just installed my clutch

**blue02Z** · 01-16-2007, 06:41 PM

well i just installed my ls7 clutch and flywheel. also a new slave and master with the drill mod. did it all myself with a little help from one of my buddies and just letting ya'll know it was a royal pain in the ass. thanks for listening to me vent.

**Wesman** · 01-16-2007, 09:01 PM

What was so bad?? Dropping and reinstalling the trans?? Thats usually the worst part, the clutch swap itself should be easy. Of course bleeding the clutch system can be a PITA too, if you have to do that.

Let us know how it is, lots of guys have had good luck with the LS7 clutch kit.

**Danger731** · 01-17-2007, 01:30 AM

Took me 8 hours for mine. PITA

**blue02Z** · 01-17-2007, 03:39 AM

yea, getting the trans out was ok, but stabbing it was a diff. story. them master cylinder was a tough too.

**DarknessLS1** · 02-04-2007, 06:54 PM

i threaded(only a lil) the long tranny mount bolt to help guide the tranny back in on the bellhousing. slids right in. its alot easier after the first time