Chevrolet's fire-breathing, Nürburgring-shredding Camaro ZL1 can now be custom configured for your very own garage - at least your virtual ...
  • Ad

  • 2012 Chevrolet Camaro ZL1 configurator burns up the internet



    Chevrolet's fire-breathing, Nürburgring-shredding Camaro ZL1 can now be custom configured for your very own garage - at least your virtual one.

    The 580-horsepower, 6.2-liter V8-powered Chevrolet won't come cheaply, starting at $54,995, and choices are limited. Major options include paint (we're kind of fond of the $325 Rally Yellow scheme shown above, though perhaps it's a little too Transformersque), transmission choice (six-speed manual or automatic), wheel finish, sunroof and faux suede interior bits. Given that this is a small-volume model with serious performance intentions, we're not bothered by the limited decision tree offered by the configurator, and it helps tamp the bottom line down.

    Build your own by checking out the link below, or compare and contrast builds against the ZL1's nemesis, the Ford Shelby Mustang GT500 by checking out the latter's configurator here.2012 Chevrolet Camaro ZL1 configurator burns up the internet originally appeared on Autoblog on Fri, 17 Feb 2012 17:28:00 EST. Please see our terms for use of feeds.
    Permalink | Email this | Comments

    More...
    This article was originally published in forum thread: 2012 Chevrolet Camaro ZL1 configurator burns up the internet started by Ed Blown Vert View original post
  • Recent Forum Posts

    joesurfer

    y pipe

    yeah, after thinking about this, and seeing the possible issues with clearance I'm holding off for now. The roads here on Long Island basically suck and

    joesurfer Today, 07:31 AM Go to last post
    mctabish

    Window is leaking pretty bad:( How can I adjust? Convertible

    I have a 2000 Camaro SS ragtop and the window is leaking around the top between the gasket and the glass.
    I just replaced the regulator and motor

    mctabish Today, 12:13 AM Go to last post
    heath26

    drag radials on a 10 bolt will it hold ?????

    UPDATE: got a pair of m/t ss street drag radials and on the street the car dead hooks. No spin at all after a 3 second burn out to heat them up. I am

    heath26 Yesterday, 10:01 PM Go to last post
    Thedub

    Engine Removal Question

    Hey all,
    I am currently taking on the task of removing my engine from my 02 ws6. Ive got eveything detached and ready to lift the body off of the

    Thedub Yesterday, 09:59 PM Go to last post
    sjgreen6

    y pipe

    The SLP y-pipe on mine is as tight to the floor as possible and it is the lowest point on the undercarriage. It sits about an additional inch to inch

    sjgreen6 Yesterday, 05:19 PM Go to last post
  • Sponsors