Page 1 of 2 12 LastLast
Results 1 to 20 of 26

best kit..

This is a discussion on best kit.. within the Nitrous forums, part of the LSx Technical Help Section category; most of you have seen what i am trying to build w/ a forged bottom end ls1 w/ heads/ and ...

  1. #1
    Member
    Join Date
    Apr 2008
    Location
    allenhurst GA
    Posts
    306

    black
    99 formula firebird

    best kit..

    most of you have seen what i am trying to build w/ a forged bottom end ls1 w/ heads/ and cam pkg...what i am trying to figure out is how much spray i can run..i want to run a 200 shot ..maby a 250....but not sure what brand? which kind of system? or much about them..i would love to know who has what? and how well it works? tunability issues/performance? to the ground hp/tq...if a 150 kit give you 150 to the wheels? wet/ dry? which ones gives the most? again thanks for your time...

  2. #2
    Awaiting Activation
    Join Date
    Aug 2007
    Location
    odessa,texas
    Posts
    1,056

    69 hugger orange
    98 z28

    nitrous express makes a few different kits that would fit your application and they make a good product

    as for the power,some of the kits are pretty much on the money rwhp you just have to see what is rated at the rear and what is rated at crank power
    nitrous express and zex are rated at the rear wheel

  3. #3
    Member
    Join Date
    Apr 2008
    Location
    allenhurst GA
    Posts
    306

    black
    99 formula firebird

    so either nitrous express or zex then? is TNT any better? worse?

  4. #4
    Member cailey37's Avatar
    Join Date
    Mar 2006
    Location
    Mississippi
    Posts
    832

    Silver
    1998 Pontiac Trans Am

    Probably the best out there in my opinion:

    http://news.hspn.com/articles/1309/1...ion/Page1.html

  5. #5
    Approver of Threads SpecterGT260's Avatar
    Join Date
    Dec 2006
    Location
    Iowa
    Posts
    205

    Blacked out
    '98 Trans Am

    I run NX, they have good quality.

    however, TNT, venom, and even NOS are all good systems. for higher hp applications i wouldnt do ZEX, its more of a starter kit.

  6. #6
    Junior Member
    Join Date
    Jun 2008
    Location
    lincoln ne
    Posts
    33

    red
    1998 trans am

    i have a nos wet plate kit and love it... its adjustable up to a 200 shot and was really easy to install... and you can find it on ebay for around $550

  7. #7
    Blown and Stroked TNTramair's Avatar
    Join Date
    Aug 2005
    Location
    philly
    Posts
    353

    red
    2000 trans am ws.6

    www.harrisspeedworks.com

    i invite you to check out some of our kits and feel free to run a search here and the other site for some feed back. our prices are un matched and our products are top notch. let me know if ya have any questions.

  8. #8
    Life in the Fast lane sunsetorangess's Avatar
    Join Date
    Aug 2005
    Location
    Bragg NC
    Posts
    2,835

    Met. Sunset Orange
    01 SS

    +1 on the Harris speed works kits, been running one for two years now, also have a few friends i instailed kits on with no issues. Good price, simple wiring, Fast shipping, great customer service, what else do ya need.
    J
    2001 SS, Its not the car its the Driver that matters....

  9. #9
    Member
    Join Date
    Apr 2008
    Location
    allenhurst GA
    Posts
    306

    black
    99 formula firebird

    will be looking into it a lot more seriously when i get home in about a month!! do you have them on hand? ready to ship complete?

  10. #10
    Blown and Stroked TNTramair's Avatar
    Join Date
    Aug 2005
    Location
    philly
    Posts
    353

    red
    2000 trans am ws.6

    in stock..ready to go.
    2000 WS.6 Trans am M6
    402 W/APS Twin turbos for support...
    1999 Firebird Formula Hardtop M6
    www.cardomain.com/id/twinturboramair

  11. #11
    Nitrous Tuner LS2Tuner's Avatar
    Join Date
    Aug 2006
    Location
    WestCoast AZ-CALI
    Posts
    4,763

    Silver
    05 Goat SMASHED

    Well I will give you my opinion.

    I would invest in a wet plate kit that mounts behind the throttle body.
    There are many good kit's out there now. I usually always use NX'x solenoids. Plate's I have used NOS's,Nitrous Direct's 2 stage,and NX's with good result's.
    As stated already NOS's numbers are flywheel not rear wheel.
    If you are planing on spraying over 200 I would look for a good bottom feed solenoid for the nitrous.


    I still haven't used any of the Harris Speed Works kits so I can't speak first hand but I haven't heard anything bad.

    You need a fuel system that can support the fuel that will be needed without allowing pressure spikes also.

    Don't be afraid of the bottle!!! Be afraid of your tune!!!

  12. #12
    T/A Everyday oreowizard's Avatar
    Join Date
    Nov 2007
    Location
    Charlotte, NC
    Posts
    199

    blue
    98 T/A LS-1

    Quote Originally Posted by TNTramair View Post
    www.harrisspeedworks.com

    i invite you to check out some of our kits and feel free to run a search here and the other site for some feed back. our prices are un matched and our products are top notch. let me know if ya have any questions.


    I might be getting my hands on one of your kits. If so, I may nees some help if the kit isnt complete.

  13. #13
    Member
    Join Date
    Apr 2008
    Location
    allenhurst GA
    Posts
    306

    black
    99 formula firebird

    will my walboro 255 fuel pump work on a 200 wet shot?

  14. #14
    Nitrous Tuner LS2Tuner's Avatar
    Join Date
    Aug 2006
    Location
    WestCoast AZ-CALI
    Posts
    4,763

    Silver
    05 Goat SMASHED

    Quote Originally Posted by QtrWhore View Post
    will my walboro 255 fuel pump work on a 200 wet shot?
    Yes it will. You just need to watch that intail hit to see how much of a pressure spike you see if your still running stock fuel rails with NO accumulator.

  15. #15
    rapter34
    Guest
    do the kits come with detailed instructions? how difficult are they to install?

  16. #16
    Nitrous Tuner LS2Tuner's Avatar
    Join Date
    Aug 2006
    Location
    WestCoast AZ-CALI
    Posts
    4,763

    Silver
    05 Goat SMASHED

    Yes they do. Some are MUCH more user friendly than others. The biggest mistake people make during "home" installs is on the wiring. Weather it's due to OVER crimping,poor grounds,in adequate power source,or NOT using relays.

  17. #17
    Member
    Join Date
    Aug 2005
    Location
    Warminster, PA
    Posts
    227
    Let me know if you have any questions that you need answered! Our unique 360* spray pattern will ensure an equal distribution for all cylinders! I can probably email you a copy of the install instructions so you can see what the install might be like. Thanks.

    Matt

  18. #18
    JMAC Racing WS6ICK's Avatar
    Join Date
    Aug 2005
    Location
    Kentucky
    Posts
    535

    2000 Trans Am WS6 LS6
    2006 GTO LS2

    Email me the install instructions for the LS1 plate kit Matt.

  19. #19
    Member
    Join Date
    Aug 2005
    Location
    Warminster, PA
    Posts
    227
    Sent you an email back.

    thanks,
    Matt

    Quote Originally Posted by WS6ICK View Post
    Email me the install instructions for the LS1 plate kit Matt.

  20. #20
    Member
    Join Date
    Jul 2006
    Location
    Glen Carbon, IL
    Age
    39
    Posts
    397

    Silver
    2000 Camaro SS

    10.97 @ 124 in the summer heat, full interior/full weight car.

    HSW Sudden Impact Dry kit without a jet. Need I say more?

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •