Lane's True Duals

**blackhawk01** · 01-08-2008, 09:26 AM

Okay, I have a guy around here where I live who said he would let go of some Lanes True Duals for about 300. I have stock exhaust manifolds so ill probably have to get a welding shop to fix something up for me until I get my headers...does this sounds like a good price and a good setup?

another question..is there any way the shop would be able to clamp it on the TD's rather than weld it on...that way I can save the spot for the headers?

**blackhawk01** · 01-08-2008, 10:09 AM

and will they fit on Pacesetter LT's?

**blackhawk01** · 01-08-2008, 12:55 PM

does anyone have any experience with these?

**blackbird99** · 01-08-2008, 01:05 PM

im sure i can be done,they would have to go over the td piping and clamp it dowm.

**180ls1** · 01-08-2008, 01:15 PM

Originally Posted by blackhawk01

does anyone have any experience with these?

I was going to go the exact same route for the longest time but the chaepest could find was 140 to have them fabbed up and by the time you have it all said and done you are looking at $450 plus and you still have stock manifolds. Instead i am doing to build a catback like the one in the link below. the duals would only give you a few more horsepower for the price they cost. I do not believe they are worth it. I am going to a catback like the one in the link untill i get lt's i would bet the performance would be pretty close to true duals. the setup i am going to run will cost me less then $200 and will flow extremely well.

http://www.ls1.com/forums/showthread.php?p=1193063

**blackhawk01** · 01-08-2008, 01:19 PM

but I mean..if I get the specially fabbed up..I could just use teh True Duals in the mean time mainly for the sound right?

**180ls1** · 01-08-2008, 01:28 PM

Originally Posted by blackhawk01

but I mean..if I get the specially fabbed up..I could just use teh True Duals in the mean time mainly for the sound right?

yes if you have another 150 or more dollars to spend again to get them to fit the lt's. you should go talk to a shop and see if a guy will cut a deal

**blackhawk01** · 01-08-2008, 01:39 PM

just got off the phone with a shop...they said to fab it up they would probably have to ruin the TD's just to get it to fit because they are made to just slide on the headers... I might as well just go ahed and buy them and then wait until I get headers

**blackbird99** · 01-08-2008, 01:43 PM

this is what i got for $200 http://www.texas-speed.com/shop/item...d=195&catid=46 about a month ago i think it went up on price but i bet they can cut you a deal.its real easy to install it took me about an hour to install it and sounds mean!!!

**180ls1** · 01-08-2008, 01:45 PM

Originally Posted by blackhawk01

just got off the phone with a shop...they said to fab it up they would probably have to ruin the TD's just to get it to fit because they are made to just slide on the headers... I might as well just go ahed and buy them and then wait until I get headers

ya that is probably your best bet. do you have a catback on there right now?

**blackhawk01** · 01-08-2008, 01:47 PM

nothing..just stock exhaust

...stock flat ORY...lol

**blackhawk01** · 01-08-2008, 01:48 PM

Originally Posted by blackbird99

this is what i got for $200 http://www.texas-speed.com/shop/item...d=195&catid=46 about a month ago i think it went up on price but i bet they can cut you a deal.its real easy to install it took me about an hour to install it and sounds mean!!!

hey man that looks pretty cool...would you happen to have a soundclip of yours ?

**blackbird99** · 01-08-2008, 01:51 PM

Originally Posted by blackhawk01

hey man that looks pretty cool...would you happen to have a soundclip of yours ?

no but u can go to ls1sounds.com

**9t8z28** · 01-08-2008, 03:33 PM

Originally Posted by blackhawk01

Okay, I have a guy around here where I live who said he would let go of some Lanes True Duals for about 300. I have stock exhaust manifolds so ill probably have to get a welding shop to fix something up for me until I get my headers...does this sounds like a good price and a good setup?

another question..is there any way the shop would be able to clamp it on the TD's rather than weld it on...that way I can save the spot for the headers?

What are Lane's True Duals? Do you have a link?