Results 1 to 20 of 21
-
03-06-2007, 07:56 PM #1
- Join Date
- Aug 2006
- Location
- illinois
- Age
- 52
- Posts
- 75
- iTrader
- 0
red- 99 Z28 SS convertible
Patriot heads, TSP cam, Comp lifters, Pacesetter long tubes
well, here i go! changing the combination that ran just fine. going to supercharger, so out goes the n/a setup. I have the Patriot cnc heads complete, TSP hyd. roller w/ Comp Cams lifters, coated Pacesetter long tubes with a custom ORY. all gotta go!
99ss 'vert ran 11.50's n/a with a TCI 400 stall, 3.23 gears, speed inc tune. obviously theres other stuff to do that, but this is the heart of the combo.
Patriot heads complete 700.00
TSP cam, Comp lifters 275.00
Pacesetter's and ORY 375.00
if interested, i can get some pics taken and email.
pm back for info
-
03-06-2007, 08:42 PM #2
- Join Date
- Mar 2007
- Location
- NC
- Posts
- 9
- iTrader
- 0
Silver- 1998 Z28 Camaro
What condition are the headers and ory in? Any dents, leaks, etc? Send pics to saclay77@yahoo.com Thanks
Last edited by underated98z; 03-06-2007 at 10:11 PM.
98 Z28 Camaro: FRA, Flowmaster muffler, K&N, Cutout, and 4.10's
1/8 mile: 8.24 @ 86mph on street tires
1/4 mile: 12.78 @ 110mph
-
03-06-2007, 09:27 PM #3
How many miles on the heads/cam?
Are the heads milled?
What springs?
What's the specs on the cam and do you have the cam card?
-
03-06-2007, 09:40 PM #4
- Join Date
- Jan 2007
- Location
- 305
- Posts
- 6
- iTrader
- 0
interested in the headers and ory. pics of headers and y to twyss001@yahoo.com ?
-
03-06-2007, 09:51 PM #5
- Join Date
- Aug 2005
- Location
- Clifton Hts.,Pa.
- Age
- 67
- Posts
- 62
- iTrader
- 0
Black- 2001 Camaro SS
All info on whole package to Tom01SS@aol.com
-
03-07-2007, 05:37 AM #6
PM sent; definitely interested in the whole package!!
-
03-07-2007, 06:04 AM #7
- Join Date
- Aug 2006
- Location
- illinois
- Age
- 52
- Posts
- 75
- iTrader
- 0
red- 99 Z28 SS convertible
this setup was on my car when i bought it. i know the owner. he only put about 6-7000 miles on it, then i put 1200 on it. the springs are the standard beehive type springs that come on the patriot's, should be good to 600 lift. the heads have not been off since new, so they should still have the factory surface. there was no evidence of leakage anywhere. GM mls gaskets were used. i believe the cam is the tsp special grind 585. im not sure of this. i have sent a email to the owner to see if he can send a fax of the cam card. if not i will call tsp to see what it is.
-
03-07-2007, 08:13 AM #8
- Join Date
- Jan 2007
- Location
- Guadalajara Mexico
- Posts
- 15
- iTrader
- 0
Red- Z28 M6 1998
I would take the heads an the cam just send me the pictures to chuytec@hotmail.com paypal ready thank you
-
03-07-2007, 08:51 PM #9
- Join Date
- Aug 2006
- Location
- illinois
- Age
- 52
- Posts
- 75
- iTrader
- 0
red- 99 Z28 SS convertible
all the parts except the headers and ory are at the engine shop. they were supposed to disassemble the engine and do cleanup/inspection. i'll have to go there to get pics of those. i should be able to post them by friday.
the Pacesetters are the 1-3/4's and have the emissions block-offs.
i did contact the original owner about the cam. he says it is a Comp Cams special grind from Speed Inc. it's the S12 cam, 224 duration and 581 lift on int and exh, 112 lsa
-
03-08-2007, 05:39 AM #10
E-mail sent. Can you give specifics on the heads...Patriot Stage _ ? Valve size? Flow #'s? VERY interested in the entire package.
-
03-09-2007, 04:40 PM #11
- Join Date
- Aug 2006
- Location
- illinois
- Age
- 52
- Posts
- 75
- iTrader
- 0
red- 99 Z28 SS convertible
bummer... I went to the engine shop today to get my parts and got bad news from them. the #1 intake runner has a small crack in the short side floor. you couldn't even see the crack, but I'm not the type of person to sell junk, so the deals off. sorry to you guys that were interested. this was caused by Patriot porting the runners too thin. I'm trading the heads/cam and some cash to the shop for a new set of Dart's and a custom Cam Motion grind.
however, the Pacesetters and ory are still available. I also have a ASP balancer that may be available, as soon as i figure out if the pulley works or not. I will post it up later if it becomes a for sale item.
i also still have the Comp hyd. roller lifters available. not sure what they're worth, but i'd say 100.00 takes them
-
03-10-2007, 04:22 AM #12
Let me know on the ASP pulley, I am very interested when you get the chance. Larry.
-
03-10-2007, 07:16 AM #13
- Join Date
- Jan 2007
- Location
- Guadalajara Mexico
- Posts
- 15
- iTrader
- 0
Red- Z28 M6 1998
maybe i can take the cam an the roller lifters just send me a picture of them an what size also thank you
-
03-10-2007, 07:56 AM #14
- Join Date
- Jan 2006
- Location
- Hamilton
- Posts
- 28
- iTrader
- 0
You're a good man. I think we all appreciate your honesty.
-
03-10-2007, 07:58 AM #15
headers
pics of headers to homerunhtr21@aol.com
-
03-10-2007, 01:35 PM #16
- Join Date
- Aug 2006
- Location
- illinois
- Age
- 52
- Posts
- 75
- iTrader
- 0
red- 99 Z28 SS convertible
-
03-10-2007, 03:16 PM #17
-
03-10-2007, 06:38 PM #18
- Join Date
- Aug 2006
- Location
- illinois
- Age
- 52
- Posts
- 75
- iTrader
- 0
red- 99 Z28 SS convertible
-
03-10-2007, 07:32 PM #19
Cool thanks, just say the word. Larry.
-
05-06-2007, 04:02 PM #20
- Join Date
- May 2007
- Location
- Miami,FL
- Posts
- 7
- iTrader
- 0
How much just for the headers?? shippin to 33178?>
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
pacesetter long tubes
By JunkyardZ in forum External EngineReplies: 5Last Post: 01-31-2010, 06:38 PM -
pacesetter long tubes & y pipe
By johnny_b in forum External EngineReplies: 24Last Post: 08-29-2007, 06:39 PM -
SLP y-pipe+pacesetter long tubes?
By NE98LS1 in forum External EngineReplies: 3Last Post: 12-28-2005, 08:35 PM -
Pacesetter Long Tubes for '00 SS
By SSwt00SS in forum Camaro / SSReplies: 0Last Post: 12-28-2005, 11:25 AM -
Ported 4.8 Heads & Comp R Lifters
By Fubarredz in forum Texas MembersReplies: 1Last Post: 09-02-2005, 08:07 PM
Bookmarks