Results 1 to 4 of 4
-
03-21-2007, 03:20 AM #1
- Join Date
- Aug 2006
- Location
- Sandbox, Kuwait
- Age
- 44
- Posts
- 247
Black- 06 Chevy Caprice HT (RIP)
Need Driveshaft supplier Please!!!!
HEY All,
I got a serious driveshaft (DS) issue...
Allow me to get you all up to speed, i changed my transmission from an auto to manual. I used kind of wrong parts, but modified the chassis and it all works...
Now to my issue, i found my stock DS was too short, so i made an adaptor to lengthen it, but i also needed another universal so it turns smoothly. So i scarpped the original idea found a slip joint and universal joint welded them to a pipe...
At first i had a visious vibratation, so i took the DS off and found the universals had some play...I removed the play, assured centered position and found a 2mm curve to the pipe....That would be 0.07874" curve...
The vibration is present from 40mph up...
I am lookin for DS parts so i may measure in a new carbonfiber DS...can anyone help?
I need a slip yoke universal, and universal joint...Both about 3" diameter, and able to rev up to 12500rpm...
Please, being overseas does not help, and time is passin me by...
Thank you for your timeLast edited by Naf; 04-04-2007 at 04:58 AM.
-
03-22-2007, 10:25 AM #2
Yes you need to call Tony over at Inland he can take care of you.
http://www.iedls.com/Don't be afraid of the bottle!!! Be afraid of your tune!!!
-
03-23-2007, 02:15 AM #3
- Join Date
- Aug 2006
- Location
- Sandbox, Kuwait
- Age
- 44
- Posts
- 247
Black- 06 Chevy Caprice HT (RIP)
Thanks for the tip
Lets hope he is up to the challenge and can help me out...
-
03-23-2007, 02:11 PM #4
- Join Date
- Feb 2006
- Location
- Orange County, NY
- Age
- 48
- Posts
- 2,693
always dirty- 2013 Ram 2014 Caddy ATS
you could also try dennysdriveshaft.com
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
GM suing supplier to keep Camaro production going
By doberman 152 in forum Almost Anything GoesReplies: 8Last Post: 12-29-2008, 12:41 AM -
LS1 Driveshaft
By Badman in forum Parts Wanted / TradeReplies: 6Last Post: 11-30-2008, 11:32 AM -
I need a driveshaft!
By 02Ls1Formula in forum Southern MembersReplies: 0Last Post: 05-13-2008, 01:46 PM -
Driveshaft???
By paugust73 in forum DrivetrainReplies: 3Last Post: 07-02-2007, 01:11 PM
Bookmarks