Moser 9"

**M-Ten** · 12-05-2007, 01:46 PM

I'm sure this has already been answered somewhere, but I can't find it. I am gonna upgrade my stock rearend to the Moser 9" for my 99 M6 t/a.

Where can I find it? And does it all come together or do I have to get all different parts from different places?

I don't know a lot about changing a rear end which is why i ask, thanks a lot

**Jays00ss** · 12-05-2007, 05:11 PM

I bought mine From a vendor on eBay. It comes complete with everything you need for the install with the exception of a few items. You will need a Conversion U-Joint, 2 3" exhaust clamps (to mount your sway bar), and you will need to use your backing plates for your brakes from your 10 bolt.

It will come to you in 4 boxes. 1st box is your axles, 2nd your rear end housing. 3rd the assembled third member. and 4th your torque arm mount.

When you get it all there is some sub assembly you will have to do. It is really not that bad and there are plenty of assembly instructions on the net or "Other forums"

If you can't find them, let me know and I will send you in the right direction. Hope this helps.

**BIG D's SS** · 12-05-2007, 05:12 PM

Texas SPeed, Year One, there is several places that offer them.

**Jays00ss** · 12-05-2007, 05:18 PM

pm sent for where I bought mine. Outstanding customer service and best prices you'll find.

**slims00ls1z28** · 12-08-2007, 09:19 AM

You have to get the bearings pressed onto the axles as well other than that it is summed up good here. Piece of cake. I'd rather do it than try to install headers again