in plumbing ANY fuel system is to stay away from 90's they are restrictions...EVERY FITTING IS A 90 EVERY WHERE!!! NOT TO MENTION THEY ARE THE MOST EXPENSIVE.
    Then there is a 3/8" npt -6 90 fitting on the regulator and then it has a female cap on it....... Just put a 3/8"npt plug in the regulator.
    Anyways there is some knowledgeable feed back for you.
    Don't be afraid of the bottle!!! Be afraid of your tune!!!

  10. #10
    Blown and Stroked TNTramair's Avatar
    Join Date
    Aug 2005
    Location
    philly
    Posts
    353

    red
    2000 trans am ws.6

    another option for you....fits a little cleaner and the welds look much better too. . its worth the price differance.




    link to more info...


    http://www.harrisspeedworks.com/shop/home.php?cat=373

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Summit Racing 3 Gallon Fuel Cell NEW
    By Hodgesz28 in forum Parts For Sale / Trade
    Replies: 0
    Last Post: 10-18-2008, 05:29 AM
  2. cold fusion nitrous?
    By blackz28ls1 in forum Nitrous
    Replies: 14
    Last Post: 03-19-2008, 07:39 PM
  3. nitrous wet shot with fuel cell
    By jimmybling31 in forum Nitrous
    Replies: 4
    Last Post: 02-18-2008, 12:11 AM
  4. new cold fusion nitrous kit!!!
    By blackls1ta in forum Parts For Sale / Trade
    Replies: 2
    Last Post: 10-04-2007, 05:40 PM
  5. Fuel cell, do you recognize this?
    By boosted255 in forum General Help
    Replies: 1
    Last Post: 08-26-2007, 06:31 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •